Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support

[Lukas Wunner <lukas@wunner.de>]

On Wed, Jun 03, 2020 at 08:46:55PM -0700, Florian Fainelli wrote:
> +static const struct of_device_id bcm2835_spi_match[] = {
> +	{ .compatible = "brcm,bcm2835-spi", .data = &bcm2835_spi_interrupt },
> +	{ .compatible = "brcm,bcm2711-spi", .data = &bcm2835_spi_sh_interrupt },
> +	{ .compatible = "brcm,bcm7211-spi", .data = &bcm2835_spi_sh_interrupt },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, bcm2835_spi_match);

Maybe I'm missing something but I think you either have to reverse the
order of the entries in this array or change patch [2/3] to drop
"brcm,bcm2835-spi" from the compatible string:

__of_match_node() iterates over the entries in the array above and
calls __of_device_is_compatible() for each of them, which returns
success if the entry matches any of the device's compatible string.

Because "brcm,bcm2835-spi" is checked first and that string is
present on the controllers with shared interrupt, they're all
deemed not to use shared interrupts.

If you opt so fix this by dropping "brcm,bcm2835-spi" from the
device's compatible strings, then you have to move patch [2/3]
behind patch [3/3].


>  static int bcm2835_spi_probe(struct platform_device *pdev)
>  {
> +	irqreturn_t (*bcm2835_spi_isr_func)(int, void *);

A more succinct alternative is:

	irq_handler_t bcm2835_spi_isr_func;

Otherwise this patch LGTM.

Thanks,

Lukas