[RFC PATCH v1 3/3] amd-xgbe: Convert to generic power management

[Vaibhav Gupta <vaibhavgupta40@gmail.com>]

compile-tested only

Use dev_pm_ops structure to call generic suspend() and resume() callbacks.

Drivers should avoid saving device register and/or change power states
using PCI helper functions. With generic approach, all these are handled by
PCI core.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
index 7b86240ecd5f..014cee31a1d4 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -421,9 +421,9 @@ static void xgbe_pci_remove(struct pci_dev *pdev)
 	xgbe_free_pdata(pdata);
 }
 
-#ifdef CONFIG_PM
-static int xgbe_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused xgbe_pci_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct xgbe_prv_data *pdata = pci_get_drvdata(pdev);
 	struct net_device *netdev = pdata->netdev;
 	int ret = 0;
@@ -438,8 +438,9 @@ static int xgbe_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	return ret;
 }
 
-static int xgbe_pci_resume(struct pci_dev *pdev)
+static int __maybe_unused xgbe_pci_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct xgbe_prv_data *pdata = pci_get_drvdata(pdev);
 	struct net_device *netdev = pdata->netdev;
 	int ret = 0;
@@ -460,7 +461,6 @@ static int xgbe_pci_resume(struct pci_dev *pdev)
 
 	return ret;
 }
-#endif /* CONFIG_PM */
 
 static const struct xgbe_version_data xgbe_v2a = {
 	.init_function_ptrs_phy_impl	= xgbe_init_function_ptrs_phy_v2,
@@ -502,15 +502,16 @@ static const struct pci_device_id xgbe_pci_table[] = {
 };
 MODULE_DEVICE_TABLE(pci, xgbe_pci_table);
 
+static SIMPLE_DEV_PM_OPS(xgbe_pci_pm_ops, xgbe_pci_suspend, xgbe_pci_resume);
+
 static struct pci_driver xgbe_driver = {
 	.name = XGBE_DRV_NAME,
 	.id_table = xgbe_pci_table,
 	.probe = xgbe_pci_probe,
 	.remove = xgbe_pci_remove,
-#ifdef CONFIG_PM
-	.suspend = xgbe_pci_suspend,
-	.resume = xgbe_pci_resume,
-#endif
+	.driver = {
+		.pm = &xgbe_pci_pm_ops,
+	}
 };
 
 int xgbe_pci_init(void)
-- 
2.26.2