From: Vladimir Oltean <olteanv@gmail.com>
To: broonie@kernel.org
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, eha@deif.com, angelo@sysam.it,
andrew.smirnov@gmail.com, gustavo@embeddedor.com,
weic@nvidia.com, mhosny@nvidia.com, michael@walle.cc,
peng.ma@nxp.com
Subject: [PATCH v5 10/12] spi: spi-fsl-dspi: Add support for LS1028A
Date: Wed, 18 Mar 2020 02:16:01 +0200 [thread overview]
Message-ID: <20200318001603.9650-11-olteanv@gmail.com> (raw)
In-Reply-To: <20200318001603.9650-1-olteanv@gmail.com>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
This is similar to the DSPI instantiation on LS1028A, except that:
- The A-011218 erratum has been fixed, so DMA works
- The endianness is different, which has implications on XSPI mode
Some benchmarking with the following command:
spidev_test --device /dev/spidev2.0 --bpw 8 --size 256 --cpha --iter 10000000 --speed 20000000
shows that in DMA mode, it can achieve around 2400 kbps, and in XSPI
mode, the same command goes up to 4700 kbps. This is somewhat to be
expected, since the DMA buffer size is extremely small at 8 bytes, the
winner becomes whomever can prepare the buffers for transmission
quicker, and DMA mode has higher overhead there. So XSPI FIFO mode has
been chosen as the operating mode for this chip.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v5:
None.
Changes in v4:
None.
Changes in v3:
Removed the dma_bufsize variable (obsoleted by 03/12).
Changes in v2:
Switch to DSPI_XSPI_MODE.
drivers/spi/spi-fsl-dspi.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 5873752a091e..50e41f66a2d7 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -124,6 +124,7 @@ struct fsl_dspi_devtype_data {
enum {
LS1021A,
LS1012A,
+ LS1028A,
LS1043A,
LS1046A,
LS2080A,
@@ -151,6 +152,11 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
.max_clock_factor = 8,
.fifo_size = 16,
},
+ [LS1028A] = {
+ .trans_mode = DSPI_XSPI_MODE,
+ .max_clock_factor = 8,
+ .fifo_size = 4,
+ },
[LS1043A] = {
/* Has A-011218 DMA erratum */
.trans_mode = DSPI_XSPI_MODE,
@@ -1050,6 +1056,9 @@ static const struct of_device_id fsl_dspi_dt_ids[] = {
}, {
.compatible = "fsl,ls1012a-dspi",
.data = &devtype_data[LS1012A],
+ }, {
+ .compatible = "fsl,ls1028a-dspi",
+ .data = &devtype_data[LS1028A],
}, {
.compatible = "fsl,ls1043a-dspi",
.data = &devtype_data[LS1043A],
--
2.17.1
next prev parent reply other threads:[~2020-03-18 0:17 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-18 0:15 [PATCH v5 00/12] NXP DSPI bugfixes and " Vladimir Oltean
2020-03-18 0:15 ` [PATCH v5 01/12] spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR Vladimir Oltean
2020-03-18 0:15 ` [PATCH v5 02/12] spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA Vladimir Oltean
2020-03-18 0:15 ` [PATCH v5 03/12] spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode Vladimir Oltean
2020-03-18 0:15 ` [PATCH v5 04/12] spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode Vladimir Oltean
2020-03-18 0:15 ` [PATCH v5 05/12] spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight Vladimir Oltean
2020-03-18 22:45 ` Applied "spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight" to the spi tree Mark Brown
2020-03-18 0:15 ` [PATCH v5 06/12] spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion Vladimir Oltean
2020-03-18 0:15 ` [PATCH v5 07/12] spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode Vladimir Oltean
2020-03-18 0:15 ` [PATCH v5 08/12] spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path Vladimir Oltean
2020-03-18 0:16 ` [PATCH v5 09/12] spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message Vladimir Oltean
2020-03-18 0:16 ` Vladimir Oltean [this message]
2020-03-18 0:16 ` [PATCH v5 11/12] arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers Vladimir Oltean
2020-04-20 14:36 ` Shawn Guo
2020-03-18 0:16 ` [PATCH v5 12/12] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS Vladimir Oltean
2020-04-20 14:38 ` Shawn Guo
2020-04-20 15:10 ` Vladimir Oltean
2020-04-21 3:00 ` Shawn Guo
2020-04-20 18:06 ` Geert Uytterhoeven
2020-04-20 18:10 ` Vladimir Oltean
2020-03-18 19:03 ` [PATCH v5 00/12] NXP DSPI bugfixes and support for LS1028A Michael Walle
2020-03-18 19:05 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200318001603.9650-11-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=andrew.smirnov@gmail.com \
--cc=angelo@sysam.it \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eha@deif.com \
--cc=gustavo@embeddedor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mhosny@nvidia.com \
--cc=michael@walle.cc \
--cc=peng.ma@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=weic@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome