Re: [PATCH] MIPS: DTS: Only build subdir of current platform

[Guenter Roeck <linux@roeck-us.net>]

On Thu, May 21, 2020 at 10:15:06AM +0800, Tiezhu Yang wrote:
> Add config check in Makefile to only build the subdir of current platform.
> 
> E.g. without this patch:
> 
>   AR      arch/mips/built-in.a
>   AR      arch/mips/boot/dts/brcm/built-in.a
>   AR      arch/mips/boot/dts/cavium-octeon/built-in.a
>   AR      arch/mips/boot/dts/img/built-in.a
>   AR      arch/mips/boot/dts/ingenic/built-in.a
>   AR      arch/mips/boot/dts/lantiq/built-in.a
>   DTC     arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb
>   DTB     arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.S
>   AS      arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.o
>   DTC     arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb
>   DTB     arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.S
>   AS      arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.o
>   AR      arch/mips/boot/dts/loongson/built-in.a
>   AR      arch/mips/boot/dts/mscc/built-in.a
>   AR      arch/mips/boot/dts/mti/built-in.a
>   AR      arch/mips/boot/dts/netlogic/built-in.a
>   AR      arch/mips/boot/dts/ni/built-in.a
>   AR      arch/mips/boot/dts/pic32/built-in.a
>   AR      arch/mips/boot/dts/qca/built-in.a
>   AR      arch/mips/boot/dts/ralink/built-in.a
>   AR      arch/mips/boot/dts/xilfpga/built-in.a
>   AR      arch/mips/boot/dts/built-in.a
> 
> With this patch:
> 
>   AR      arch/mips/built-in.a
>   DTC     arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb
>   DTB     arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.S
>   AS      arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.o
>   DTC     arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb
>   DTB     arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.S
>   AS      arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.o
>   AR      arch/mips/boot/dts/loongson/built-in.a
>   AR      arch/mips/boot/dts/built-in.a
> 
> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>

With this patch applied, boston.dtb is no longer built with
64r6el_defconfig, even though 64r6el_defconfig enables
CONFIG_FIT_IMAGE_FDT_BOSTON=y. This is because the img
subdirectory is now only included if CONFIG_MACH_PISTACHIO=y,
but that is not the case with 64r6el_defconfig.

Please revisit.

Guenter

> ---
>  arch/mips/boot/dts/Makefile | 28 ++++++++++++++--------------
>  1 file changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index d429a69..dce32d1 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -1,17 +1,17 @@
>  # SPDX-License-Identifier: GPL-2.0
> -subdir-y	+= brcm
> -subdir-y	+= cavium-octeon
> -subdir-y	+= img
> -subdir-y	+= ingenic
> -subdir-y	+= lantiq
> -subdir-y	+= loongson
> -subdir-y	+= mscc
> -subdir-y	+= mti
> -subdir-y	+= netlogic
> -subdir-y	+= ni
> -subdir-y	+= pic32
> -subdir-y	+= qca
> -subdir-y	+= ralink
> -subdir-y	+= xilfpga
> +subdir-$(CONFIG_BMIPS_GENERIC)		+= brcm
> +subdir-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon
> +subdir-$(CONFIG_MACH_PISTACHIO)		+= img
> +subdir-$(CONFIG_MACH_INGENIC)		+= ingenic
> +subdir-$(CONFIG_LANTIQ)			+= lantiq
> +subdir-$(CONFIG_MACH_LOONGSON64)	+= loongson
> +subdir-$(CONFIG_MSCC_OCELOT)		+= mscc
> +subdir-$(CONFIG_MIPS_MALTA)		+= mti
> +subdir-$(CONFIG_NLM_XLP_BOARD)		+= netlogic
> +subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= ni
> +subdir-$(CONFIG_MACH_PIC32)		+= pic32
> +subdir-$(CONFIG_ATH79)			+= qca
> +subdir-$(CONFIG_RALINK)			+= ralink
> +subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= xilfpga
>  
>  obj-$(CONFIG_BUILTIN_DTB)	:= $(addsuffix /, $(subdir-y))
> -- 
> 2.1.0
>