[PATCH 2/2] ASoC: qcom: common: set correct directions for dailinks

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.

Fixes: c25e295cd77b (ASoC: qcom: Add support to parse common audio device nodes")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/common.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index 6c20bdd850f3..8ada4ecba847 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -4,6 +4,7 @@
 
 #include <linux/module.h>
 #include "common.h"
+#include "qdsp6/q6afe.h"
 
 int qcom_snd_parse_of(struct snd_soc_card *card)
 {
@@ -101,6 +102,15 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
 			}
 			link->no_pcm = 1;
 			link->ignore_pmdown_time = 1;
+
+			if (q6afe_is_rx_port(link->id)) {
+				link->dpcm_playback = 1;
+				link->dpcm_capture = 0;
+			} else {
+				link->dpcm_playback = 0;
+				link->dpcm_capture = 1;
+			}
+
 		} else {
 			dlc = devm_kzalloc(dev, sizeof(*dlc), GFP_KERNEL);
 			if (!dlc)
@@ -113,12 +123,12 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
 			link->codecs->dai_name = "snd-soc-dummy-dai";
 			link->codecs->name = "snd-soc-dummy";
 			link->dynamic = 1;
+			link->dpcm_playback = 1;
+			link->dpcm_capture = 1;
 		}
 
 		link->ignore_suspend = 1;
 		link->nonatomic = 1;
-		link->dpcm_playback = 1;
-		link->dpcm_capture = 1;
 		link->stream_name = link->name;
 		link++;
 
-- 
2.21.0