mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Niklas <niklas.soderlund@ragnatech.se>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Prabhakar <prabhakar.csengg@gmail.com>
Subject: Re: [PATCH v4 2/3] media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
Date: Wed, 13 May 2020 00:28:40 +0200	[thread overview]
Message-ID: <20200512222840.GE2542285@oden.dyn.berto.se> (raw)
In-Reply-To: <1586945948-11026-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi Lad,

Thanks for your work.

On 2020-04-15 11:19:07 +0100, Lad Prabhakar wrote:
> Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format in rcar-vin by setting
> format type to RAW8 in VNMC register and appropriately setting the bpp
> and bytesperline to enable V4L2_PIX_FMT_SRGGB8.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c  | 15 ++++++++++++++-
>  drivers/media/platform/rcar-vin/rcar-v4l2.c |  4 ++++
>  2 files changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index 48bd9bfc3948..3e8e29573e6d 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -85,6 +85,7 @@
>  #define VNMC_INF_YUV8_BT601	(1 << 16)
>  #define VNMC_INF_YUV10_BT656	(2 << 16)
>  #define VNMC_INF_YUV10_BT601	(3 << 16)
> +#define VNMC_INF_RAW8		(4 << 16)
>  #define VNMC_INF_YUV16		(5 << 16)
>  #define VNMC_INF_RGB888		(6 << 16)
>  #define VNMC_VUP		(1 << 10)
> @@ -587,13 +588,19 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
>  	rvin_write(vin, vin->crop.top, VNSLPRC_REG);
>  	rvin_write(vin, vin->crop.top + vin->crop.height - 1, VNELPRC_REG);
>  
> -
>  	/* TODO: Add support for the UDS scaler. */
>  	if (vin->info->model != RCAR_GEN3)
>  		rvin_crop_scale_comp_gen2(vin);
>  
>  	fmt = rvin_format_from_pixel(vin, vin->format.pixelformat);
>  	stride = vin->format.bytesperline / fmt->bpp;
> +
> +	/* For RAW8 format bpp is 1, but the hardware process RAW8
> +	 * format in 2 pixel unit hence configure VNIS_REG as stride / 2.
> +	 */
> +	if (vin->format.pixelformat == V4L2_PIX_FMT_SRGGB8)
> +		stride /= 2;
> +
>  	rvin_write(vin, stride, VNIS_REG);
>  }
>  
> @@ -676,6 +683,9 @@ static int rvin_setup(struct rvin_dev *vin)
>  
>  		input_is_yuv = true;
>  		break;
> +	case MEDIA_BUS_FMT_SRGGB8_1X8:
> +		vnmc |= VNMC_INF_RAW8;
> +		break;
>  	default:
>  		break;
>  	}
> @@ -737,6 +747,9 @@ static int rvin_setup(struct rvin_dev *vin)
>  	case V4L2_PIX_FMT_ABGR32:
>  		dmr = VNDMR_A8BIT(vin->alpha) | VNDMR_EXRGB | VNDMR_DTMD_ARGB;
>  		break;
> +	case V4L2_PIX_FMT_SRGGB8:
> +		dmr = 0;
> +		break;
>  	default:
>  		vin_err(vin, "Invalid pixelformat (0x%x)\n",
>  			vin->format.pixelformat);
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index 5151a3cd8a6e..ca542219e8ae 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -66,6 +66,10 @@ static const struct rvin_video_format rvin_formats[] = {
>  		.fourcc			= V4L2_PIX_FMT_ABGR32,
>  		.bpp			= 4,
>  	},
> +	{
> +		.fourcc			= V4L2_PIX_FMT_SRGGB8,
> +		.bpp			= 1,
> +	},
>  };
>  
>  const struct rvin_video_format *rvin_format_from_pixel(struct rvin_dev *vin,
> -- 
> 2.20.1
> 

-- 
Regards,
Niklas Söderlund

  reply	other threads:[~2020-05-12 22:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-15 10:19 [PATCH v4 0/3] media: rcar-vin: Enable " Lad Prabhakar
2020-04-15 10:19 ` [PATCH v4 1/3] media: rcar-vin: Invalidate pipeline if conversion is not possible on input formats Lad Prabhakar
2020-05-12 22:26   ` Niklas
2020-05-13 11:16     ` Lad, Prabhakar
2020-05-19 13:12       ` Niklas
2020-04-15 10:19 ` [PATCH v4 2/3] media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format Lad Prabhakar
2020-05-12 22:28   ` Niklas [this message]
2020-04-15 10:19 ` [PATCH v4 3/3] media: rcar-csi2: " Lad Prabhakar
2020-04-29 22:08 ` [PATCH v4 0/3] media: rcar-vin: Enable " Lad, Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200512222840.GE2542285@oden.dyn.berto.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=prabhakar.csengg@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®