mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: <Sergey.Semin@baikalelectronics.ru>
To: unlisted-recipients:; (no To-header on input)
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>,
	Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>,
	Vadim Vlasov <V.Vlasov@baikalelectronics.ru>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Paul Burton <paulburton@kernel.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	<soc@kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 0/6] soc: Add Baikal-T1 SoC APB/AXI EHB and L2-cache drivers
Date: Fri, 6 Mar 2020 16:07:15 +0300	[thread overview]
Message-ID: <20200306130731.938808030702@mail.baikalelectronics.ru> (raw)

From: Serge Semin <fancer.lancer@gmail.com>

Aside from PCIe/SATA/DDR/I2C/CPU-reboot specific settings the Baikal-T1
system controller provides three vendor-specific blocks. In particular
there are two Errors Handler Blocks to detect and report an info regarding
any problems discovered on the AXI and APB buses. These are the main buses
utilized by the SoC devices to interact with each other. In addition there
is a way to tune the MIPS P5600 CM2 L2-cache up by setting the Tag/Data/WS
L2-to-RAM latencies. All of this functionality is implemented in the
APB/AXI EHB and L2-cache control block drivers to be a part of the kernel soc
subsystem (as being specific to the Baikal-T1 SoC) and introduced in the
framework of this patchset.

This patchset is rebased and tested on the mainline Linux kernel 5.6-rc4:
commit 98d54f81e36b ("Linux 5.6-rc4").

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>
Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: soc@kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Serge Semin (6):
  dt-bindings: Add Baikal-T1 AXI-bus EHB dts bindings file
  dt-bindings: Add Baikal-T1 APB-bus EHB dts bindings file
  dt-bindings: Add Baikal-T1 L2-cache Control Block dts bindings file
  soc: bt1: Add Baikal-T1 AXI-bus EHB driver
  soc: bt1: Add Baikal-T1 APB-bus EHB driver
  soc: bt1: Add Baikal-T1 L2-cache Control Block driver

 .../soc/baikal-t1/be,bt1-apb-ehb.yaml         |  66 +++
 .../soc/baikal-t1/be,bt1-axi-ehb.yaml         |  52 +++
 .../bindings/soc/baikal-t1/be,bt1-l2-ctl.yaml | 108 +++++
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/baikal-t1/Kconfig                 |  49 +++
 drivers/soc/baikal-t1/Makefile                |   4 +
 drivers/soc/baikal-t1/apb-ehb.c               | 381 ++++++++++++++++++
 drivers/soc/baikal-t1/axi-ehb.c               | 250 ++++++++++++
 drivers/soc/baikal-t1/common.h                |  37 ++
 drivers/soc/baikal-t1/l2-ctl.c                | 325 +++++++++++++++
 11 files changed, 1274 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/baikal-t1/be,bt1-apb-ehb.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/baikal-t1/be,bt1-axi-ehb.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/baikal-t1/be,bt1-l2-ctl.yaml
 create mode 100644 drivers/soc/baikal-t1/Kconfig
 create mode 100644 drivers/soc/baikal-t1/Makefile
 create mode 100644 drivers/soc/baikal-t1/apb-ehb.c
 create mode 100644 drivers/soc/baikal-t1/axi-ehb.c
 create mode 100644 drivers/soc/baikal-t1/common.h
 create mode 100644 drivers/soc/baikal-t1/l2-ctl.c

-- 
2.25.1


             reply	other threads:[~2020-03-06 13:07 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-06 13:07 Sergey.Semin [this message]
2020-03-06 15:19 ` Arnd Bergmann
2020-03-12 21:25   ` Rob Herring
2020-04-01 15:32     ` Sergey Semin
2020-03-26 14:12   ` Arnd Bergmann
2020-04-01 15:37     ` Sergey Semin
2020-03-12 21:26 ` Rob Herring
     [not found] ` <20200306153246.9373B80307C4@mail.baikalelectronics.ru>
2020-04-01 15:06   ` Sergey Semin
2020-04-01 19:10     ` Arnd Bergmann
2020-04-01 21:52       ` Sergey Semin
2020-05-07 22:41 ` [PATCH v2 0/4] bus: Add Baikal-T1 SoC APB/AXI bus drivers Serge Semin
2020-05-07 22:41   ` [PATCH v2 1/4] dt-bindings: bus: Add Baikal-T1 AXI-bus binding Serge Semin
2020-05-15  3:13     ` Rob Herring
2020-05-07 22:41   ` [PATCH v2 2/4] dt-bindings: bus: Add Baikal-T1 APB-bus binding Serge Semin
2020-05-15  3:13     ` Rob Herring
2020-05-07 22:41   ` [PATCH v2 3/4] bus: Add Baikal-T1 AXI-bus driver Serge Semin
2020-05-07 22:41   ` [PATCH v2 4/4] bus: Add Baikal-T1 APB-bus driver Serge Semin
2020-05-07 23:07 ` [PATCH v2 0/2] memory: Add Baikal-T1 L2-cache driver Serge Semin
2020-05-07 23:07   ` [PATCH v2 1/2] dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding Serge Semin
2020-05-11 15:38     ` Rob Herring
2020-05-11 20:25       ` Serge Semin
     [not found]         ` <CAL_JsqJEZF5xkNGGiBy5rgUFfg=hWp6qi=tzFW84cGD9m-p5SA@mail.gmail.com>
2020-05-12 18:31           ` Serge Semin
     [not found]     ` <CAL_Jsq+rka7hXVy46=O3pTrN0DLCAQQ=TSpSqzoB2dxb30h66g@mail.gmail.com>
2020-05-12 18:25       ` Serge Semin
2020-05-19 12:27     ` Serge Semin
2020-05-07 23:07   ` [PATCH v2 2/2] memory: Add Baikal-T1 L2-cache Control Block driver Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200306130731.938808030702@mail.baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Ekaterina.Skachko@baikalelectronics.ru \
    --cc=Maxim.Kaurkin@baikalelectronics.ru \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Ramil.Zaripov@baikalelectronics.ru \
    --cc=V.Vlasov@baikalelectronics.ru \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=paulburton@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®