From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: mbrugger@suse.com, u-boot@lists.denx.de, bmeng.cn@gmail.com,
marex@denx.de, linux-kernel@vger.kernel.org
Cc: sjg@chromium.org, m.szyprowski@samsung.com,
s.nawrocki@samsung.com, mark.kettenis@xs4all.nl,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Subject: [PATCH v4 0/5] usb: xhci: Load Raspberry Pi 4 VL805's firmware
Date: Fri, 12 Jun 2020 18:46:28 +0200 [thread overview]
Message-ID: <20200612164632.25648-1-nsaenzjulienne@suse.de> (raw)
Newer revisions of the RPi4 need their xHCI chip, VL805, firmware to be
loaded explicitly. Earlier versions didn't need that as they where using
an EEPROM for that purpose. This series takes care of setting up the
relevant infrastructure and run the firmware loading routine at the
right moment.
Note that this builds on top of Sylwester Nawrocki's "USB host support
for Raspberry Pi 4 board" series.
This works hand in hand with a series of device tree changes on the
Linux device tree that are still being reviewed:
https://patchwork.kernel.org/patch/11596403/
https://patchwork.kernel.org/patch/11596409/
---
Changes since v3:
- Use reset controller
Changes since v2:
- Correct comment on patch #1
- Address Matthias' comments
Changes since v1:
- Rename function
- Use callback in xhci-pci.c
Nicolas Saenz Julienne (5):
arm: rpi: Add function to trigger VL805's firmware load
reset: Add Raspberry Pi 4 firmware reset controller
configs: Enable support for reset controllers on RPi4
dm: pci: Assign controller device node to root bridge
usb: xhci-pci: Add reset controller support
arch/arm/mach-bcm283x/include/mach/mbox.h | 13 ++++
arch/arm/mach-bcm283x/include/mach/msg.h | 7 +++
arch/arm/mach-bcm283x/msg.c | 46 ++++++++++++++
configs/rpi_4_32b_defconfig | 1 +
configs/rpi_4_defconfig | 1 +
configs/rpi_arm64_defconfig | 1 +
drivers/pci/pci-uclass.c | 15 ++++-
drivers/reset/Kconfig | 10 ++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-raspberrypi.c | 60 +++++++++++++++++++
drivers/usb/host/xhci-pci.c | 38 +++++++++++-
.../reset/raspberrypi,firmware-reset.h | 13 ++++
12 files changed, 203 insertions(+), 3 deletions(-)
create mode 100644 drivers/reset/reset-raspberrypi.c
create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h
--
2.26.2
next reply other threads:[~2020-06-12 16:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-12 16:46 Nicolas Saenz Julienne [this message]
2020-06-12 16:46 ` [PATCH v4 1/5] arm: rpi: Add function to trigger VL805's firmware load Nicolas Saenz Julienne
2020-06-12 16:46 ` [PATCH v4 2/5] reset: Add Raspberry Pi 4 firmware reset controller Nicolas Saenz Julienne
2020-06-12 16:46 ` [PATCH v4 3/5] configs: Enable support for reset controllers on RPi4 Nicolas Saenz Julienne
2020-06-12 16:46 ` [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge Nicolas Saenz Julienne
2020-06-16 13:43 ` Simon Glass
2020-06-16 14:09 ` Nicolas Saenz Julienne
2020-06-16 23:31 ` Simon Glass
2020-06-17 19:15 ` Nicolas Saenz Julienne
2020-06-26 1:12 ` Simon Glass
2020-06-12 16:46 ` [PATCH v4 5/5] usb: xhci-pci: Add reset controller support Nicolas Saenz Julienne
2020-06-12 17:08 ` Marek Vasut
2020-06-15 8:56 ` Nicolas Saenz Julienne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200612164632.25648-1-nsaenzjulienne@suse.de \
--to=nsaenzjulienne@suse.de \
--cc=bmeng.cn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=marex@denx.de \
--cc=mark.kettenis@xs4all.nl \
--cc=mbrugger@suse.com \
--cc=s.nawrocki@samsung.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®