From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<bsz@semihalf.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
<jiada_wang@mentor.com>
Subject: [PATCH v10 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status
Date: Tue, 31 Mar 2020 03:50:48 -0700 [thread overview]
Message-ID: <20200331105051.58896-53-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200331105051.58896-1-jiada_wang@mentor.com>
From: Naveen Chakka <Naveen.Chakka@in.bosch.com>
To know the current communication status of the touch controller during
runtime, sysfs interface is added
sysfs interface: /sys/class/i2c-dev/i2c-*/device/*/touch_dev_stat
Executing the above sysfs interface provides two output values
1)Status of the touch device
value 0 represents device is inactive
value 1 represents device is active
2)Error counter
value represents the number of times device in inactive since last read
New module_param "debug_state" is introduced, by set its value,
a watchdog work is scheduled to periodically check device state.
default value is false.
Signed-off-by: Naveen Chakka <Naveen.Chakka@in.bosch.com>
Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: Rename mxt_touch_device_status to touch_dev_stat_show
Replace DEVICE_ATTR to DEVICE_ATTR_RO]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 90 ++++++++++++++++++++++--
1 file changed, 83 insertions(+), 7 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 14bd64d194b0..dda10bb51cb3 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -222,6 +222,7 @@ enum t100_type {
#define MXT_CHG_DELAY 100 /* msec */
#define MXT_POWERON_DELAY 150 /* msec */
#define MXT_BOOTLOADER_WAIT 36E5 /* 1 minute */
+#define MXT_WATCHDOG_TIMEOUT 1000 /* msec */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -245,6 +246,9 @@ enum t100_type {
#define DEBUG_MSG_MAX 200
+#define MXT_DEBUG_STATE false
+static bool debug_state = MXT_DEBUG_STATE;
+
struct mxt_info {
u8 family_id;
u8 variant_id;
@@ -317,6 +321,12 @@ struct mxt_flash {
struct delayed_work work;
};
+struct mxt_statusinfo {
+ bool dev_status;
+ bool intp_triggered;
+ u32 error_count;
+};
+
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
@@ -372,6 +382,8 @@ struct mxt_data {
const char *pcfg_name;
const char *input_name;
struct mxt_flash *flash;
+ struct delayed_work watchdog_work;
+ struct mxt_statusinfo mxt_status;
/* Cached parameters from object table */
u16 T5_address;
@@ -1626,6 +1638,8 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
struct mxt_data *data = dev_id;
int ret;
+ data->mxt_status.intp_triggered = true;
+
if (data->in_bootloader) {
complete(&data->chg_completion);
@@ -1633,21 +1647,25 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
cancel_delayed_work_sync(&data->flash->work);
ret = mxt_check_bootloader(data);
- return IRQ_RETVAL(ret);
+ ret = IRQ_RETVAL(ret);
+ goto exit;
}
- if (!data->object_table)
- return IRQ_HANDLED;
+ if (!data->object_table) {
+ ret = IRQ_HANDLED;
+ goto exit;
+ }
if (data->T44_address)
ret = mxt_process_messages_t44(data);
else
ret = mxt_process_messages(data);
- if (ret <= 0)
- return IRQ_NONE;
- else
- return IRQ_HANDLED;
+ ret = (ret <= 0) ? IRQ_NONE : IRQ_HANDLED;
+
+exit:
+ data->mxt_status.intp_triggered = false;
+ return ret;
}
static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
@@ -2969,6 +2987,31 @@ static int mxt_bootloader_status(struct mxt_data *data)
return 0;
}
+static void mxt_watchdog_work(struct work_struct *work)
+{
+ struct mxt_data *data =
+ container_of(work, struct mxt_data, watchdog_work.work);
+ u16 info_buf;
+ int ret;
+
+ if (data->suspended || data->in_bootloader ||
+ data->mxt_status.intp_triggered)
+ goto sched_work;
+
+ ret = __mxt_read_reg(data->client, 0, sizeof(info_buf), &info_buf);
+
+ if (ret) {
+ data->mxt_status.error_count++;
+ data->mxt_status.dev_status = false;
+ } else {
+ data->mxt_status.dev_status = true;
+ }
+
+sched_work:
+ schedule_delayed_work(&data->watchdog_work,
+ msecs_to_jiffies(MXT_WATCHDOG_TIMEOUT));
+}
+
static int mxt_initialize(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -3956,6 +3999,22 @@ static const struct attribute_group mxt_fw_attr_group = {
.attrs = mxt_fw_attrs,
};
+static ssize_t touch_dev_stat_show(struct device *dev, struct
+ device_attribute * attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (data->mxt_status.dev_status)
+ data->mxt_status.error_count = 0;
+
+ ret = snprintf(buf, PAGE_SIZE, "%d %d\n", data->mxt_status.dev_status,
+ data->mxt_status.error_count);
+ /* clear the error counter once it is read */
+ data->mxt_status.error_count = 0;
+ return ret;
+}
+
static DEVICE_ATTR_RO(fw_version);
static DEVICE_ATTR_RO(hw_version);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
@@ -3965,6 +4024,7 @@ static DEVICE_ATTR_RW(debug_enable);
static DEVICE_ATTR_RW(debug_v2_enable);
static DEVICE_ATTR_RO(debug_notify);
static DEVICE_ATTR_RW(t25_selftest);
+static DEVICE_ATTR_RO(touch_dev_stat);
static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -3976,6 +4036,7 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_debug_v2_enable.attr,
&dev_attr_debug_notify.attr,
&dev_attr_t25_selftest.attr,
+ &dev_attr_touch_dev_stat.attr,
NULL
};
@@ -4329,6 +4390,12 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
msleep(MXT_RESET_TIME);
}
+ if (debug_state) {
+ INIT_DELAYED_WORK(&data->watchdog_work, mxt_watchdog_work);
+ schedule_delayed_work(&data->watchdog_work,
+ msecs_to_jiffies(MXT_WATCHDOG_TIMEOUT));
+ }
+
error = mxt_initialize(data);
if (error)
goto err_free_object;
@@ -4343,6 +4410,8 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return 0;
err_free_object:
+ if (debug_state)
+ cancel_delayed_work_sync(&data->watchdog_work);
mxt_free_input_device(data);
mxt_free_object_table(data);
if (data->reset_gpio) {
@@ -4367,6 +4436,9 @@ static int mxt_remove(struct i2c_client *client)
mxt_free_input_device(data);
mxt_free_object_table(data);
+ if (debug_state)
+ cancel_delayed_work_sync(&data->watchdog_work);
+
return 0;
}
@@ -4463,3 +4535,7 @@ module_i2c_driver(mxt_driver);
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
MODULE_LICENSE("GPL");
+
+module_param(debug_state, bool, 0);
+MODULE_PARM_DESC(debug_state, "Enable/Disable watchdog work to check device state (default="
+ __MODULE_STRING(MXT_DEBUG_STATE) ")");
--
2.17.1
next prev parent reply other threads:[~2020-03-31 10:54 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 10:49 [PATCH v10 00/55] atmel_mxt_ts misc Jiada Wang
2020-03-31 10:49 ` [PATCH v10 01/55] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-31 10:49 ` [PATCH v10 02/55] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-31 10:49 ` [PATCH v10 03/55] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-31 10:50 ` [PATCH v10 04/55] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-31 10:50 ` [PATCH v10 05/55] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-31 10:50 ` [PATCH v10 06/55] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-31 10:50 ` [PATCH v10 07/55] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-31 10:50 ` [PATCH v10 08/55] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-31 10:50 ` [PATCH v10 09/55] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-31 10:50 ` [PATCH v10 10/55] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-31 10:50 ` [PATCH v10 11/55] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-31 10:50 ` [PATCH v10 12/55] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-31 10:50 ` [PATCH v10 13/55] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-04-01 15:42 ` Dmitry Osipenko
2020-04-02 8:28 ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 14/55] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-31 10:50 ` [PATCH v10 15/55] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-31 10:50 ` [PATCH v10 16/55] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-31 10:50 ` [PATCH v10 17/55] Input: atmel_mxt_ts: Rename mxt_fw_version_show to fw_version_show Jiada Wang
2020-03-31 10:50 ` [PATCH v10 18/55] Input: atmel_mxt_ts: Rename mxt_hw_version_show to hw_version_show Jiada Wang
2020-04-10 21:46 ` Dmitry Osipenko
2020-04-15 13:08 ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 19/55] Input: atmel_mxt_ts: rename mxt_update_fw_store to update_fw_store Jiada Wang
2020-03-31 10:50 ` [PATCH v10 20/55] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-04-07 14:56 ` Dmitry Osipenko
2020-04-09 9:11 ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 21/55] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-31 10:50 ` [PATCH v10 22/55] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-31 10:50 ` [PATCH v10 23/55] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-31 10:50 ` [PATCH v10 24/55] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-31 10:50 ` [PATCH v10 25/55] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-31 10:50 ` [PATCH v10 26/55] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-31 10:50 ` [PATCH v10 27/55] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-31 10:50 ` [PATCH v10 28/55] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-31 10:50 ` [PATCH v10 29/55] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-31 10:50 ` [PATCH v10 30/55] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-31 10:50 ` [PATCH v10 31/55] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-04-10 22:38 ` Dmitry Osipenko
2020-04-15 14:44 ` Wang, Jiada
2020-04-18 13:59 ` Dmitry Osipenko
2020-03-31 10:50 ` [PATCH v10 32/55] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-31 10:50 ` [PATCH v10 33/55] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-31 10:50 ` [PATCH v10 34/55] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-31 10:50 ` [PATCH v10 35/55] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-31 10:50 ` [PATCH v10 36/55] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-31 10:50 ` [PATCH v10 37/55] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-31 10:50 ` [PATCH v10 38/55] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-31 10:50 ` [PATCH v10 39/55] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-31 10:50 ` [PATCH v10 40/55] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-31 10:50 ` [PATCH v10 41/55] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-31 10:50 ` [PATCH v10 42/55] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-31 10:50 ` [PATCH v10 43/55] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-04-01 14:38 ` Dmitry Osipenko
2020-04-07 9:27 ` Wang, Jiada
2020-04-07 14:47 ` Dmitry Osipenko
2020-04-09 6:25 ` Wang, Jiada
2020-04-09 15:10 ` Dmitry Osipenko
2020-04-10 6:53 ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 44/55] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 45/55] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 46/55] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 47/55] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 48/55] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-31 10:50 ` [PATCH v10 49/55] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-31 10:50 ` [PATCH v10 50/55] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-31 10:50 ` [PATCH v10 51/55] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-31 10:50 ` Jiada Wang [this message]
2020-03-31 15:08 ` [PATCH v10 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Dmitry Osipenko
2020-04-01 12:51 ` Wang, Jiada
2020-04-01 14:33 ` Dmitry Osipenko
2020-04-01 16:10 ` Dmitry Osipenko
2020-04-06 6:59 ` Wang, Jiada
2020-03-31 10:50 ` [PATCH v10 53/55] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-31 10:50 ` [PATCH v10 54/55] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-04-01 16:04 ` Dmitry Osipenko
2020-04-02 11:50 ` Wang, Jiada
2020-04-02 13:24 ` Dmitry Osipenko
2020-04-02 13:44 ` Dmitry Osipenko
2020-04-06 4:07 ` Wang, Jiada
2020-04-02 14:00 ` Dmitry Osipenko
2020-04-02 14:07 ` Dmitry Osipenko
2020-04-06 4:18 ` Wang, Jiada
2020-04-07 15:00 ` Dmitry Osipenko
2020-04-03 8:39 ` Wang, Jiada
2020-04-04 21:38 ` Dmitry Osipenko
2020-03-31 10:50 ` [PATCH v10 55/55] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200331105051.58896-53-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bsz@semihalf.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®