From: Stefan Mavrodiev <stefan@olimex.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Chen-Yu Tsai" <wens@csie.org>,
"Corentin Labbe" <clabbe@baylibre.com>,
"Stefan Mavrodiev" <stefan@olimex.com>,
"Clément Péron" <peron.clem@gmail.com>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/Allwinner sunXi SoC support),
linux-kernel@vger.kernel.org (open list)
Cc: linux-sunxi@googlegroups.com
Subject: [PATCH 1/2] ARM: dts: sun7i: Add A20-OLinuXino-LIME-eMMC
Date: Sat, 21 Mar 2020 09:57:56 +0200 [thread overview]
Message-ID: <20200321075757.15853-2-stefan@olimex.com> (raw)
In-Reply-To: <20200321075757.15853-1-stefan@olimex.com>
There is new version of A20-OLinuXino-LIME with eMMC storage. The
card routing is the same as in A20-OLinuXino-LIME2-eMMC, so this
is basically copy/paste.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/sun7i-a20-olinuxino-lime-emmc.dts | 32 +++++++++++++++++++
2 files changed, 33 insertions(+)
create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..6bf3c5a98a0f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1093,6 +1093,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olimex-som204-evb.dtb \
sun7i-a20-olimex-som204-evb-emmc.dtb \
sun7i-a20-olinuxino-lime.dtb \
+ sun7i-a20-olinuxino-lime-emmc.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 000000000000..033cab3443f8
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ * Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+ model = "Olimex A20-OLinuXino-LIME-eMMC";
+ compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+ mmc2_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ status = "okay";
+
+ emmc: emmc@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
--
2.17.1
next prev parent reply other threads:[~2020-03-21 7:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-21 7:57 [PATCH 0/2] " Stefan Mavrodiev
2020-03-21 7:57 ` Stefan Mavrodiev [this message]
2020-03-21 7:57 ` [PATCH 2/2] dt-bindings: arm: sunxi: Add compatible for A20-OLinuXino-LIME-eMMC Stefan Mavrodiev
2020-03-24 15:50 ` [PATCH 0/2] Add A20-OLinuXino-LIME-eMMC Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200321075757.15853-2-stefan@olimex.com \
--to=stefan@olimex.com \
--cc=clabbe@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=mripard@kernel.org \
--cc=peron.clem@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®