From: Sasha Levin <sashal@kernel.org>
To: Sasha Levin <sashal@kernel.org>
To: Michal Simek <michal.simek@xilinx.com>
To: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Cc: stable@vger.kernel.org
Subject: Re: [PATCH v2] tty: xilinx_uartps: Fix missing id assignment to the console
Date: Wed, 06 May 2020 23:42:07 +0000 [thread overview]
Message-ID: <20200506234208.9B4F22075E@mail.kernel.org> (raw)
In-Reply-To: <ed3111533ef5bd342ee5ec504812240b870f0853.1588602446.git.michal.simek@xilinx.com>
Hi
[This is an automated email]
This commit has been processed because it contains a -stable tag.
The stable tag indicates that it's relevant for the following trees: all
The bot has tested the following trees: v5.6.10, v5.4.38, v4.19.120, v4.14.178, v4.9.221, v4.4.221.
v5.6.10: Build OK!
v5.4.38: Build OK!
v4.19.120: Failed to apply! Possible dependencies:
024ca329bfb9 ("serial: uartps: Register own uart console and driver structures")
10a5315b47b0 ("serial: uartps: Fill struct uart_driver in probe()")
14090ad1805f ("serial: uartps: Move alias reading higher in probe()")
18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"")
427c8ae9bebc ("serial: uartps: Change logic how console_port is setup")
46a460f0150a ("serial: uartps: Do not use static struct uart_driver out of probe()")
8da1a3940da4 ("Revert "serial: uartps: Use the same dynamic major number for all ports"")
ab262666018d ("serial: uartps: Use the same dynamic major number for all ports")
bed25ac0e2b6 ("serial: uartps: Move Port ID to device data structure")
e4bbb5194ea3 ("serial: uartps: Move register to probe based on run time detection")
v4.14.178: Failed to apply! Possible dependencies:
024ca329bfb9 ("serial: uartps: Register own uart console and driver structures")
0413fe045dda ("serial: uartps: Use dynamic array for console port")
0a84bae7edfb ("serial: uartps: Remove static port array")
10a5315b47b0 ("serial: uartps: Fill struct uart_driver in probe()")
14090ad1805f ("serial: uartps: Move alias reading higher in probe()")
18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"")
1f2107223e5b ("serial: uartps: Move cnds_uart_get_port to probe")
427c8ae9bebc ("serial: uartps: Change logic how console_port is setup")
46a460f0150a ("serial: uartps: Do not use static struct uart_driver out of probe()")
8da1a3940da4 ("Revert "serial: uartps: Use the same dynamic major number for all ports"")
ab262666018d ("serial: uartps: Use the same dynamic major number for all ports")
e4bbb5194ea3 ("serial: uartps: Move register to probe based on run time detection")
v4.9.221: Failed to apply! Possible dependencies:
024ca329bfb9 ("serial: uartps: Register own uart console and driver structures")
0413fe045dda ("serial: uartps: Use dynamic array for console port")
0a84bae7edfb ("serial: uartps: Remove static port array")
10a5315b47b0 ("serial: uartps: Fill struct uart_driver in probe()")
14090ad1805f ("serial: uartps: Move alias reading higher in probe()")
18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"")
1f2107223e5b ("serial: uartps: Move cnds_uart_get_port to probe")
46a460f0150a ("serial: uartps: Do not use static struct uart_driver out of probe()")
4b9d33c6a306 ("serial: uartps: Fix suspend functionality")
81e33b51ed69 ("serial: xuartps: Cleanup the clock enable")
8da1a3940da4 ("Revert "serial: uartps: Use the same dynamic major number for all ports"")
ab262666018d ("serial: uartps: Use the same dynamic major number for all ports")
d62100f1aac2 ("serial: xilinx_uartps: Add pm runtime support")
d653c43aefed ("serial: xilinx_uartps: Fix the error path")
e4bbb5194ea3 ("serial: uartps: Move register to probe based on run time detection")
ecfc5771ef06 ("serial: xuartps: Enable clocks in the pm disable case also")
v4.4.221: Failed to apply! Possible dependencies:
024ca329bfb9 ("serial: uartps: Register own uart console and driver structures")
10a5315b47b0 ("serial: uartps: Fill struct uart_driver in probe()")
14090ad1805f ("serial: uartps: Move alias reading higher in probe()")
18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"")
354fb1a7d7e5 ("tty: xuartps: Cleanup: Reformat if-else")
373e882f9ecf ("tty: xuartps: Refactor IRQ handling")
3816b2f886d0 ("serial: xuartps: Adds RXBS register support for zynqmp")
46a460f0150a ("serial: uartps: Do not use static struct uart_driver out of probe()")
4b9d33c6a306 ("serial: uartps: Fix suspend functionality")
55861d11c5c8 ("tty: xuartps: Move request_irq to after setting up the HW")
5ede4a5cde27 ("tty: xuartps: Move RX path into helper function")
6e14f7c1f2c2 ("tty: xuartps: Improve startup function")
81e33b51ed69 ("serial: xuartps: Cleanup the clock enable")
8da1a3940da4 ("Revert "serial: uartps: Use the same dynamic major number for all ports"")
a19eda0f49e5 ("tty: xuartps: Acquire port lock for shutdown")
a8df6a51600a ("tty: xuartps: Remove '_OFFSET' suffix from #defines")
ab262666018d ("serial: uartps: Use the same dynamic major number for all ports")
aea8f3ddcf5d ("tty: xuartps: Clear interrupt status register in shutdown")
e3538c37ee38 ("tty: xuartps: Beautify read-modify writes")
e4bbb5194ea3 ("serial: uartps: Move register to probe based on run time detection")
ea8dd8e58576 ("tty: xuartps: Don't consider circular buffer when enabling transmitter")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
--
Thanks
Sasha
next prev parent reply other threads:[~2020-05-06 23:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-04 14:27 Michal Simek
2020-05-06 23:42 ` Sasha Levin [this message]
2020-05-30 12:06 ` Jan Kiszka
2020-06-01 10:23 ` Michal Simek
2020-06-18 7:52 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200506234208.9B4F22075E@mail.kernel.org \
--to=sashal@kernel.org \
--cc=shubhrajyoti.datta@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®