From: Paul Cercueil <paul@crapouillou.net>
To: Harvey Hunt <harveyhuntnexus@gmail.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
od@zcrc.me, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org,
Paul Cercueil <paul@crapouillou.net>,
stable@vger.kernel.org
Subject: [PATCH] mtd: rawnand: ingenic: Fix unmet dependency if COMPILE_TEST
Date: Sat, 29 Feb 2020 13:04:43 -0300 [thread overview]
Message-ID: <20200229160443.11208-1-paul@crapouillou.net> (raw)
Commit 7c779cf7c1f7 ("mtd: rawnand: ingenic: Allow to compile test the
new Ingenic driver") dropped the dependency on JZ4780_NEMC when
COMPILE_TEST was set, which is wrong, as the driver requires symbols
provided by the jz4780-nemc driver.
Change the dependency to (MIPS || COMPILE_TEST) && JZ4780_NEMC to
address the issue.
Fixes: 7c779cf7c1f7 ("mtd: rawnand: ingenic: Allow to compile test the new Ingenic driver")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/mtd/nand/raw/ingenic/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
index 485abfa3f80b..96c5ae8b1bbc 100644
--- a/drivers/mtd/nand/raw/ingenic/Kconfig
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -1,7 +1,8 @@
# SPDX-License-Identifier: GPL-2.0-only
config MTD_NAND_JZ4780
tristate "JZ4780 NAND controller"
- depends on JZ4780_NEMC || COMPILE_TEST
+ depends on MIPS || COMPILE_TEST
+ depends on JZ4780_NEMC
help
Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
based boards, using the BCH controller for hardware error correction.
--
2.25.1
next reply other threads:[~2020-02-29 16:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-29 16:04 Paul Cercueil [this message]
2020-03-02 9:26 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200229160443.11208-1-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=harveyhuntnexus@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=od@zcrc.me \
--cc=richard@nod.at \
--cc=stable@vger.kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®