From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Janosch Frank <frankja@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>,
Cornelia Huck <cohuck@redhat.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Sean Christopherson <sean.j.christopherson@intel.com>,
Peter Xu <peterx@redhat.com>, Andrew Jones <drjones@redhat.com>,
Wainer dos Santos Moschetta <wainersm@redhat.com>
Subject: [PATCH 00/10] KVM: selftests: Add KVM_SET_MEMORY_REGION tests
Date: Fri, 10 Apr 2020 16:16:57 -0700 [thread overview]
Message-ID: <20200410231707.7128-1-sean.j.christopherson@intel.com> (raw)
This is v2-ish of my series to add a "delete" testcase[1], and v5.1 of
Wainer's series to add a "max" testcase[2].
I've only tested on x86_64. I fudged compile testing on !x86_64 by
inverting the ifdefs, e.g. to squish unused var warnings, but by no means
is the code actually tested on other architectures.
I kept Andrew's review for the "max" test. Other than the 1MB->2MB
change (see below), it was basically a straight copy-paste of code.
v1->v2 of delete:
- Drop patch to expose primary memslot. [Peter]
- Add explicit synchronization to MOVE and DELETE tests. [Peter]
- Use list.h instead of open coding linked lists. [Peter]
- Clean up the code and separate the testcases into separate functions.
- Expand GUEST_ASSERT() to allow passing a value back to the host for
printing.
- Move to common KVM, with ifdefs to hide the x86_64-only stuff (which
is a lot at this point).
- Do KVM_SET_NR_MMU_PAGES in the "zero" testcase to get less obscure
behavior for KVM_RUN. [Christian]
v5.1 of max:
- Fix a whitespace issue in vm_get_fd(). [checkpatch]
- Move the code to set_memory_region_test. The only _intended_
functional change is to create 2MB regions instead of 1MB regions.
The only motivation for doing so was to reuse an existing define in
set_memory_region_test.
[1] https://lkml.kernel.org/r/20200320205546.2396-1-sean.j.christopherson@intel.com
[2] https://lkml.kernel.org/r/20200409220905.26573-1-wainersm@redhat.com
Sean Christopherson (8):
KVM: selftests: Take vcpu pointer instead of id in vm_vcpu_rm()
KVM: selftests: Use kernel's list instead of homebrewed replacement
KVM: selftests: Add util to delete memory region
KVM: selftests: Add GUEST_ASSERT variants to pass values to host
KVM: sefltests: Add explicit synchronization to move mem region test
KVM: selftests: Add "delete" testcase to set_memory_region_test
KVM: selftests: Add "zero" testcase to set_memory_region_test
KVM: selftests: Make set_memory_region_test common to all
architectures
Wainer dos Santos Moschetta (2):
selftests: kvm: Add vm_get_fd() in kvm_util
selftests: kvm: Add testcase for creating max number of memslots
tools/testing/selftests/kvm/.gitignore | 2 +-
tools/testing/selftests/kvm/Makefile | 4 +-
.../testing/selftests/kvm/include/kvm_util.h | 28 +-
tools/testing/selftests/kvm/lib/kvm_util.c | 154 +++----
.../selftests/kvm/lib/kvm_util_internal.h | 8 +-
.../selftests/kvm/lib/s390x/processor.c | 5 +-
.../selftests/kvm/set_memory_region_test.c | 403 ++++++++++++++++++
.../kvm/x86_64/set_memory_region_test.c | 141 ------
8 files changed, 520 insertions(+), 225 deletions(-)
create mode 100644 tools/testing/selftests/kvm/set_memory_region_test.c
delete mode 100644 tools/testing/selftests/kvm/x86_64/set_memory_region_test.c
--
2.26.0
next reply other threads:[~2020-04-10 23:17 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-10 23:16 Sean Christopherson [this message]
2020-04-10 23:16 ` [PATCH 01/10] KVM: selftests: Take vcpu pointer instead of id in vm_vcpu_rm() Sean Christopherson
2020-04-13 18:26 ` Wainer dos Santos Moschetta
2020-04-13 21:26 ` Sean Christopherson
2020-04-14 8:25 ` Andrew Jones
2020-04-14 13:02 ` Wainer dos Santos Moschetta
2020-04-15 15:11 ` Paolo Bonzini
2020-04-14 16:02 ` Andrew Jones
2020-04-10 23:16 ` [PATCH 02/10] KVM: selftests: Use kernel's list instead of homebrewed replacement Sean Christopherson
2020-04-14 16:03 ` Andrew Jones
2020-04-10 23:17 ` [PATCH 03/10] KVM: selftests: Add util to delete memory region Sean Christopherson
2020-04-13 18:52 ` Wainer dos Santos Moschetta
2020-04-14 16:04 ` Andrew Jones
2020-04-10 23:17 ` [PATCH 04/10] KVM: selftests: Add GUEST_ASSERT variants to pass values to host Sean Christopherson
2020-04-14 16:02 ` Andrew Jones
2020-04-10 23:17 ` [PATCH 05/10] KVM: sefltests: Add explicit synchronization to move mem region test Sean Christopherson
2020-04-10 23:17 ` [PATCH 06/10] KVM: selftests: Add "delete" testcase to set_memory_region_test Sean Christopherson
2020-04-14 16:19 ` Andrew Jones
2020-04-14 16:29 ` Andrew Jones
2020-04-10 23:17 ` [PATCH 07/10] selftests: kvm: Add vm_get_fd() in kvm_util Sean Christopherson
2020-04-10 23:17 ` [PATCH 08/10] KVM: selftests: Add "zero" testcase to set_memory_region_test Sean Christopherson
2020-04-10 23:17 ` [PATCH 09/10] KVM: selftests: Make set_memory_region_test common to all architectures Sean Christopherson
2020-04-14 14:43 ` Wainer dos Santos Moschetta
2020-04-10 23:17 ` [PATCH 10/10] selftests: kvm: Add testcase for creating max number of memslots Sean Christopherson
2020-04-13 13:22 ` Wainer dos Santos Moschetta
2020-04-15 15:40 ` [PATCH 00/10] KVM: selftests: Add KVM_SET_MEMORY_REGION tests Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200410231707.7128-1-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=drjones@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=wainersm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome