From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, Joe Perches <joe@perches.com>,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Subject: [PATCH 07/11] parport_pc: Convert DPRINTK to pr_debug
Date: Fri, 3 Apr 2020 14:43:21 +0100 [thread overview]
Message-ID: <20200403134325.11523-7-sudipm.mukherjee@gmail.com> (raw)
In-Reply-To: <20200403134325.11523-1-sudipm.mukherjee@gmail.com>
From: Joe Perches <joe@perches.com>
Use a more common logging style.
Miscellanea:
o One message converted from KERN_INFO to KERN_DEBUG
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
drivers/parport/parport_pc.c | 23 +++++++----------------
1 file changed, 7 insertions(+), 16 deletions(-)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index ab3b04f32815..aae03b59564f 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -87,13 +87,6 @@
#undef DEBUG
-#ifdef DEBUG
-#define DPRINTK printk
-#else
-#define DPRINTK(stuff...)
-#endif
-
-
#define NR_SUPERIOS 3
static struct superio_struct { /* For Super-IO chips autodetection */
int io;
@@ -118,8 +111,8 @@ static void frob_econtrol(struct parport *pb, unsigned char m,
if (m != 0xff)
ectr = inb(ECONTROL(pb));
- DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
- m, v, ectr, (ectr & ~m) ^ v);
+ pr_debug("frob_econtrol(%02x,%02x): %02x -> %02x\n",
+ m, v, ectr, (ectr & ~m) ^ v);
outb((ectr & ~m) ^ v, ECONTROL(pb));
}
@@ -142,7 +135,7 @@ static int change_mode(struct parport *p, int m)
unsigned char oecr;
int mode;
- DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
+ pr_debug("parport change_mode ECP-ISA to mode 0x%02x\n", m);
if (!priv->ecr) {
printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
@@ -2295,7 +2288,7 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
int irq;
int i;
- DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+ pr_debug("sio_ite_8872_probe()\n");
/* make sure which one chip */
for (i = 0; i < 5; i++) {
@@ -2360,11 +2353,9 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
pci_write_config_dword(pdev, 0x9c,
ite8872set | (ite8872_irq * 0x11111));
- DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
- DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
- ite8872_lpt);
- DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
- ite8872_lpthi);
+ pr_debug("ITE887x: The IRQ is %d\n", ite8872_irq);
+ pr_debug("ITE887x: The PARALLEL I/O port is 0x%x\n", ite8872_lpt);
+ pr_debug("ITE887x: The PARALLEL I/O porthi is 0x%x\n", ite8872_lpthi);
/* Let the user (or defaults) steer us away from interrupts */
irq = ite8872_irq;
--
2.11.0
next prev parent reply other threads:[~2020-04-03 13:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-03 13:43 [PATCH 01/11] parport: fix if-statement empty body warnings Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 02/11] parport: Convert printk(KERN_<LEVEL> to pr_<level>( Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 03/11] parport: Use more comon logging styles Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 04/11] parport: daisy: Convert DPRINTK to pr_debug Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 05/11] parport_amiga: " Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 06/11] parport_mfc3: " Sudip Mukherjee
2020-04-03 13:43 ` Sudip Mukherjee [this message]
2020-04-03 13:43 ` [PATCH 08/11] parport: Standardize use of printmode Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 09/11] parport: Add comments for parport_register_dev_model() Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 10/11] parport: remove unused parport_register_device() Sudip Mukherjee
2020-04-03 13:43 ` [PATCH 11/11] parport: remove use of devmodel Sudip Mukherjee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200403134325.11523-7-sudipm.mukherjee@gmail.com \
--to=sudipm.mukherjee@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®