From: Philipp Puschmann <p.puschmann@pironex.de>
To: cernekee@chromium.org, lgirdwood@gmail.com, broonie@kernel.org,
tglx@linutronix.de, nhuck@google.com,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Cc: Philipp Puschmann <p.puschmann@pironex.de>
Subject: [PATCH] ASoC: tas571x: disable regulators on failed probe
Date: Tue, 14 Apr 2020 13:27:54 +0200 [thread overview]
Message-ID: <20200414112754.3365406-1-p.puschmann@pironex.de> (raw)
If probe fails after enabling the regulators regulator_put is called for
each supply without having them disabled before. This produces some
warnings like
WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c
[<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14)
[<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4)
[<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4)
[<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c)
[<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38)
[<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38)
[<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c)
[<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c)
[<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c)
[<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60)
[<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc)
[<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0)
[<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0)
[<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108)
[<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88)
[<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250)
[<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244)
[<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540)
[<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8)
[<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)
Fixes: 3fd6e7d9a146 (ASoC: tas571x: New driver for TI TAS571x power amplifiers)
Signed-off-by: Philipp Puschmann <p.puschmann@pironex.de>
---
sound/soc/codecs/tas571x.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c
index 1554631cb397..5b7f9fcf6cbf 100644
--- a/sound/soc/codecs/tas571x.c
+++ b/sound/soc/codecs/tas571x.c
@@ -820,8 +820,10 @@ static int tas571x_i2c_probe(struct i2c_client *client,
priv->regmap = devm_regmap_init(dev, NULL, client,
priv->chip->regmap_config);
- if (IS_ERR(priv->regmap))
- return PTR_ERR(priv->regmap);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ goto disable_regs;
+ }
priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW);
if (IS_ERR(priv->pdn_gpio)) {
@@ -845,7 +847,7 @@ static int tas571x_i2c_probe(struct i2c_client *client,
ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0);
if (ret)
- return ret;
+ goto disable_regs;
usleep_range(50000, 60000);
@@ -861,12 +863,20 @@ static int tas571x_i2c_probe(struct i2c_client *client,
*/
ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0);
if (ret)
- return ret;
+ goto disable_regs;
}
- return devm_snd_soc_register_component(&client->dev,
+ ret = devm_snd_soc_register_component(&client->dev,
&priv->component_driver,
&tas571x_dai, 1);
+ if (ret)
+ goto disable_regs;
+
+ return ret;
+
+disable_regs:
+ regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies);
+ return ret;
}
static int tas571x_i2c_remove(struct i2c_client *client)
--
2.26.0
next reply other threads:[~2020-04-14 11:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-14 11:27 Philipp Puschmann [this message]
2020-04-14 11:36 ` Mark Brown
2020-04-14 12:25 ` Philipp Puschmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200414112754.3365406-1-p.puschmann@pironex.de \
--to=p.puschmann@pironex.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cernekee@chromium.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nhuck@google.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®