From: Oded Gabbay <oded.gabbay@gmail.com>
To: linux-kernel@vger.kernel.org, oshpigelman@habana.ai,
ttayar@habana.ai, gregkh@linuxfoundation.org
Subject: [PATCH 08/11] habanalabs: add hwmgr module for gaudi
Date: Mon, 11 May 2020 14:32:29 +0300 [thread overview]
Message-ID: <20200511113232.5771-9-oded.gabbay@gmail.com> (raw)
In-Reply-To: <20200511113232.5771-1-oded.gabbay@gmail.com>
The hwmgr module is responsible for messages sent to GAUDI F/W that are
not common to all habanalabs ASICs.
In GAUDI, we provide the user a simplified mode of controlling the ASIC
clock frequency. Instead of three different clocks, we present a single
clock property that the user can configure via sysfs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
---
.../ABI/testing/sysfs-driver-habanalabs | 17 +++
drivers/misc/habanalabs/gaudi/Makefile | 2 +-
drivers/misc/habanalabs/gaudi/gaudi.c | 6 +-
drivers/misc/habanalabs/gaudi/gaudiP.h | 5 +
drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c | 117 ++++++++++++++++++
5 files changed, 143 insertions(+), 4 deletions(-)
create mode 100644 drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index 782df74042ed..1a14bf9b22ba 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -10,6 +10,23 @@ KernelVersion: 5.1
Contact: oded.gabbay@gmail.com
Description: Version of the application running on the device's CPU
+What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
+Date: Jun 2019
+KernelVersion: not yet upstreamed
+Contact: oded.gabbay@gmail.com
+Description: Allows the user to set the maximum clock frequency, in MHz.
+ The device clock might be set to lower value than the maximum.
+ The user should read the clk_cur_freq_mhz to see the actual
+ frequency value of the device clock. This property is valid
+ only for the Gaudi ASIC family
+
+What: /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
+Date: Jun 2019
+KernelVersion: not yet upstreamed
+Contact: oded.gabbay@gmail.com
+Description: Displays the current frequency, in MHz, of the device clock.
+ This property is valid only for the Gaudi ASIC family
+
What: /sys/class/habanalabs/hl<n>/cpld_ver
Date: Jan 2019
KernelVersion: 5.1
diff --git a/drivers/misc/habanalabs/gaudi/Makefile b/drivers/misc/habanalabs/gaudi/Makefile
index b30b523881a0..a7b5be449de3 100644
--- a/drivers/misc/habanalabs/gaudi/Makefile
+++ b/drivers/misc/habanalabs/gaudi/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
subdir-ccflags-y += -I$(src)
-HL_GAUDI_FILES := gaudi/gaudi.o
\ No newline at end of file
+HL_GAUDI_FILES := gaudi/gaudi.o gaudi/gaudi_hwmgr.o
\ No newline at end of file
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 4da01a12bdde..624c1f907e79 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -7374,9 +7374,9 @@ static const struct hl_asic_funcs gaudi_funcs = {
.debugfs_write32 = gaudi_debugfs_write32,
.debugfs_read64 = gaudi_debugfs_read64,
.debugfs_write64 = gaudi_debugfs_write64,
- .add_device_attr = NULL,
+ .add_device_attr = gaudi_add_device_attr,
.handle_eqe = gaudi_handle_eqe,
- .set_pll_profile = NULL,
+ .set_pll_profile = gaudi_set_pll_profile,
.get_events_stat = gaudi_get_events_stat,
.read_pte = gaudi_read_pte,
.write_pte = gaudi_write_pte,
@@ -7400,7 +7400,7 @@ static const struct hl_asic_funcs gaudi_funcs = {
.rreg = hl_rreg,
.wreg = hl_wreg,
.halt_coresight = NULL,
- .get_clk_rate = NULL,
+ .get_clk_rate = gaudi_get_clk_rate,
.get_queue_id_for_cq = gaudi_get_queue_id_for_cq,
.read_device_fw_version = gaudi_read_device_fw_version,
.load_firmware_to_device = gaudi_load_firmware_to_device,
diff --git a/drivers/misc/habanalabs/gaudi/gaudiP.h b/drivers/misc/habanalabs/gaudi/gaudiP.h
index 4fe66b8e1968..f48f4647fbed 100644
--- a/drivers/misc/habanalabs/gaudi/gaudiP.h
+++ b/drivers/misc/habanalabs/gaudi/gaudiP.h
@@ -248,4 +248,9 @@ struct gaudi_device {
u8 ext_queue_idx;
};
+void gaudi_add_device_attr(struct hl_device *hdev,
+ struct attribute_group *dev_attr_grp);
+void gaudi_set_pll_profile(struct hl_device *hdev, enum hl_pll_frequency freq);
+int gaudi_get_clk_rate(struct hl_device *hdev, u32 *cur_clk, u32 *max_clk);
+
#endif /* GAUDIP_H_ */
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c b/drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c
new file mode 100644
index 000000000000..9fa7a50e5bac
--- /dev/null
+++ b/drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Copyright 2016-2018 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ */
+
+#include "gaudiP.h"
+#include "include/gaudi/gaudi_fw_if.h"
+
+void gaudi_set_pll_profile(struct hl_device *hdev, enum hl_pll_frequency freq)
+{
+ struct gaudi_device *gaudi = hdev->asic_specific;
+
+ if (freq == PLL_LAST)
+ hl_set_frequency(hdev, MME_PLL, gaudi->max_freq_value);
+}
+
+int gaudi_get_clk_rate(struct hl_device *hdev, u32 *cur_clk, u32 *max_clk)
+{
+ long value;
+
+ if (hl_device_disabled_or_in_reset(hdev))
+ return -ENODEV;
+
+ value = hl_get_frequency(hdev, MME_PLL, false);
+
+ if (value < 0) {
+ dev_err(hdev->dev, "Failed to retrieve device max clock %ld\n",
+ value);
+ return value;
+ }
+
+ *max_clk = (value / 1000 / 1000);
+
+ value = hl_get_frequency(hdev, MME_PLL, true);
+
+ if (value < 0) {
+ dev_err(hdev->dev,
+ "Failed to retrieve device current clock %ld\n",
+ value);
+ return value;
+ }
+
+ *cur_clk = (value / 1000 / 1000);
+
+ return 0;
+}
+
+static ssize_t clk_max_freq_mhz_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+ struct gaudi_device *gaudi = hdev->asic_specific;
+ long value;
+
+ if (hl_device_disabled_or_in_reset(hdev))
+ return -ENODEV;
+
+ value = hl_get_frequency(hdev, MME_PLL, false);
+
+ gaudi->max_freq_value = value;
+
+ return sprintf(buf, "%lu\n", (value / 1000 / 1000));
+}
+
+static ssize_t clk_max_freq_mhz_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+ struct gaudi_device *gaudi = hdev->asic_specific;
+ int rc;
+ u64 value;
+
+ if (hl_device_disabled_or_in_reset(hdev)) {
+ count = -ENODEV;
+ goto fail;
+ }
+
+ rc = kstrtoull(buf, 0, &value);
+
+ gaudi->max_freq_value = value * 1000 * 1000;
+
+ hl_set_frequency(hdev, MME_PLL, gaudi->max_freq_value);
+
+fail:
+ return count;
+}
+
+static ssize_t clk_cur_freq_mhz_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+ long value;
+
+ if (hl_device_disabled_or_in_reset(hdev))
+ return -ENODEV;
+
+ value = hl_get_frequency(hdev, MME_PLL, true);
+
+ return sprintf(buf, "%lu\n", (value / 1000 / 1000));
+}
+
+static DEVICE_ATTR_RW(clk_max_freq_mhz);
+static DEVICE_ATTR_RO(clk_cur_freq_mhz);
+
+static struct attribute *gaudi_dev_attrs[] = {
+ &dev_attr_clk_max_freq_mhz.attr,
+ &dev_attr_clk_cur_freq_mhz.attr,
+ NULL,
+};
+
+void gaudi_add_device_attr(struct hl_device *hdev,
+ struct attribute_group *dev_attr_grp)
+{
+ dev_attr_grp->attrs = gaudi_dev_attrs;
+}
--
2.17.1
next prev parent reply other threads:[~2020-05-11 11:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 11:32 [PATCH 00/11] Adding GAUDI ASIC support to habanalabs driver Oded Gabbay
2020-05-11 11:32 ` [PATCH 01/11] habanalabs: add dedicated define for hard reset Oded Gabbay
2020-05-11 11:32 ` [PATCH 02/11] habanalabs: set PM profile to auto only for goya Oded Gabbay
2020-05-11 11:32 ` [PATCH 03/11] habanalabs: support clock gating enable/disable Oded Gabbay
2020-05-11 11:32 ` [PATCH 04/11] habanalabs: get card type, location from F/W Oded Gabbay
2020-05-11 11:32 ` [PATCH 06/11] uapi: habanalabs: add gaudi defines Oded Gabbay
2020-05-11 11:32 ` [PATCH 07/11] habanalabs: add gaudi asic-dependent code Oded Gabbay
2020-05-11 11:32 ` Oded Gabbay [this message]
2020-05-11 11:32 ` [PATCH 09/11] habanalabs: add gaudi security module Oded Gabbay
2020-05-11 11:32 ` [PATCH 10/11] habanalabs: add gaudi profiler module Oded Gabbay
2020-05-11 11:32 ` [PATCH 11/11] habanalabs: enable gaudi code in driver Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200511113232.5771-9-oded.gabbay@gmail.com \
--to=oded.gabbay@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oshpigelman@habana.ai \
--cc=ttayar@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®