mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Mark Brown <broonie@kernel.org>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>,
	Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Paul Burton <paulburton@kernel.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Arnd Bergmann <arnd@arndb.de>, Rob Herring <robh+dt@kernel.org>,
	<linux-mips@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>,
	Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Clement Leger <cleger@kalray.eu>, <linux-spi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
Date: Thu, 21 May 2020 04:21:53 +0300	[thread overview]
Message-ID: <20200521012206.14472-4-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20200521012206.14472-1-Sergey.Semin@baikalelectronics.ru>

Having them declared is redundant since each struct dw_dma_chan has
the same structure embedded and the structure from the passed dma_chan
private pointer will be copied there as a result of the next calls
chain:
dma_request_channel() -> find_candidate() -> dma_chan_get() ->
device_alloc_chan_resources() = dwc_alloc_chan_resources() ->
dw_dma_filter().
So just remove the static dw_dma_chan structures and use a locally
declared data instance with dst_id/src_id set to the same values as
the static copies used to have.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org

---

Changelog v3:
- Explicitly initialize the dw_dma_slave members on stack.
---
 drivers/spi/spi-dw-mid.c | 19 ++++++++-----------
 drivers/spi/spi-dw.h     |  2 --
 2 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index cf99832ba271..8446bad0528c 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -21,9 +21,6 @@
 #define RX_BUSY		0
 #define TX_BUSY		1
 
-static struct dw_dma_slave mid_dma_tx = { .dst_id = 1 };
-static struct dw_dma_slave mid_dma_rx = { .src_id = 0 };
-
 static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
 {
 	struct dw_dma_slave *s = param;
@@ -37,9 +34,11 @@ static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
 
 static int mid_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws)
 {
+	struct dw_dma_slave slave = {
+		.src_id = 0,
+		.dst_id = 0
+	};
 	struct pci_dev *dma_dev;
-	struct dw_dma_slave *tx = dws->dma_tx;
-	struct dw_dma_slave *rx = dws->dma_rx;
 	dma_cap_mask_t mask;
 
 	/*
@@ -54,14 +53,14 @@ static int mid_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws)
 	dma_cap_set(DMA_SLAVE, mask);
 
 	/* 1. Init rx channel */
-	rx->dma_dev = &dma_dev->dev;
-	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, rx);
+	slave.dma_dev = &dma_dev->dev;
+	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, &slave);
 	if (!dws->rxchan)
 		goto err_exit;
 
 	/* 2. Init tx channel */
-	tx->dma_dev = &dma_dev->dev;
-	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, tx);
+	slave.dst_id = 1;
+	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, &slave);
 	if (!dws->txchan)
 		goto free_rxchan;
 
@@ -386,8 +385,6 @@ static const struct dw_spi_dma_ops mfld_dma_ops = {
 
 static void dw_spi_mid_setup_dma_mfld(struct dw_spi *dws)
 {
-	dws->dma_tx = &mid_dma_tx;
-	dws->dma_rx = &mid_dma_rx;
 	dws->dma_ops = &mfld_dma_ops;
 }
 
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 81364f501b7e..60e9e430ce7b 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -146,8 +146,6 @@ struct dw_spi {
 	unsigned long		dma_chan_busy;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	const struct dw_spi_dma_ops *dma_ops;
-	void			*dma_tx;
-	void			*dma_rx;
 
 	/* Bus interface info */
 	void			*priv;
-- 
2.25.1


  parent reply	other threads:[~2020-05-21  1:22 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-21  1:21 [PATCH v3 00/16] spi: dw: Add generic DW DMA controller support Serge Semin
2020-05-21  1:21 ` [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA Serge Semin
2020-05-21  3:09   ` Feng Tang
2020-05-21 11:47     ` Serge Semin
2020-05-21 14:55       ` Feng Tang
2020-05-21 15:33         ` Serge Semin
2020-05-22  7:58           ` Feng Tang
2020-05-22 11:32             ` Serge Semin
2020-05-22 12:03               ` Feng Tang
2020-05-22 12:25                 ` Serge Semin
2020-05-21 23:33   ` Serge Semin
2020-05-21  1:21 ` [PATCH v3 02/16] spi: dw: Enable interrupts in accordance with DMA xfer mode Serge Semin
2020-05-21  1:21 ` Serge Semin [this message]
2020-05-21  9:57   ` [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures Andy Shevchenko
     [not found]     ` <20200521121228.aqplh6eftylnys3p@mobilestation>
2020-05-21 12:49       ` Andy Shevchenko
2020-05-21 15:51       ` Mark Brown
2020-05-21 15:56         ` Andy Shevchenko
2020-05-21 15:58         ` Serge Semin
2020-05-21 16:02           ` Andy Shevchenko
2020-05-21 16:39             ` Mark Brown
2020-05-21 16:44               ` Andy Shevchenko
2020-05-21 17:29               ` Serge Semin
2020-05-21  1:21 ` [PATCH v3 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length Serge Semin
2020-05-21 10:23   ` Andy Shevchenko
2020-05-21  1:21 ` [PATCH v3 07/16] spi: dw: Use DMA max burst to set the request thresholds Serge Semin
2020-05-21 10:49   ` Andy Shevchenko
2020-05-21  1:22 ` [PATCH v3 11/16] spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI Serge Semin
2020-05-21  1:22 ` [PATCH v3 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core Serge Semin
2020-05-21  1:22 ` [PATCH v3 14/16] spi: dw: Add DMA support to the DW SPI MMIO driver Serge Semin
2020-05-21  1:22 ` [PATCH v3 16/16] dt-bindings: spi: Convert DW SPI binding to DT schema Serge Semin
     [not found] ` <20200521012206.14472-10-Sergey.Semin@baikalelectronics.ru>
2020-05-21 10:47   ` [PATCH v3 09/16] spi: dw: Add core suffix to the DW APB SSI core source file Andy Shevchenko
2020-05-21 17:46 ` [PATCH v3 00/16] spi: dw: Add generic DW DMA controller support Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200521012206.14472-4-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Georgy.Vlasov@baikalelectronics.ru \
    --cc=Ramil.Zaripov@baikalelectronics.ru \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=cleger@kalray.eu \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=paulburton@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    --cc=wan.ahmad.zainie.wan.mohamad@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®