mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chunyan Zhang <zhang.lyra@gmail.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: linux-kernel@vger.kernel.org, Orson Zhai <orsonzhai@gmail.com>,
	Baolin Wang <baolin.wang7@gmail.com>,
	Chunyan Zhang <chunyan.zhang@unisoc.com>,
	Chunyan Zhang <zhang.lyra@gmail.com>,
	Freeman Liu <freeman.liu@unisoc.com>
Subject: [PATCH V2] nvmem: sc27xx: add sc2730 efuse support
Date: Tue, 16 Jun 2020 10:05:15 +0800	[thread overview]
Message-ID: <20200616020515.13494-1-zhang.lyra@gmail.com> (raw)

From: Freeman Liu <freeman.liu@unisoc.com>

Add support to the new efuse IP which is integrated in the SC2730
which includes multiple blocks in a single chip.

Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
---
Changes from v1:
* Addressed comments from Srinivas;
* Added reviewed-by from Baolin.
---
 drivers/nvmem/sc27xx-efuse.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c
index ab5e7e0bc3d8..c825fc902d10 100644
--- a/drivers/nvmem/sc27xx-efuse.c
+++ b/drivers/nvmem/sc27xx-efuse.c
@@ -4,12 +4,14 @@
 #include <linux/hwspinlock.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/nvmem-provider.h>
 
 /* PMIC global registers definition */
 #define SC27XX_MODULE_EN		0xc08
+#define SC2730_MODULE_EN		0x1808
 #define SC27XX_EFUSE_EN			BIT(6)
 
 /* Efuse controller registers definition */
@@ -49,12 +51,29 @@
 #define SC27XX_EFUSE_POLL_TIMEOUT	3000000
 #define SC27XX_EFUSE_POLL_DELAY_US	10000
 
+/*
+ * Since different PMICs of SC27xx series can have different
+ * address , we should save address in the device data structure.
+ */
+struct sc27xx_efuse_variant_data {
+	u32 module_en;
+};
+
 struct sc27xx_efuse {
 	struct device *dev;
 	struct regmap *regmap;
 	struct hwspinlock *hwlock;
 	struct mutex mutex;
 	u32 base;
+	const struct sc27xx_efuse_variant_data *var_data;
+};
+
+static const struct sc27xx_efuse_variant_data sc2731_edata = {
+	.module_en = SC27XX_MODULE_EN,
+};
+
+static const struct sc27xx_efuse_variant_data sc2730_edata = {
+	.module_en = SC2730_MODULE_EN,
 };
 
 /*
@@ -119,7 +138,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
 		return ret;
 
 	/* Enable the efuse controller. */
-	ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
+	ret = regmap_update_bits(efuse->regmap, efuse->var_data->module_en,
 				 SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
 	if (ret)
 		goto unlock_efuse;
@@ -169,7 +188,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
 
 disable_efuse:
 	/* Disable the efuse controller after reading. */
-	regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
+	regmap_update_bits(efuse->regmap, efuse->var_data->module_en, SC27XX_EFUSE_EN, 0);
 unlock_efuse:
 	sc27xx_efuse_unlock(efuse);
 
@@ -219,6 +238,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
 
 	mutex_init(&efuse->mutex);
 	efuse->dev = &pdev->dev;
+	efuse->var_data = of_device_get_match_data(&pdev->dev);
 
 	econfig.stride = 1;
 	econfig.word_size = 1;
@@ -238,7 +258,8 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id sc27xx_efuse_of_match[] = {
-	{ .compatible = "sprd,sc2731-efuse" },
+	{ .compatible = "sprd,sc2731-efuse", .data = &sc2731_edata},
+	{ .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata},
 	{ }
 };
 
-- 
2.20.1


             reply	other threads:[~2020-06-16  2:05 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-16  2:05 Chunyan Zhang [this message]
2020-06-16  8:30 ` Srinivas Kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200616020515.13494-1-zhang.lyra@gmail.com \
    --to=zhang.lyra@gmail.com \
    --cc=baolin.wang7@gmail.com \
    --cc=chunyan.zhang@unisoc.com \
    --cc=freeman.liu@unisoc.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=orsonzhai@gmail.com \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®