mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Eugen Hristev <eugen.hristev@microchip.com>
To: <dave.stevenson@raspberrypi.com>, <andrey.konovalov@linaro.org>,
	<sakari.ailus@iki.fi>, <linux-media@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Subject: [PATCH] media: i2c: imx219: add support for enum frame interval
Date: Thu, 27 Feb 2020 17:17:52 +0200	[thread overview]
Message-ID: <20200227151752.21985-1-eugen.hristev@microchip.com> (raw)

Add support for enum frame intervals IOCTL.
The current supported framerates are only available as comments inside
the code.
Add support for VIDIOC_ENUM_FRAMEINTERVALS as the enum_frame_interval
callback as pad ops.

 # v4l2-ctl --list-frameintervals width=1920,height=1080,pixelformat=RG10
 ioctl: VIDIOC_ENUM_FRAMEINTERVALS
        Interval: Discrete 0.067s (15.000 fps)
        Interval: Discrete 0.033s (30.000 fps)
        Interval: Discrete 0.033s (30.000 fps)

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---

Hello,

This is on top of Sakari's tree in linuxtv.org

Thanks
Eugen

 drivers/media/i2c/imx219.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index f1effb5a5f66..17fcedd4edb6 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -127,6 +127,8 @@ struct imx219_mode {
 	unsigned int width;
 	/* Frame height */
 	unsigned int height;
+	/* Frame rate */
+	u8 fps;
 
 	/* V-timing */
 	unsigned int vts_def;
@@ -381,6 +383,7 @@ static const struct imx219_mode supported_modes[] = {
 		/* 8MPix 15fps mode */
 		.width = 3280,
 		.height = 2464,
+		.fps = 15,
 		.vts_def = IMX219_VTS_15FPS,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
@@ -391,6 +394,7 @@ static const struct imx219_mode supported_modes[] = {
 		/* 1080P 30fps cropped */
 		.width = 1920,
 		.height = 1080,
+		.fps = 30,
 		.vts_def = IMX219_VTS_30FPS_1080P,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
@@ -401,6 +405,7 @@ static const struct imx219_mode supported_modes[] = {
 		/* 2x2 binned 30fps mode */
 		.width = 1640,
 		.height = 1232,
+		.fps = 30,
 		.vts_def = IMX219_VTS_30FPS_BINNED,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
@@ -680,6 +685,27 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static int imx219_enum_frame_interval(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_pad_config *cfg,
+				      struct v4l2_subdev_frame_interval_enum *fie)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+
+	if (fie->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	if (fie->code != imx219_get_format_code(imx219))
+		return -EINVAL;
+
+	if (fie->pad)
+		return -EINVAL;
+
+	fie->interval.numerator = 1;
+	fie->interval.denominator = supported_modes[fie->index].fps;
+
+	return 0;
+}
+
 static void imx219_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
 {
 	fmt->colorspace = V4L2_COLORSPACE_SRGB;
@@ -1004,6 +1030,7 @@ static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
 	.get_fmt = imx219_get_pad_format,
 	.set_fmt = imx219_set_pad_format,
 	.enum_frame_size = imx219_enum_frame_size,
+	.enum_frame_interval = imx219_enum_frame_interval,
 };
 
 static const struct v4l2_subdev_ops imx219_subdev_ops = {
-- 
2.20.1


             reply	other threads:[~2020-02-27 15:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-27 15:17 Eugen Hristev [this message]
2020-02-28 13:44 ` Dave Stevenson
2020-02-28 14:05   ` Eugen.Hristev
2020-02-28 14:16     ` Dave Stevenson
2020-02-28 14:34       ` Eugen.Hristev
2020-02-28 14:55         ` Dave Stevenson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200227151752.21985-1-eugen.hristev@microchip.com \
    --to=eugen.hristev@microchip.com \
    --cc=andrey.konovalov@linaro.org \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=sakari.ailus@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®