From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: linux-kernel@vger.kernel.org, tiwai@suse.de, broonie@kernel.org,
gregkh@linuxfoundation.org, jank@cadence.com,
srinivas.kandagatla@linaro.org, rander.wang@linux.intel.com,
ranjani.sridharan@linux.intel.com, hui.wang@canonical.com,
pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com,
slawomir.blauciak@intel.com, mengdong.lin@intel.com
Subject: [RFC 4/5] soundwire: qcom: add sdw_master_device support
Date: Fri, 17 Apr 2020 04:55:23 +0800 [thread overview]
Message-ID: <20200416205524.2043-5-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20200416205524.2043-1-yung-chuan.liao@linux.intel.com>
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Add new device as a child of the platform device, following the
following hierarchy:
platform_device
sdw_master_device
sdw_slave0
...
sdw_slaveN
For the Qualcomm implementation no sdw_link_ops are provided. All the
dais have to be registered using the platform_device and all power
management is handled at the platform device level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/qcom.c | 39 ++++++++++++++++++++++++++++++++++-----
1 file changed, 34 insertions(+), 5 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index e08a17c13f92..96306044aa84 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -89,6 +89,7 @@ struct qcom_swrm_port_config {
struct qcom_swrm_ctrl {
struct sdw_bus bus;
struct device *dev;
+ struct sdw_master_device *md;
struct regmap *regmap;
struct completion *comp;
struct work_struct slave_work;
@@ -746,7 +747,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
struct sdw_master_prop *prop;
struct sdw_bus_params *params;
struct qcom_swrm_ctrl *ctrl;
- int ret;
+ int ret, err;
u32 val;
ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
@@ -784,14 +785,34 @@ static int qcom_swrm_probe(struct platform_device *pdev)
mutex_init(&ctrl->port_lock);
INIT_WORK(&ctrl->slave_work, qcom_swrm_slave_wq);
- ctrl->bus.dev = dev;
+ /*
+ * add sdw_master_device.
+ * For the Qualcomm implementation there is no driver.
+ */
+ ctrl->md = sdw_master_device_add(dev, /* platform device is parent */
+ dev->fwnode,
+ NULL, /* no link ops */
+ 0, /* only one link supported */
+ NULL); /* no context */
+ if (IS_ERR(ctrl->md)) {
+ dev_err(dev, "Could not create sdw_master_device\n");
+ ret = PTR_ERR(ctrl->md);
+ goto err_clk;
+ }
+
+ /* add bus handle */
+ ctrl->md->bus = &ctrl->bus;
+
+ /* the bus uses the sdw_master_device, not the platform device */
+ ctrl->bus.dev = &ctrl->md->dev;
+
ctrl->bus.ops = &qcom_swrm_ops;
ctrl->bus.port_ops = &qcom_swrm_port_ops;
ctrl->bus.compute_params = &qcom_swrm_compute_params;
ret = qcom_swrm_get_port_config(ctrl);
if (ret)
- goto err_clk;
+ goto err_md;
params = &ctrl->bus.params;
params->max_dr_freq = DEFAULT_CLK_FREQ;
@@ -818,14 +839,14 @@ static int qcom_swrm_probe(struct platform_device *pdev)
"soundwire", ctrl);
if (ret) {
dev_err(dev, "Failed to request soundwire irq\n");
- goto err_clk;
+ goto err_md;
}
ret = sdw_add_bus_master(&ctrl->bus);
if (ret) {
dev_err(dev, "Failed to register Soundwire controller (%d)\n",
ret);
- goto err_clk;
+ goto err_md;
}
qcom_swrm_init(ctrl);
@@ -841,6 +862,10 @@ static int qcom_swrm_probe(struct platform_device *pdev)
err_master_add:
sdw_delete_bus_master(&ctrl->bus);
+err_md:
+ err = sdw_master_device_del(ctrl->md);
+ if (err < 0) /* log but return initial status */
+ dev_err(dev, "master device del failed %d\n", err);
err_clk:
clk_disable_unprepare(ctrl->hclk);
err_init:
@@ -850,8 +875,12 @@ static int qcom_swrm_probe(struct platform_device *pdev)
static int qcom_swrm_remove(struct platform_device *pdev)
{
struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+ int err;
sdw_delete_bus_master(&ctrl->bus);
+ err = sdw_master_device_del(ctrl->md);
+ if (err < 0)
+ dev_err(&pdev->dev, "master device del failed %d\n", err);
clk_disable_unprepare(ctrl->hclk);
return 0;
--
2.17.1
next prev parent reply other threads:[~2020-04-17 8:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-16 20:55 [RFC 0/5] soundwire: create master device and use it Bard Liao
2020-04-16 20:55 ` [RFC 1/5] soundwire: bus_type: add sdw_master_device support Bard Liao
2020-04-20 7:26 ` Vinod Koul
2020-04-23 14:24 ` Greg KH
2020-04-28 4:31 ` Vinod Koul
2020-04-28 6:37 ` Greg KH
2020-04-28 6:49 ` Vinod Koul
2020-04-28 6:55 ` Greg KH
2020-04-28 7:51 ` Vinod Koul
[not found] ` <4ecfa01e-4ef4-5368-3a70-2bd57407d2ad@linux.intel.com>
2020-04-30 4:57 ` Vinod Koul
2020-04-16 20:55 ` [RFC 2/5] soundwire: master: use device node pointer from master device Bard Liao
2020-04-16 20:55 ` [RFC 3/5] soundwire: qcom: fix error handling in probe Bard Liao
2020-04-20 7:42 ` Srinivas Kandagatla
2020-04-16 20:55 ` Bard Liao [this message]
2020-04-16 20:55 ` [RFC 5/5] soundwire: intel: transition to sdw_master_device Bard Liao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200416205524.2043-5-yung-chuan.liao@linux.intel.com \
--to=yung-chuan.liao@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hui.wang@canonical.com \
--cc=jank@cadence.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mengdong.lin@intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rander.wang@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=sanyog.r.kale@intel.com \
--cc=slawomir.blauciak@intel.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®