From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net, andrew@lunn.ch, f.fainelli@gmail.com,
hkallweit1@gmail.com
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 1/2] net: phy: mscc: add support for RGMII MAC mode
Date: Thu, 19 Mar 2020 15:19:57 +0100 [thread overview]
Message-ID: <20200319141958.383626-2-antoine.tenart@bootlin.com> (raw)
In-Reply-To: <20200319141958.383626-1-antoine.tenart@bootlin.com>
This patch adds support for connecting VSC8584 PHYs to the MAC using
RGMII.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
drivers/net/phy/mscc/mscc.h | 1 +
drivers/net/phy/mscc/mscc_main.c | 32 ++++++++++++++++++++------------
2 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 29ccb2c9c095..d1b8bbe8acca 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -241,6 +241,7 @@ enum rgmii_rx_clock_delay {
#define MAC_CFG_MASK 0xc000
#define MAC_CFG_SGMII 0x0000
#define MAC_CFG_QSGMII 0x4000
+#define MAC_CFG_RGMII 0x8000
/* Test page Registers */
#define MSCC_PHY_TEST_PAGE_5 5
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index bc6beec8aff0..86bb5c3c911a 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1360,27 +1360,35 @@ static int vsc8584_config_init(struct phy_device *phydev)
val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK);
val &= ~MAC_CFG_MASK;
- if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
+ if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
val |= MAC_CFG_QSGMII;
- else
+ } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
val |= MAC_CFG_SGMII;
+ } else if (phy_interface_is_rgmii(phydev)) {
+ val |= MAC_CFG_RGMII;
+ } else {
+ ret = -EINVAL;
+ goto err;
+ }
ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
if (ret)
goto err;
- val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
- PROC_CMD_READ_MOD_WRITE_PORT;
- if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
- val |= PROC_CMD_QSGMII_MAC;
- else
- val |= PROC_CMD_SGMII_MAC;
+ if (!phy_interface_is_rgmii(phydev)) {
+ val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
+ PROC_CMD_READ_MOD_WRITE_PORT;
+ if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
+ val |= PROC_CMD_QSGMII_MAC;
+ else
+ val |= PROC_CMD_SGMII_MAC;
- ret = vsc8584_cmd(phydev, val);
- if (ret)
- goto err;
+ ret = vsc8584_cmd(phydev, val);
+ if (ret)
+ goto err;
- usleep_range(10000, 20000);
+ usleep_range(10000, 20000);
+ }
/* Disable SerDes for 100Base-FX */
ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
--
2.25.1
next prev parent reply other threads:[~2020-03-19 14:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-19 14:19 [PATCH net-next v3 0/2] " Antoine Tenart
2020-03-19 14:19 ` Antoine Tenart [this message]
2020-03-19 15:58 ` [PATCH net-next v3 1/2] " Andrew Lunn
2020-03-19 14:19 ` [PATCH net-next v3 2/2] net: phy: mscc: RGMII skew delay configuration Antoine Tenart
2020-03-19 16:05 ` Andrew Lunn
2020-03-19 16:17 ` Antoine Tenart
2020-03-19 16:52 ` Andrew Lunn
2020-03-20 4:15 ` [PATCH net-next v3 0/2] net: phy: mscc: add support for RGMII MAC mode David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200319141958.383626-2-antoine.tenart@bootlin.com \
--to=antoine.tenart@bootlin.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®