mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kevin Li <kevin-ke.li@broadcom.com>
To: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>, Ray Jui <rjui@broadcom.com>,
	Jaroslav Kysela <perex@perex.cz>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com,
	Stephen Boyd <swboyd@chromium.org>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Kevin Li <kevin-ke.li@broadcom.com>
Subject: [PATCH v2 2/2] ASoC: brcm:  DSL/PON SoC device tree bindings of audio driver
Date: Thu, 12 Mar 2020 15:32:40 -0700	[thread overview]
Message-ID: <20200312223242.2843-1-kevin-ke.li@broadcom.com> (raw)

Signed-off-by: Kevin Li <kevin-ke.li@broadcom.com>
---
 .../bindings/sound/brcm,bcm63xx-audio.txt     | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt

diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
new file mode 100644
index 000000000000..007f524b4d15
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
@@ -0,0 +1,29 @@
+Broadcom DSL/PON BCM63xx Audio I2S controller
+
+Required properties:
+- compatible:     Should be "brcm,bcm63xx-i2s".
+- #address-cells: 32bit valued, 1 cell.
+- #size-cells:    32bit valued, 0 cell.
+- reg:            Should contain audio registers location and length
+- interrupts:     Should contain the interrupt for the controller.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    One of each entry matching the clocks phandles list:
+                  - "i2sclk" (generated clock) Required.
+                  - "i2sosc" (fixed 200MHz clock) Required.
+
+(1) : The generated clock is required only when any of TX and RX
+      works on Master Mode.
+(2) : The fixed 200MHz clock is from internal chip and always on
+
+Example:
+
+		i2s: bcm63xx-i2s {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63xx-i2s";
+			reg = <0xFF802080 0xFF>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&i2sclk>, <&osc>;
+			clock-names = "i2sclk","i2sosc";
+		};
-- 
2.25.1


             reply	other threads:[~2020-03-12 22:33 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-12 22:32 Kevin Li [this message]
2020-03-12 22:32 ` [PATCH v2 1/2] ASoC: brcm: Add DSL/PON SoC " Kevin Li
2020-03-13 16:17   ` Applied "ASoC: brcm: Add DSL/PON SoC audio driver" to the asoc tree Mark Brown
2020-03-12 22:32 ` [PATCH v2 0/2] ASoC: brcm: add dsl and pon chip audio driver Kevin Li
2020-03-13 16:17 ` Applied "ASoC: brcm: DSL/PON SoC device tree bindings of audio driver" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200312223242.2843-1-kevin-ke.li@broadcom.com \
    --to=kevin-ke.li@broadcom.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=broonie@kernel.org \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=swboyd@chromium.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®