From: Michael Walle <michael@walle.cc>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Michael Walle <michael@walle.cc>
Subject: [PATCH net-next 2/4] net: phy: broadcom: add bcm_phy_modify_exp()
Date: Sun, 10 May 2020 00:37:12 +0200 [thread overview]
Message-ID: <20200509223714.30855-3-michael@walle.cc> (raw)
In-Reply-To: <20200509223714.30855-1-michael@walle.cc>
Add the convenience function to do a read-modify-write. This has the
additional benefit of saving one write to the selection register.
Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/net/phy/bcm-phy-lib.c | 32 ++++++++++++++++++++++++++++++++
drivers/net/phy/bcm-phy-lib.h | 2 ++
2 files changed, 34 insertions(+)
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index a390812714ed..41c728fbcfb2 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -67,6 +67,38 @@ int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
}
EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
+int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
+{
+ int new, ret;
+
+ ret = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = __phy_read(phydev, MII_BCM54XX_EXP_DATA);
+ if (ret < 0)
+ return ret;
+
+ new = (ret & ~mask) | set;
+ if (new == ret)
+ return 0;
+
+ return __phy_write(phydev, MII_BCM54XX_EXP_DATA, new);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_modify_exp);
+
+int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_modify_exp(phydev, reg, mask, set);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_modify_exp);
+
int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
{
/* The register must be written to both the Shadow Register Select and
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 0eb5333cda39..b35d880220b9 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -29,8 +29,10 @@
int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set);
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set);
static inline int bcm_phy_write_exp_sel(struct phy_device *phydev,
u16 reg, u16 val)
--
2.20.1
next prev parent reply other threads:[~2020-05-09 22:37 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-09 22:37 [PATCH net-next 0/4] net: phy: broadcom: cable tester support Michael Walle
2020-05-09 22:37 ` [PATCH net-next 1/4] net: phy: broadcom: add exp register access methods without buslock Michael Walle
2020-05-09 23:47 ` Florian Fainelli
2020-05-10 14:32 ` Andrew Lunn
2020-05-09 22:37 ` Michael Walle [this message]
2020-05-09 23:48 ` [PATCH net-next 2/4] net: phy: broadcom: add bcm_phy_modify_exp() Florian Fainelli
2020-05-10 14:33 ` Andrew Lunn
2020-05-09 22:37 ` [PATCH net-next 3/4] net: phy: broadcom: add cable test support Michael Walle
2020-05-10 0:09 ` Florian Fainelli
2020-05-10 2:20 ` kbuild test robot
2020-05-10 14:44 ` Andrew Lunn
2020-05-10 14:51 ` Michael Walle
2020-05-09 22:37 ` [PATCH net-next 4/4] net: phy: bcm54140: add cable diagnostics support Michael Walle
2020-05-10 0:05 ` kbuild test robot
2020-05-10 0:09 ` Florian Fainelli
2020-05-10 5:37 ` kbuild test robot
2020-05-10 14:44 ` Andrew Lunn
2020-05-10 18:21 ` [PATCH net-next 0/4] net: phy: broadcom: cable tester support Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200509223714.30855-3-michael@walle.cc \
--to=michael@walle.cc \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®