On Fri, Mar 06, 2020 at 04:19:54PM +0300, Sergey.Semin@baikalelectronics.ru wrote: > From: Serge Semin > > The problem with detecting the FIFO depth in the platform driver > is that in order to implement this we have to access the controller > IC_COMP_PARAM_1 register. Currently it's done before the > i2c_dw_set_reg_access() method execution, which is errors prone since > the method determines the registers endianness and access mode and we > can't use dw_readl/dw_writel accessors before this information is > retrieved. We also can't move the i2c_dw_set_reg_access() function > invocation to after the master/slave probe functions call (when endianness > and access mode are determined), since the FIFO depth information is used > by them for initializations. So in order to fix the problem we have no > choice but to move the FIFO size detection methods to the common code and > call it at the probe stage. > > Signed-off-by: Serge Semin > Signed-off-by: Alexey Malahov > Cc: Thomas Bogendoerfer > Cc: Paul Burton > Cc: Ralf Baechle > Cc: linux-i2c@vger.kernel.org > Cc: linux-kernel@vger.kernel.org Applied to for-next, thanks!