From: Niklas <niklas.soderlund@ragnatech.se>
To: Lad Prabhakar <prabhakar.csengg@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH 2/2] media: rcar-vin: Add support for SRGGB8_1X8
Date: Wed, 4 Mar 2020 21:55:16 +0100 [thread overview]
Message-ID: <20200304205516.GD1791497@oden.dyn.berto.se> (raw)
In-Reply-To: <20200228165011.17898-3-prabhakar.mahadev-lad.rj@bp.renesas.com>
Hi Lad,
Thanks for your work.
On 2020-02-28 16:50:11 +0000, Lad Prabhakar wrote:
> Most of the RZ/G2x boards can support capturing frames in SRGGB8_1X8
> format, add support for this with a runtime check that the running
> hardware supports it.
Where is the runtime check for supported hardware? Also out of curiosity
which boars can't support SRGGB and what setup are you using to test
SRGGB capture?
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> drivers/media/platform/rcar-vin/rcar-core.c | 1 +
> drivers/media/platform/rcar-vin/rcar-csi2.c | 1 +
> drivers/media/platform/rcar-vin/rcar-dma.c | 14 ++++++++++++--
> drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++++
This patch shall be split in two. One which touches rcar-csi2.c and one
for the other files as they are two different drivers.
> 4 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> index 7440c8965d27..76daf2fe5bcd 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -469,6 +469,7 @@ static int rvin_parallel_subdevice_attach(struct rvin_dev *vin,
> case MEDIA_BUS_FMT_UYVY8_2X8:
> case MEDIA_BUS_FMT_UYVY10_2X10:
> case MEDIA_BUS_FMT_RGB888_1X24:
> + case MEDIA_BUS_FMT_SRGGB8_1X8:
> vin->mbus_code = code.code;
> vin_dbg(vin, "Found media bus format for %s: %d\n",
> subdev->name, vin->mbus_code);
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index 5b04e4768eb1..97e4886f63f0 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -320,6 +320,7 @@ static const struct rcar_csi2_format rcar_csi2_formats[] = {
> { .code = MEDIA_BUS_FMT_YUYV8_1X16, .datatype = 0x1e, .bpp = 16 },
> { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 16 },
> { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 20 },
> + { .code = MEDIA_BUS_FMT_SRGGB8_1X8, .datatype = 0x2a, .bpp = 8 },
> };
>
> static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index 1a30cd036371..63709b4bbf7a 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -85,6 +85,7 @@
> #define VNMC_INF_YUV8_BT601 (1 << 16)
> #define VNMC_INF_YUV10_BT656 (2 << 16)
> #define VNMC_INF_YUV10_BT601 (3 << 16)
> +#define VNMC_INF_RAW8 (4 << 16)
> #define VNMC_INF_YUV16 (5 << 16)
> #define VNMC_INF_RGB888 (6 << 16)
> #define VNMC_VUP (1 << 10)
> @@ -587,13 +588,15 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
> rvin_write(vin, vin->crop.top, VNSLPRC_REG);
> rvin_write(vin, vin->crop.top + vin->crop.height - 1, VNELPRC_REG);
>
> -
> /* TODO: Add support for the UDS scaler. */
> if (vin->info->model != RCAR_GEN3)
> rvin_crop_scale_comp_gen2(vin);
>
> fmt = rvin_format_from_pixel(vin, vin->format.pixelformat);
> - stride = vin->format.bytesperline / fmt->bpp;
> + if (vin->format.pixelformat == V4L2_PIX_FMT_SRGGB8)
> + stride = ALIGN(vin->format.bytesperline / 2, 0x10);
> + else
> + stride = vin->format.bytesperline / fmt->bpp;
This does not look right, you should to move this logic into
rvin_format_bytesperline().
> rvin_write(vin, stride, VNIS_REG);
> }
>
> @@ -676,6 +679,9 @@ static int rvin_setup(struct rvin_dev *vin)
>
> input_is_yuv = true;
> break;
> + case MEDIA_BUS_FMT_SRGGB8_1X8:
> + vnmc |= VNMC_INF_RAW8;
> + break;
> default:
> break;
> }
> @@ -737,6 +743,9 @@ static int rvin_setup(struct rvin_dev *vin)
> case V4L2_PIX_FMT_ABGR32:
> dmr = VNDMR_A8BIT(vin->alpha) | VNDMR_EXRGB | VNDMR_DTMD_ARGB;
> break;
> + case V4L2_PIX_FMT_SRGGB8:
> + dmr = 0;
> + break;
> default:
> vin_err(vin, "Invalid pixelformat (0x%x)\n",
> vin->format.pixelformat);
> @@ -1110,6 +1119,7 @@ static int rvin_mc_validate_format(struct rvin_dev *vin, struct v4l2_subdev *sd,
> case MEDIA_BUS_FMT_UYVY8_2X8:
> case MEDIA_BUS_FMT_UYVY10_2X10:
> case MEDIA_BUS_FMT_RGB888_1X24:
> + case MEDIA_BUS_FMT_SRGGB8_1X8:
> vin->mbus_code = fmt.format.code;
> break;
> default:
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index b12b3f88836a..d56cf85ba065 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -66,6 +66,10 @@ static const struct rvin_video_format rvin_formats[] = {
> .fourcc = V4L2_PIX_FMT_ABGR32,
> .bpp = 4,
> },
> + {
> + .fourcc = V4L2_PIX_FMT_SRGGB8,
> + .bpp = 1,
> + },
> };
>
> const struct rvin_video_format *rvin_format_from_pixel(struct rvin_dev *vin,
> --
> 2.20.1
>
--
Regards,
Niklas Söderlund
next prev parent reply other threads:[~2020-03-04 20:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 16:50 [PATCH 0/2] media: rcar-vin: feature enhancement and fixes Lad Prabhakar
2020-02-28 16:50 ` [PATCH 1/2] media: rcar-csi2: Fix registering camera endpoint to VIN Lad Prabhakar
2020-03-04 20:47 ` Niklas
2020-03-07 13:03 ` Lad, Prabhakar
2020-02-28 16:50 ` [PATCH 2/2] media: rcar-vin: Add support for SRGGB8_1X8 Lad Prabhakar
2020-03-04 20:55 ` Niklas [this message]
2020-03-07 13:09 ` Lad, Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200304205516.GD1791497@oden.dyn.berto.se \
--to=niklas.soderlund@ragnatech.se \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®