mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Willy Tarreau <w@1wt.eu>
To: Denis Efremov <efremov@linux.com>
Cc: Jens Axboe <axboe@kernel.dk>,
	linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	Willy Tarreau <w@1wt.eu>
Subject: [PATCH 14/23] floppy: cleanup: make result() not rely on current_fdc anymore
Date: Tue, 31 Mar 2020 11:40:45 +0200	[thread overview]
Message-ID: <20200331094054.24441-15-w@1wt.eu> (raw)
In-Reply-To: <20200331094054.24441-1-w@1wt.eu>

Now the fdc is passed in argument so that the function does not
use current_fdc anymore.

It's worth noting that there's still a single reply_buffer[] which
will store the result for the current fdc. It may or may not make
sense to implement one buffer per fdc in the future.

Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/block/floppy.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 81fd06eaea7d..4aaf84217b53 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -1153,13 +1153,13 @@ static int output_byte(int fdc, char byte)
 }
 
 /* gets the response from the fdc */
-static int result(void)
+static int result(int fdc)
 {
 	int i;
 	int status = 0;
 
 	for (i = 0; i < MAX_REPLIES; i++) {
-		status = wait_til_ready(current_fdc);
+		status = wait_til_ready(fdc);
 		if (status < 0)
 			break;
 		status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
@@ -1169,16 +1169,16 @@ static int result(void)
 			return i;
 		}
 		if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY))
-			reply_buffer[i] = fdc_inb(current_fdc, FD_DATA);
+			reply_buffer[i] = fdc_inb(fdc, FD_DATA);
 		else
 			break;
 	}
 	if (initialized) {
 		DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
-		       current_fdc, status, i);
-		show_floppy(current_fdc);
+		       fdc, status, i);
+		show_floppy(fdc);
 	}
-	fdc_state[current_fdc].reset = 1;
+	fdc_state[fdc].reset = 1;
 	return -1;
 }
 
@@ -1194,7 +1194,7 @@ static int need_more_output(void)
 	if (is_ready_state(status))
 		return MORE_OUTPUT;
 
-	return result();
+	return result(current_fdc);
 }
 
 /* Set perpendicular mode as required, based on data rate, if supported.
@@ -1524,7 +1524,7 @@ static void setup_rw_floppy(void)
 	}
 
 	if (!(flags & FD_RAW_INTR)) {
-		inr = result();
+		inr = result(current_fdc);
 		cont->interrupt();
 	} else if (flags & FD_RAW_NEED_DISK)
 		fd_watchdog();
@@ -1568,7 +1568,7 @@ static void check_wp(void)
 					/* check write protection */
 		output_byte(current_fdc, FD_GETSTATUS);
 		output_byte(current_fdc, UNIT(current_drive));
-		if (result() != 1) {
+		if (result(current_fdc) != 1) {
 			fdc_state[current_fdc].reset = 1;
 			return;
 		}
@@ -1742,14 +1742,14 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 
 	do_print = !handler && print_unex && initialized;
 
-	inr = result();
+	inr = result(current_fdc);
 	if (do_print)
 		print_result("unexpected interrupt", inr);
 	if (inr == 0) {
 		int max_sensei = 4;
 		do {
 			output_byte(current_fdc, FD_SENSEI);
-			inr = result();
+			inr = result(current_fdc);
 			if (do_print)
 				print_result("sensei", inr);
 			max_sensei--;
@@ -1782,7 +1782,7 @@ static void recalibrate_floppy(void)
 static void reset_interrupt(void)
 {
 	debugt(__func__, "");
-	result();		/* get the status ready for set_fdc */
+	result(current_fdc);		/* get the status ready for set_fdc */
 	if (fdc_state[current_fdc].reset) {
 		pr_info("reset set in interrupt, calling %ps\n", cont->error);
 		cont->error();	/* a reset just after a reset. BAD! */
@@ -4305,7 +4305,7 @@ static char __init get_fdc_version(void)
 	output_byte(current_fdc, FD_DUMPREGS);	/* 82072 and better know DUMPREGS */
 	if (fdc_state[current_fdc].reset)
 		return FDC_NONE;
-	r = result();
+	r = result(current_fdc);
 	if (r <= 0x00)
 		return FDC_NONE;	/* No FDC present ??? */
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
@@ -4332,7 +4332,7 @@ static char __init get_fdc_version(void)
 	}
 
 	output_byte(current_fdc, FD_UNLOCK);
-	r = result();
+	r = result(current_fdc);
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
 		pr_info("FDC %d is a pre-1991 82077\n", current_fdc);
 		return FDC_82077_ORIG;	/* Pre-1991 82077, doesn't know
@@ -4344,7 +4344,7 @@ static char __init get_fdc_version(void)
 		return FDC_UNKNOWN;
 	}
 	output_byte(current_fdc, FD_PARTID);
-	r = result();
+	r = result(current_fdc);
 	if (r != 1) {
 		pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
 			current_fdc, r);
-- 
2.20.1


  parent reply	other threads:[~2020-03-31  9:41 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-31  9:40 [PATCH 00/23] Floppy driver cleanups Willy Tarreau
2020-03-31  9:40 ` [PATCH 01/23] floppy: split the base port from the register in I/O accesses Willy Tarreau
2020-03-31  9:40 ` [PATCH 02/23] floppy: add references to 82077's extra registers Willy Tarreau
2020-03-31  9:40 ` [PATCH 03/23] floppy: use symbolic register names in the m68k port Willy Tarreau
2020-03-31  9:40 ` [PATCH 04/23] floppy: use symbolic register names in the parisc port Willy Tarreau
2020-03-31  9:40 ` [PATCH 05/23] floppy: use symbolic register names in the powerpc port Willy Tarreau
2020-03-31  9:40 ` [PATCH 06/23] floppy: use symbolic register names in the sparc32 port Willy Tarreau
2020-03-31  9:40 ` [PATCH 07/23] floppy: use symbolic register names in the sparc64 port Willy Tarreau
2020-04-14  9:20   ` Denis Efremov
2020-03-31  9:40 ` [PATCH 08/23] floppy: use symbolic register names in the x86 port Willy Tarreau
2020-03-31  9:40 ` [PATCH 09/23] floppy: cleanup: make twaddle() not rely on current_{fdc,drive} anymore Willy Tarreau
2020-03-31  9:40 ` [PATCH 10/23] floppy: cleanup: make reset_fdc_info() not rely on current_fdc anymore Willy Tarreau
2020-03-31  9:40 ` [PATCH 11/23] floppy: cleanup: make show_floppy() " Willy Tarreau
2020-03-31  9:40 ` [PATCH 12/23] floppy: cleanup: make wait_til_ready() " Willy Tarreau
2020-03-31  9:40 ` [PATCH 13/23] floppy: cleanup: make output_byte() " Willy Tarreau
2020-03-31  9:40 ` Willy Tarreau [this message]
2020-03-31  9:40 ` [PATCH 15/23] floppy: cleanup: make need_more_output() " Willy Tarreau
2020-03-31  9:40 ` [PATCH 16/23] floppy: cleanup: make perpendicular_mode() " Willy Tarreau
2020-03-31  9:40 ` [PATCH 17/23] floppy: cleanup: make fdc_configure() " Willy Tarreau
2020-03-31  9:40 ` [PATCH 18/23] floppy: cleanup: make fdc_specify() not rely on current_{fdc,drive} anymore Willy Tarreau
2020-03-31  9:40 ` [PATCH 19/23] floppy: cleanup: make check_wp() " Willy Tarreau
2020-03-31  9:40 ` [PATCH 20/23] floppy: cleanup: make next_valid_format() not rely on current_drive anymore Willy Tarreau
2020-03-31  9:40 ` [PATCH 21/23] floppy: cleanup: make get_fdc_version() not rely on current_fdc anymore Willy Tarreau
2020-03-31  9:40 ` [PATCH 22/23] floppy: cleanup: do not iterate on current_fdc in DMA grab/release functions Willy Tarreau
2020-04-10  8:35   ` Denis Efremov
2020-04-10  8:45     ` Willy Tarreau
2020-04-10  8:48       ` Denis Efremov
2020-04-10  9:32         ` Willy Tarreau
2020-04-10  9:30   ` [PATCH 24/23] floppy: cleanup: do not iterate on current_fdc in do_floppy_init() Willy Tarreau
2020-04-10 10:19   ` [PATCH 25/23] floppy: make sure to reset all FDCs upon resume() Willy Tarreau
2020-04-10 10:19     ` [PATCH 26/23] floppy: cleanup: get rid of current_reqD in favor of current_drive Willy Tarreau
2020-04-10 10:19     ` [PATCH 27/23] floppy: cleanup: make set_fdc() always set current_drive and current_fd Willy Tarreau
2020-03-31  9:40 ` [PATCH 23/23] floppy: cleanup: add a few comments about expectations in certain functions Willy Tarreau
2020-03-31 10:10 ` [PATCH 00/23] Floppy driver cleanups Christoph Hellwig
2020-03-31 11:01   ` Willy Tarreau
2020-03-31 15:28     ` Christoph Hellwig
2020-03-31 15:49       ` Willy Tarreau
2020-04-13 22:46 ` Jens Axboe
2020-04-14  5:31   ` Willy Tarreau
2020-04-14 10:29     ` Denis Efremov
2020-04-14 16:12       ` Willy Tarreau
2020-04-21 13:15         ` Denis Efremov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200331094054.24441-15-w@1wt.eu \
    --to=w@1wt.eu \
    --cc=axboe@kernel.dk \
    --cc=efremov@linux.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®