mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: <Sergey.Semin@baikalelectronics.ru>
To: Hoan Tran <hoan@os.amperecomputing.com>,
	Serge Semin <fancer.lancer@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Paul Burton <paulburton@kernel.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	"Enrico Weigelt, metux IT consult" <info@metux.net>,
	Allison Randal <allison@lohutok.net>,
	Thomas Gleixner <tglx@linutronix.de>,
	<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 5/6] gpio: dwapb: Add debounce reference clock support
Date: Mon, 23 Mar 2020 22:54:00 +0300	[thread overview]
Message-ID: <20200323195401.30338-6-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20200323195401.30338-1-Sergey.Semin@baikalelectronics.ru>

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

Aside from the APB reference clock DW GPIO controller can have a
dedicated clock connected to setup a debounce time interval for
GPIO-based IRQs. Since this functionality is optional the corresponding
clock source is also optional. Due to this lets handle the debounce
clock in the same way as it has been developed for the APB reference
clock, but using the bulk request/enable-disable methods.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>

---

Changelog v2:
- Print error instead of info-message if APB/debounce clocks either
  failed to be acquired or couldn't be enabled.
---
 drivers/gpio/gpio-dwapb.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 0c5abfa361e6..d2ed11510f3c 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -62,6 +62,8 @@
 #define GPIO_INTSTATUS_V2	0x3c
 #define GPIO_PORTA_EOI_V2	0x40
 
+#define DWAPB_NR_CLOCKS		2
+
 struct dwapb_gpio;
 
 #ifdef CONFIG_PM_SLEEP
@@ -97,7 +99,7 @@ struct dwapb_gpio {
 	struct irq_domain	*domain;
 	unsigned int		flags;
 	struct reset_control	*rst;
-	struct clk		*clk;
+	struct clk_bulk_data	clks[DWAPB_NR_CLOCKS];
 };
 
 static inline u32 gpio_reg_v2_convert(unsigned int offset)
@@ -689,16 +691,19 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(gpio->regs))
 		return PTR_ERR(gpio->regs);
 
-	/* Optional bus clock */
-	gpio->clk = devm_clk_get_optional(&pdev->dev, "bus");
-	if (IS_ERR(gpio->clk)) {
-		dev_err(&pdev->dev, "Cannot get APB clock\n");
-		return PTR_ERR(gpio->clk);
+	/* Optional bus and debounce clocks */
+	gpio->clks[0].id = "bus";
+	gpio->clks[1].id = "db";
+	err = devm_clk_bulk_get_optional(&pdev->dev, DWAPB_NR_CLOCKS,
+					 gpio->clks);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot get APB/Debounce clocks\n");
+		return err;
 	}
 
-	err = clk_prepare_enable(gpio->clk);
+	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
 	if (err) {
-		dev_err(&pdev->dev, "Cannot enable APB clock\n");
+		dev_err(&pdev->dev, "Cannot enable APB/Debounce clocks\n");
 		return err;
 	}
 
@@ -727,7 +732,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 out_unregister:
 	dwapb_gpio_unregister(gpio);
 	dwapb_irq_teardown(gpio);
-	clk_disable_unprepare(gpio->clk);
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
 
 	return err;
 }
@@ -739,7 +744,7 @@ static int dwapb_gpio_remove(struct platform_device *pdev)
 	dwapb_gpio_unregister(gpio);
 	dwapb_irq_teardown(gpio);
 	reset_control_assert(gpio->rst);
-	clk_disable_unprepare(gpio->clk);
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
 
 	return 0;
 }
@@ -784,7 +789,7 @@ static int dwapb_gpio_suspend(struct device *dev)
 	}
 	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
 
-	clk_disable_unprepare(gpio->clk);
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
 
 	return 0;
 }
@@ -794,9 +799,13 @@ static int dwapb_gpio_resume(struct device *dev)
 	struct dwapb_gpio *gpio = dev_get_drvdata(dev);
 	struct gpio_chip *gc	= &gpio->ports[0].gc;
 	unsigned long flags;
-	int i;
+	int i, err;
 
-	clk_prepare_enable(gpio->clk);
+	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
+	if (err) {
+		dev_err(gpio->dev, "Cannot reenable APB/Debounce clocks\n");
+		return err;
+	}
 
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
 	for (i = 0; i < gpio->nr_ports; i++) {
-- 
2.25.1


  parent reply	other threads:[~2020-03-23 19:54 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-06 13:24 [PATCH 0/4] gpio: dwapb: Fix reference clocks usage Sergey.Semin
2020-03-12 13:58 ` Linus Walleij
2020-03-13 15:29   ` Sergey Semin
2020-03-23 18:06 ` [PATCH v2 0/6] " Sergey.Semin
2020-03-23 18:06   ` [PATCH v2 1/6] dt-bindings: gpio: Convert snps,dw-apb-gpio to DT schema Sergey.Semin
2020-03-23 18:06   ` [PATCH v2 2/6] dt-bindings: gpio: Add DW GPIO debounce clock property Sergey.Semin
2020-03-23 18:06   ` [PATCH v2 3/6] dt-bindings: gpio: Add Sergey Semin to DW APB GPIO driver maintainers Sergey.Semin
2020-03-23 18:06   ` [PATCH v2 4/6] gpio: dwapb: Use optional-clocks interface for APB ref-clock Sergey.Semin
2020-03-23 18:36     ` Andy Shevchenko
2020-03-23 18:06   ` [PATCH v2 5/6] gpio: dwapb: Add debounce reference clock support Sergey.Semin
2020-03-23 18:38     ` Andy Shevchenko
2020-03-23 19:25       ` Sergey Semin
2020-03-23 21:37         ` Andy Shevchenko
2020-03-23 18:06   ` [PATCH v2 6/6] MAINTAINERS: Add Segey Semin to maintainers of DW APB GPIO driver Sergey.Semin
2020-03-23 18:34     ` Andy Shevchenko
2020-03-23 19:18       ` Sergey Semin
2020-03-23 18:36     ` Joe Perches
2020-03-23 19:16       ` Sergey Semin
2020-03-23 19:53   ` [PATCH v3 0/6] gpio: dwapb: Fix reference clocks usage Sergey.Semin
2020-03-23 19:53     ` [PATCH v3 1/6] dt-bindings: gpio: Convert snps,dw-apb-gpio to DT schema Sergey.Semin
2020-03-31 19:24       ` Rob Herring
2020-03-23 19:53     ` [PATCH v3 2/6] dt-bindings: gpio: Add DW GPIO debounce clock property Sergey.Semin
2020-03-23 19:53     ` [PATCH v3 3/6] dt-bindings: gpio: Add Sergey Semin to DW APB GPIO driver maintainers Sergey.Semin
2020-03-31 19:25       ` Rob Herring
2020-03-23 19:53     ` [PATCH v3 4/6] gpio: dwapb: Use optional-clocks interface for APB ref-clock Sergey.Semin
2020-03-23 19:54     ` Sergey.Semin [this message]
2020-03-23 19:54     ` [PATCH v3 6/6] MAINTAINERS: Add Segey Semin to maintainers of DW APB GPIO driver Sergey.Semin
2020-03-23 21:39     ` [PATCH v3 0/6] gpio: dwapb: Fix reference clocks usage Andy Shevchenko
2020-04-15 21:27 ` [PATCH 0/4] " Linus Walleij
2020-04-16  5:09   ` Sergey Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200323195401.30338-6-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=allison@lohutok.net \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=fancer.lancer@gmail.com \
    --cc=hoan@os.amperecomputing.com \
    --cc=info@metux.net \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulburton@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®