From: Paul Cercueil <paul@crapouillou.net>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>
Cc: od@zcrc.me, 周琰杰 <zhouyanjie@wanyeetech.com>,
devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Paul Cercueil" <paul@crapouillou.net>
Subject: [PATCH 09/13] MIPS: ingenic: DTS: Update JZ4770 support
Date: Mon, 13 Apr 2020 17:26:29 +0200 [thread overview]
Message-ID: <20200413152633.198301-9-paul@crapouillou.net> (raw)
In-Reply-To: <20200413152633.198301-1-paul@crapouillou.net>
Add support for the RTC, AIC, CODEC, MMC 0/1/2, ADC, GPU, LCD,
USB OTG, USB PHY controllers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
arch/mips/boot/dts/ingenic/jz4770.dtsi | 177 ++++++++++++++++++++++++-
1 file changed, 170 insertions(+), 7 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 3024c360c3ca..fa11ac950499 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -38,13 +38,25 @@ osc32k: osc32k {
};
cgu: jz4770-cgu@10000000 {
- compatible = "ingenic,jz4770-cgu";
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
clocks = <&ext>, <&osc32k>;
clock-names = "ext", "osc32k";
#clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ #phy-cells = <0>;
+ };
};
tcu: timer@10002000 {
@@ -101,6 +113,14 @@ ost: timer@e0 {
};
};
+ rtc: rtc@10003000 {
+ compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+ };
+
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4770-pinctrl";
reg = <0x10010000 0x600>;
@@ -199,6 +219,93 @@ gpf: gpio@5 {
};
};
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4770-i2s";
+ reg = <0x10020000 0x94>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
+ <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
+ clock-names = "aic", "i2s", "ext", "pll half";
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a0 {
+ compatible = "ingenic,jz4770-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc2: mmc@10023000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10023000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC2>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <35>;
+
+ dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
uart0: serial@10030000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10030000 0x100>;
@@ -251,6 +358,43 @@ uart3: serial@10033000 {
status = "disabled";
};
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4770-adc";
+ reg = <0x10070000 0x30>;
+
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ gpu: gpu@13040000 {
+ compatible = "vivante,gc";
+ reg = <0x13040000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>;
+ clock-names = "bus", "core", "shader";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4770-lcd";
+ reg = <0x13050000 0x300>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+ clock-names = "lcd_pclk";
+ };
+
dmac0: dma-controller@13420000 {
compatible = "ingenic,jz4770-dma";
reg = <0x13420000 0xC0>, <0x13420300 0x20>;
@@ -260,9 +404,6 @@ dmac0: dma-controller@13420000 {
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <24>;
-
- /* Disable dmac0 until we have something that uses it */
- status = "disabled";
};
dmac1: dma-controller@13420100 {
@@ -274,9 +415,6 @@ dmac1: dma-controller@13420100 {
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <23>;
-
- /* Disable dmac1 until we have something that uses it */
- status = "disabled";
};
uhc: uhc@13430000 {
@@ -292,4 +430,29 @@ uhc: uhc@13430000 {
status = "disabled";
};
+
+ usb_otg: usb@13440000 {
+ compatible = "ingenic,jz4770-musb";
+ reg = <0x13440000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_OTG>;
+ clock-names = "udc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+ interrupt-names = "mc";
+
+ phys = <&otg_phy>;
+
+ usb-role-switch;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ probe-type = "map_rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
};
--
2.25.1
next prev parent reply other threads:[~2020-04-13 15:28 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 15:26 [PATCH 01/13] dt-bindings: timer: Convert ingenic,tcu.txt to YAML Paul Cercueil
2020-04-13 15:26 ` [PATCH 02/13] dt-bindings: mmc: Convert jz4740-mmc doc " Paul Cercueil
2020-04-20 20:48 ` Rob Herring
2020-04-13 15:26 ` [PATCH 03/13] dt-bindings: dma: Convert jz4740-dma " Paul Cercueil
2020-04-20 20:49 ` Rob Herring
2020-04-13 15:26 ` [PATCH 04/13] dt-bindings: usb: ingenic,musb: Add usb-role-switch property Paul Cercueil
2020-04-20 20:49 ` Rob Herring
2020-04-13 15:26 ` [PATCH 05/13] dt-bindings: MIPS: Require SoC compatible string after board string Paul Cercueil
2020-04-20 20:50 ` Rob Herring
2020-04-13 15:26 ` [PATCH 06/13] MIPS: ingenic: DTS: Fix invalid value in #dma-cells Paul Cercueil
2020-04-13 15:26 ` [PATCH 07/13] MIPS: ingenic: DTS: Respect cell count of common properties Paul Cercueil
2020-04-29 21:04 ` Thomas Bogendoerfer
2020-04-30 12:17 ` Paul Cercueil
2020-04-13 15:26 ` [PATCH 08/13] MIPS: ingenic: DTS: Add nodes for the watchdog/PWM/OST Paul Cercueil
2020-04-29 21:04 ` Thomas Bogendoerfer
2020-04-13 15:26 ` Paul Cercueil [this message]
2020-04-29 21:05 ` [PATCH 09/13] MIPS: ingenic: DTS: Update JZ4770 support Thomas Bogendoerfer
2020-04-13 15:26 ` [PATCH 10/13] MIPS: ingenic: DTS: Update GCW0 support Paul Cercueil
2020-04-29 21:05 ` Thomas Bogendoerfer
2020-04-13 15:26 ` [PATCH 11/13] MIPS: ingenic: CI20: enable OST, PWM drivers in defconfig Paul Cercueil
2020-04-29 21:05 ` Thomas Bogendoerfer
2020-04-13 15:26 ` [PATCH 12/13] MIPS: ingenic: GCW0: Update defconfig Paul Cercueil
2020-04-29 21:06 ` Thomas Bogendoerfer
2020-04-13 15:26 ` [PATCH 13/13] MIPS: ingenic: Drop obsolete code, merge the rest in setup.c Paul Cercueil
2020-04-29 21:06 ` Thomas Bogendoerfer
2020-04-20 20:47 ` [PATCH 01/13] dt-bindings: timer: Convert ingenic,tcu.txt to YAML Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200413152633.198301-9-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=od@zcrc.me \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=zhouyanjie@wanyeetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®