From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
To: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Tomasz Figa <tfiga@chromium.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>,
Sergey Senozhatsky <senozhatsky@chromium.org>
Subject: [PATCH v6 06/14] videobuf2: handle V4L2_FLAG_MEMORY_NON_CONSISTENT flag
Date: Fri, 15 May 2020 01:01:45 +0900 [thread overview]
Message-ID: <20200514160153.3646-7-sergey.senozhatsky@gmail.com> (raw)
In-Reply-To: <20200514160153.3646-1-sergey.senozhatsky@gmail.com>
From: Sergey Senozhatsky <senozhatsky@chromium.org>
This patch lets user-space to request a non-consistent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.
= CREATE_BUFS
struct v4l2_create_buffers has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= CREATE_BUFS32
struct v4l2_create_buffers32 has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= REQBUFS
We use one bit of a ->reserved[1] member of struct v4l2_requestbuffers,
which is now renamed to ->flags. Unlike v4l2_create_buffers, struct
v4l2_requestbuffers does not have enough reserved room. Therefore for
backward compatibility ->reserved and ->flags were put into anonymous
union.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
---
.../media/v4l/vidioc-create-bufs.rst | 7 +++++-
.../media/v4l/vidioc-reqbufs.rst | 11 +++++++--
.../media/common/videobuf2/videobuf2-core.c | 6 +++++
.../media/common/videobuf2/videobuf2-v4l2.c | 24 +++++++++++++++----
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 10 ++++++--
drivers/media/v4l2-core/v4l2-ioctl.c | 5 +---
include/uapi/linux/videodev2.h | 11 +++++++--
7 files changed, 59 insertions(+), 15 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
index e1afc5b504c2..f2a702870fad 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
@@ -121,7 +121,12 @@ than the number requested.
other changes, then set ``count`` to 0, ``memory`` to
``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
* - __u32
- - ``reserved``\ [7]
+ - ``flags``
+ - Specifies additional buffer management attributes.
+ See :ref:`memory-flags`.
+
+ * - __u32
+ - ``reserved``\ [6]
- A place holder for future extensions. Drivers and applications
must set the array to zero.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
index 96a59793d857..75d894d9c36c 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
@@ -112,10 +112,17 @@ aborting or finishing any DMA in progress, an implicit
``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
free any previously allocated buffers, so this is typically something
that will be done at the start of the application.
+ * - union {
+ - (anonymous)
+ * - __u32
+ - ``flags``
+ - Specifies additional buffer management attributes.
+ See :ref:`memory-flags`.
* - __u32
- ``reserved``\ [1]
- - A place holder for future extensions. Drivers and applications
- must set the array to zero.
+ - Kept for backwards compatibility. Use ``flags`` instead.
+ * - }
+ -
.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index b1332f7f1aad..6efac531006f 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -695,6 +695,9 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
unsigned int i;
int ret;
+ if (flags & V4L2_FLAG_MEMORY_NON_CONSISTENT)
+ consistent_mem = false;
+
if (q->streaming) {
dprintk(1, "streaming active\n");
return -EBUSY;
@@ -838,6 +841,9 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
bool consistent_mem = true;
int ret;
+ if (flags & V4L2_FLAG_MEMORY_NON_CONSISTENT)
+ consistent_mem = false;
+
if (q->num_buffers == VB2_MAX_FRAME) {
dprintk(1, "maximum number of buffers already allocated\n");
return -ENOBUFS;
diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c
index 26a3ec333bb7..559a229cac41 100644
--- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
+++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
@@ -718,12 +718,22 @@ static void fill_buf_caps(struct vb2_queue *q, u32 *caps)
#endif
}
+static void clear_consistency_attr(struct vb2_queue *q,
+ int memory,
+ unsigned int *flags)
+{
+ if (!q->allow_cache_hints || memory != V4L2_MEMORY_MMAP)
+ *flags &= ~V4L2_FLAG_MEMORY_NON_CONSISTENT;
+}
+
int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
{
int ret = vb2_verify_memory_type(q, req->memory, req->type);
fill_buf_caps(q, &req->capabilities);
- return ret ? ret : vb2_core_reqbufs(q, req->memory, 0, &req->count);
+ clear_consistency_attr(q, req->memory, &req->flags);
+ return ret ? ret : vb2_core_reqbufs(q, req->memory,
+ req->flags, &req->count);
}
EXPORT_SYMBOL_GPL(vb2_reqbufs);
@@ -755,6 +765,7 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
unsigned i;
fill_buf_caps(q, &create->capabilities);
+ clear_consistency_attr(q, create->memory, &create->flags);
create->index = q->num_buffers;
if (create->count == 0)
return ret != -EBUSY ? ret : 0;
@@ -797,8 +808,11 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
for (i = 0; i < requested_planes; i++)
if (requested_sizes[i] == 0)
return -EINVAL;
- return ret ? ret : vb2_core_create_bufs(q, create->memory, 0,
- &create->count, requested_planes, requested_sizes);
+ return ret ? ret : vb2_core_create_bufs(q, create->memory,
+ create->flags,
+ &create->count,
+ requested_planes,
+ requested_sizes);
}
EXPORT_SYMBOL_GPL(vb2_create_bufs);
@@ -969,11 +983,12 @@ int vb2_ioctl_reqbufs(struct file *file, void *priv,
int res = vb2_verify_memory_type(vdev->queue, p->memory, p->type);
fill_buf_caps(vdev->queue, &p->capabilities);
+ clear_consistency_attr(vdev->queue, p->memory, &p->flags);
if (res)
return res;
if (vb2_queue_is_busy(vdev, file))
return -EBUSY;
- res = vb2_core_reqbufs(vdev->queue, p->memory, 0, &p->count);
+ res = vb2_core_reqbufs(vdev->queue, p->memory, p->flags, &p->count);
/* If count == 0, then the owner has released all buffers and he
is no longer owner of the queue. Otherwise we have a new owner. */
if (res == 0)
@@ -991,6 +1006,7 @@ int vb2_ioctl_create_bufs(struct file *file, void *priv,
p->index = vdev->queue->num_buffers;
fill_buf_caps(vdev->queue, &p->capabilities);
+ clear_consistency_attr(vdev->queue, p->memory, &p->flags);
/*
* If count == 0, then just check if memory and type are valid.
* Any -EBUSY result from vb2_verify_memory_type can be mapped to 0.
diff --git a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
index a99e82ec9ab6..593bcf6c3735 100644
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -246,6 +246,9 @@ struct v4l2_format32 {
* @memory: buffer memory type
* @format: frame format, for which buffers are requested
* @capabilities: capabilities of this buffer type.
+ * @flags: additional buffer management attributes (ignored unless the
+ * queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability and
+ * configured for MMAP streaming I/O).
* @reserved: future extensions
*/
struct v4l2_create_buffers32 {
@@ -254,7 +257,8 @@ struct v4l2_create_buffers32 {
__u32 memory; /* enum v4l2_memory */
struct v4l2_format32 format;
__u32 capabilities;
- __u32 reserved[7];
+ __u32 flags;
+ __u32 reserved[6];
};
static int __bufsize_v4l2_format(struct v4l2_format32 __user *p32, u32 *size)
@@ -355,7 +359,8 @@ static int get_v4l2_create32(struct v4l2_create_buffers __user *p64,
{
if (!access_ok(p32, sizeof(*p32)) ||
copy_in_user(p64, p32,
- offsetof(struct v4l2_create_buffers32, format)))
+ offsetof(struct v4l2_create_buffers32, format)) ||
+ assign_in_user(&p64->flags, &p32->flags))
return -EFAULT;
return __get_v4l2_format32(&p64->format, &p32->format,
aux_buf, aux_space);
@@ -417,6 +422,7 @@ static int put_v4l2_create32(struct v4l2_create_buffers __user *p64,
copy_in_user(p32, p64,
offsetof(struct v4l2_create_buffers32, format)) ||
assign_in_user(&p32->capabilities, &p64->capabilities) ||
+ assign_in_user(&p32->flags, &p64->flags) ||
copy_in_user(p32->reserved, p64->reserved, sizeof(p64->reserved)))
return -EFAULT;
return __put_v4l2_format32(&p64->format, &p32->format);
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 2322f08a98be..02bfef0da76d 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2038,9 +2038,6 @@ static int v4l_reqbufs(const struct v4l2_ioctl_ops *ops,
if (ret)
return ret;
-
- CLEAR_AFTER_FIELD(p, capabilities);
-
return ops->vidioc_reqbufs(file, fh, p);
}
@@ -2080,7 +2077,7 @@ static int v4l_create_bufs(const struct v4l2_ioctl_ops *ops,
if (ret)
return ret;
- CLEAR_AFTER_FIELD(create, capabilities);
+ CLEAR_AFTER_FIELD(create, flags);
v4l_sanitize_format(&create->format);
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 34ba1017b89b..fec2607a07e3 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -946,7 +946,10 @@ struct v4l2_requestbuffers {
__u32 type; /* enum v4l2_buf_type */
__u32 memory; /* enum v4l2_memory */
__u32 capabilities;
- __u32 reserved[1];
+ union {
+ __u32 flags;
+ __u32 reserved[1];
+ };
};
/* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */
@@ -2450,6 +2453,9 @@ struct v4l2_dbg_chip_info {
* @memory: enum v4l2_memory; buffer memory type
* @format: frame format, for which buffers are requested
* @capabilities: capabilities of this buffer type.
+ * @flags: additional buffer management attributes (ignored unless the
+ * queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability
+ * and configured for MMAP streaming I/O).
* @reserved: future extensions
*/
struct v4l2_create_buffers {
@@ -2458,7 +2464,8 @@ struct v4l2_create_buffers {
__u32 memory;
struct v4l2_format format;
__u32 capabilities;
- __u32 reserved[7];
+ __u32 flags;
+ __u32 reserved[6];
};
/*
--
2.26.2
next prev parent reply other threads:[~2020-05-14 16:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-14 16:01 [PATCH v6 00/14] Implement V4L2_BUF_FLAG_NO_CACHE_* flags Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 01/14] videobuf2: use explicit unsigned int in vb2_queue Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 02/14] videobuf2: add cache management members Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 03/14] videobuf2: handle V4L2 buffer cache flags Sergey Senozhatsky
2020-06-02 9:51 ` Hans Verkuil
2020-06-02 10:18 ` Sergey Senozhatsky
2020-06-02 10:27 ` Hans Verkuil
2020-06-02 12:10 ` Sergey Senozhatsky
2020-06-02 12:21 ` Hans Verkuil
2020-06-02 12:22 ` Tomasz Figa
2020-06-02 12:24 ` Hans Verkuil
2020-06-04 4:36 ` Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 04/14] videobuf2: add V4L2_FLAG_MEMORY_NON_CONSISTENT flag Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 05/14] videobuf2: add queue memory consistency parameter Sergey Senozhatsky
2020-05-14 16:01 ` Sergey Senozhatsky [this message]
2020-05-14 16:01 ` [PATCH v6 07/14] videobuf2: factor out planes prepare/finish functions Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 08/14] videobuf2: do not sync caches when we are allowed not to Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 09/14] videobuf2: check ->synced flag in prepare() and finish() Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 10/14] videobuf2: add begin/end cpu_access callbacks to dma-contig Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 11/14] videobuf2: add begin/end cpu_access callbacks to dma-sg Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 12/14] videobuf2: don't test db_attach in dma-contig prepare and finish Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 13/14] videobuf2: remove redundant if-statement Sergey Senozhatsky
2020-05-14 16:01 ` [PATCH v6 14/14] media: vivid: add cache_hints module param Sergey Senozhatsky
2020-05-18 15:18 ` [PATCH v6 00/14] Implement V4L2_BUF_FLAG_NO_CACHE_* flags Hans Verkuil
2020-05-19 8:06 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200514160153.3646-7-sergey.senozhatsky@gmail.com \
--to=sergey.senozhatsky@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=senozhatsky@chromium.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®