From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<bsz@semihalf.com>, <rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
<jiada_wang@mentor.com>
Subject: [PATCH v8 23/52] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func
Date: Thu, 19 Mar 2020 07:59:47 -0700 [thread overview]
Message-ID: <20200319150016.61398-24-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200319150016.61398-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Refactor code to enter bootloader into separate func
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit bedd706a32522b946467e15f4f4f24de86a1b4d7)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: Squash change from ndyer/linux/for-upstream commit d691d3ee6c6de84b38464a42
3207b3e23cb9dc3a
- Input: atmel_mxt_ts - check firmware format before entering bootloader
Add commit description]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 43 +++++++++++++++---------
1 file changed, 27 insertions(+), 16 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e5dc554a0845..b4d0835ba196 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3257,23 +3257,10 @@ static int mxt_check_firmware_format(struct device *dev,
return -EINVAL;
}
-static int mxt_load_fw(struct device *dev)
+static int mxt_enter_bootloader(struct mxt_data *data)
{
- struct mxt_data *data = dev_get_drvdata(dev);
- struct mxt_flash f = { 0, };
int ret;
- ret = request_firmware(&f.fw, data->fw_name, dev);
- if (ret) {
- dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
- return ret;
- }
-
- /* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, f.fw);
- if (ret)
- goto release_firmware;
-
if (data->suspended) {
if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
mxt_regulator_enable(data);
@@ -3291,14 +3278,14 @@ static int mxt_load_fw(struct device *dev)
ret = mxt_t6_command(data, MXT_COMMAND_RESET,
MXT_BOOT_VALUE, false);
if (ret)
- goto release_firmware;
+ return ret;
msleep(MXT_RESET_TIME);
/* Do not need to scan since we know family ID */
ret = mxt_lookup_bootloader_address(data, 0);
if (ret)
- goto release_firmware;
+ return ret;
mxt_sysfs_remove(data);
mxt_free_input_device(data);
@@ -3309,6 +3296,30 @@ static int mxt_load_fw(struct device *dev)
reinit_completion(&data->bl_completion);
+ return 0;
+}
+
+static int mxt_load_fw(struct device *dev)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_flash f = { 0, };
+ int ret;
+
+ ret = request_firmware(&f.fw, data->fw_name, dev);
+ if (ret) {
+ dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
+ return ret;
+ }
+
+ /* Check for incorrect enc file */
+ ret = mxt_check_firmware_format(dev, f.fw);
+ if (ret)
+ goto release_firmware;
+
+ ret = mxt_enter_bootloader(data);
+ if (ret)
+ goto release_firmware;
+
ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
if (ret) {
/* Bootloader may still be unlocked from previous attempt */
--
2.17.1
next prev parent reply other threads:[~2020-03-19 15:02 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-19 14:59 [PATCH v8 00/52] atmel_mxt_ts misc Jiada Wang
2020-03-19 14:59 ` [PATCH v8 01/52] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-19 14:59 ` [PATCH v8 02/52] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-19 14:59 ` [PATCH v8 03/52] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-19 14:59 ` [PATCH v8 04/52] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-19 14:59 ` [PATCH v8 05/52] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-19 14:59 ` [PATCH v8 06/52] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-19 14:59 ` [PATCH v8 07/52] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 08/52] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 09/52] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-19 14:59 ` [PATCH v8 10/52] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-19 14:59 ` [PATCH v8 11/52] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 12/52] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-19 14:59 ` [PATCH v8 13/52] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 14/52] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 15/52] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-19 14:59 ` [PATCH v8 16/52] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-19 14:59 ` [PATCH v8 17/52] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 18/52] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-19 14:59 ` [PATCH v8 19/52] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-19 14:59 ` [PATCH v8 20/52] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-19 14:59 ` [PATCH v8 21/52] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 22/52] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-19 14:59 ` Jiada Wang [this message]
2020-03-19 14:59 ` [PATCH v8 24/52] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-19 14:59 ` [PATCH v8 25/52] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-19 14:59 ` [PATCH v8 26/52] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-19 14:59 ` [PATCH v8 27/52] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-19 14:59 ` [PATCH v8 28/52] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-03-19 14:59 ` [PATCH v8 29/52] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-19 14:59 ` [PATCH v8 30/52] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-19 14:59 ` [PATCH v8 31/52] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-19 14:59 ` [PATCH v8 32/52] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-19 14:59 ` [PATCH v8 33/52] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-19 14:59 ` [PATCH v8 34/52] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-19 14:59 ` [PATCH v8 35/52] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-19 15:00 ` [PATCH v8 36/52] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-19 15:00 ` [PATCH v8 37/52] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-19 15:00 ` [PATCH v8 38/52] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-19 15:00 ` [PATCH v8 39/52] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-19 15:00 ` [PATCH v8 40/52] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-03-19 15:00 ` [PATCH v8 41/52] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 42/52] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 43/52] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 44/52] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 45/52] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 46/52] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-19 15:00 ` [PATCH v8 47/52] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-19 15:00 ` [PATCH v8 48/52] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-19 15:00 ` [PATCH v8 49/52] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-19 15:00 ` [PATCH v8 50/52] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-19 15:00 ` [PATCH v8 51/52] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-03-19 15:00 ` [PATCH v8 52/52] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200319150016.61398-24-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bsz@semihalf.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®