From: Philippe Schenker <philippe.schenker@toradex.com>
To: andrew@lunn.ch, f.fainelli@gmail.com, hkallweit1@gmail.com,
linux@armlinux.org.uk, netdev@vger.kernel.org,
robh+dt@kernel.org, devicetree@vger.kernel.org,
shawnguo@kernel.org, mark.rutland@arm.com
Cc: o.rempel@pengutronix.de, linux-kernel@vger.kernel.org,
silvan.murer@gmail.com, s.hauer@pengutronix.de,
a.fatoum@pengutronix.de,
Philippe Schenker <philippe.schenker@toradex.com>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: apalis-imx6qdl: use rgmii-id instead of rgmii
Date: Wed, 25 Mar 2020 16:03:28 +0100 [thread overview]
Message-ID: <20200325150329.228329-2-philippe.schenker@toradex.com> (raw)
In-Reply-To: <20200325150329.228329-1-philippe.schenker@toradex.com>
Until now a PHY-fixup in mach-imx set our rgmii timing correctly. For
the PHY KSZ9131 there is no PHY-fixup in mach-imx. To support this PHY
too, use rgmii-id.
For the now used KSZ9031 nothing will change, as rgmii-id is only
implemented and supported by the KSZ9131.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 1b5bc6b5e806..347a5edc6927 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -180,7 +180,7 @@ &ecspi2 {
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy>;
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
--
2.26.0
next prev parent reply other threads:[~2020-03-25 15:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 15:03 [PATCH 1/2] net: phy: micrel.c: add rgmii interface delay possibility to ksz9131 Philippe Schenker
2020-03-25 15:03 ` Philippe Schenker [this message]
2020-03-25 15:24 ` Heiner Kallweit
2020-03-25 15:47 ` Philippe Schenker
2020-03-25 15:28 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200325150329.228329-2-philippe.schenker@toradex.com \
--to=philippe.schenker@toradex.com \
--cc=a.fatoum@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=festevam@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=silvan.murer@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®