From: Colin King <colin.king@canonical.com>
To: Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>,
Arnaldo Carvalho de Melo <acme@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Jiri Olsa <jolsa@redhat.com>, Namhyung Kim <namhyung@kernel.org>,
Andi Kleen <ak@linux.intel.com>
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] perf vendor events: fix spelling mistakes: "occurences" -> "occurrences"
Date: Mon, 16 Mar 2020 09:38:53 +0000 [thread overview]
Message-ID: <20200316093853.117752-1-colin.king@canonical.com> (raw)
From: Colin Ian King <colin.king@canonical.com>
Fix spelling mistake of "occurrences"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json | 2 +-
tools/perf/pmu-events/arch/x86/ivytown/pipeline.json | 2 +-
tools/perf/pmu-events/arch/x86/jaketown/pipeline.json | 2 +-
.../perf/pmu-events/arch/x86/knightslanding/pipeline.json | 8 ++++----
tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json | 2 +-
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json b/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json
index 2a0aad91d83d..e5ca2d85e84d 100644
--- a/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json
@@ -80,7 +80,7 @@
"EdgeDetect": "1",
"EventName": "INT_MISC.RECOVERY_STALLS_COUNT",
"SampleAfterValue": "2000003",
- "BriefDescription": "Number of occurences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
+ "BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
"CounterMask": "1",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json
index 2a0aad91d83d..e5ca2d85e84d 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json
@@ -80,7 +80,7 @@
"EdgeDetect": "1",
"EventName": "INT_MISC.RECOVERY_STALLS_COUNT",
"SampleAfterValue": "2000003",
- "BriefDescription": "Number of occurences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
+ "BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
"CounterMask": "1",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
index 783a5b4a67b1..f32fd4aea6b1 100644
--- a/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
@@ -1019,7 +1019,7 @@
"EdgeDetect": "1",
"EventName": "INT_MISC.RECOVERY_STALLS_COUNT",
"SampleAfterValue": "2000003",
- "BriefDescription": "Number of occurences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).",
+ "BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).",
"CounterMask": "1",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json b/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json
index 92e4ef2e22c6..17c92cdedde0 100644
--- a/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json
@@ -340,7 +340,7 @@
"UMask": "0x1",
"EventName": "RECYCLEQ.LD_BLOCK_ST_FORWARD",
"SampleAfterValue": "200003",
- "BriefDescription": "Counts the number of occurences a retired load gets blocked because its address partially overlaps with a store",
+ "BriefDescription": "Counts the number of occurrences a retired load gets blocked because its address partially overlaps with a store",
"Data_LA": "1"
},
{
@@ -349,7 +349,7 @@
"UMask": "0x2",
"EventName": "RECYCLEQ.LD_BLOCK_STD_NOTREADY",
"SampleAfterValue": "200003",
- "BriefDescription": "Counts the number of occurences a retired load gets blocked because its address overlaps with a store whose data is not ready"
+ "BriefDescription": "Counts the number of occurrences a retired load gets blocked because its address overlaps with a store whose data is not ready"
},
{
"PublicDescription": "This event counts the number of retired store that experienced a cache line boundary split(Precise Event). Note that each spilt should be counted only once.",
@@ -358,7 +358,7 @@
"UMask": "0x4",
"EventName": "RECYCLEQ.ST_SPLITS",
"SampleAfterValue": "200003",
- "BriefDescription": "Counts the number of occurences a retired store that is a cache line split. Each split should be counted only once."
+ "BriefDescription": "Counts the number of occurrences a retired store that is a cache line split. Each split should be counted only once."
},
{
"PEBS": "1",
@@ -367,7 +367,7 @@
"UMask": "0x8",
"EventName": "RECYCLEQ.LD_SPLITS",
"SampleAfterValue": "200003",
- "BriefDescription": "Counts the number of occurences a retired load that is a cache line split. Each split should be counted only once.",
+ "BriefDescription": "Counts the number of occurrences a retired load that is a cache line split. Each split should be counted only once.",
"Data_LA": "1"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json b/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json
index b7150f65f16d..d69db55f33e7 100644
--- a/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json
@@ -108,7 +108,7 @@
"EdgeDetect": "1",
"EventName": "INT_MISC.RECOVERY_STALLS_COUNT",
"SampleAfterValue": "2000003",
- "BriefDescription": "Number of occurences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).",
+ "BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).",
"CounterMask": "1",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
--
2.25.1
next reply other threads:[~2020-03-16 9:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-16 9:38 Colin King [this message]
2020-03-16 13:58 ` Arnaldo Carvalho de Melo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200316093853.117752-1-colin.king@canonical.com \
--to=colin.king@canonical.com \
--cc=acme@kernel.org \
--cc=ak@linux.intel.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=jolsa@redhat.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®