From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Konrad Dybcio <konradybcio@gmail.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Kees Cook <keescook@chromium.org>,
Anton Vorontsov <anton@enomsg.org>,
Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 17/21] arm64: dts: qcom: Update msm8994 pin configuration
Date: Sat, 20 Jun 2020 16:46:33 +0200 [thread overview]
Message-ID: <20200620144639.335093-18-konradybcio@gmail.com> (raw)
In-Reply-To: <20200620144639.335093-1-konradybcio@gmail.com>
This allows us to use I2C, SPI and the second UART.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 272 +++++++++++++++++++++
1 file changed, 272 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
index 2e118d967f53..9fbdc46991da 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
@@ -27,4 +27,276 @@ pinconf {
bias-pull-down;
};
};
+
+ blsp2_uart2_default: blsp2_uart2_default {
+ pinmux {
+ function = "blsp_uart8";
+ pins = "gpio45", "gpio46";
+ };
+ pinconf {
+ pins = "gpio45", "gpio46";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp2_uart2_sleep: blsp2_uart2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio45", "gpio46";
+ };
+ pinconf {
+ pins = "gpio45", "gpio46";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ i2c1_default: i2c1_default {
+ pinmux {
+ function = "blsp_i2c1";
+ pins = "gpio2", "gpio3";
+ };
+ pinconf {
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c1_sleep: i2c1_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio2", "gpio3";
+ };
+ pinconf {
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c2_default: i2c2_default {
+ pinmux {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c2_sleep: i2c2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c4_default: i2c4_default {
+ pinmux {
+ function = "blsp_i2c4";
+ pins = "gpio19", "gpio20";
+ };
+ pinconf {
+ pins = "gpio19", "gpio20";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c4_sleep: i2c4_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio19", "gpio20";
+ };
+ pinconf {
+ pins = "gpio19", "gpio20";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+
+ i2c5_default: i2c5_default {
+ pinmux {
+ function = "blsp_i2c5";
+ pins = "gpio23", "gpio24";
+ };
+ pinconf {
+ pins = "gpio23", "gpio24";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c5_sleep: i2c5_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio23", "gpio24";
+ };
+ pinconf {
+ pins = "gpio23", "gpio24";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c6_default: i2c6_default {
+ pinmux {
+ function = "blsp_i2c6";
+ pins = "gpio28", "gpio27";
+ };
+ pinconf {
+ pins = "gpio28", "gpio27";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c6_sleep: i2c6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio28", "gpio27";
+ };
+ pinconf {
+ pins = "gpio28", "gpio27";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_spi0_default: blsp1_spi0_default {
+ pinmux {
+ function = "blsp_spi1";
+ pins = "gpio0", "gpio1", "gpio3";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio8";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1", "gpio3";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+ pinconf_cs {
+ pins = "gpio8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_spi0_sleep: blsp1_spi0_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio0", "gpio1", "gpio3";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pmx_sdc1_clk {
+ sdc1_clk_on: clk-on {
+ pinmux {
+ pins = "sdc1_clk";
+ };
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc1_clk_off: clk-off {
+ pinmux {
+ pins = "sdc1_clk";
+ };
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc1_cmd {
+ sdc1_cmd_on: cmd-on {
+ pinmux {
+ pins = "sdc1_cmd";
+ };
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+ };
+
+ sdc1_cmd_off: cmd-off {
+ pinmux {
+ pins = "sdc1_cmd";
+ };
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc1_data {
+ sdc1_data_on: data-on {
+ pinmux {
+ pins = "sdc1_data";
+ };
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+ };
+
+ sdc1_data_off: data-off {
+ pinmux {
+ pins = "sdc1_data";
+ };
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc1_rclk {
+ sdc1_rclk_on: rclk-on {
+ pinmux {
+ pins = "sdc1_rclk";
+ };
+ pinconf {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_rclk_off: rclk-off {
+ pinmux {
+ pins = "sdc1_rclk";
+ };
+ pinconf {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+ };
};
--
2.27.0
next prev parent reply other threads:[~2020-06-20 14:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-20 14:46 [PATCH 00/21] MSM8994 peripheral enablement, DTS updates Konrad Dybcio
2020-06-20 14:46 ` [PATCH 01/21] clk: qcom: smd: Add support for MSM8992/4 rpm clocks Konrad Dybcio
2020-06-23 19:11 ` Stephen Boyd
2020-06-20 14:46 ` [PATCH 02/21] arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device Konrad Dybcio
2020-06-20 14:46 ` [PATCH 03/21] arm64: dts: qcom: msm8994: Add a proper CPU map Konrad Dybcio
2020-06-20 14:46 ` [PATCH 04/21] arm64: dts: qcom: msm8994: Wrap clock nodes into clocks {} Konrad Dybcio
2020-06-20 14:46 ` [PATCH 05/21] arm64: dts: qcom: msm8994: Rename the smem node and remove its unit address Konrad Dybcio
2020-06-20 14:46 ` [PATCH 06/21] arm64: dts: qcom: msm8994: Rename clock_gcc label to gcc Konrad Dybcio
2020-06-20 14:46 ` [PATCH 07/21] arm64: dts: qcom: msm8994: Add apcs node Konrad Dybcio
2020-06-20 14:46 ` [PATCH 08/21] arm64: dts: qcom: msm8994: Add pmu node Konrad Dybcio
2020-06-20 14:46 ` [PATCH 09/21] arm64: dts: qcom: msm8994: Add PSCI node Konrad Dybcio
2020-06-20 14:46 ` [PATCH 10/21] arm64: dts: qcom: msm8994: Add support for SMD RPM Konrad Dybcio
2020-06-20 14:46 ` [PATCH 11/21] arm64: dts: qcom: msm8994: Add SDHCI1 node Konrad Dybcio
2020-06-20 14:46 ` [PATCH 12/21] arm64: dts: qcom: msm8994: Remove qcom,msm-id and qcom-pmic-id properties Konrad Dybcio
2020-06-20 14:46 ` [PATCH 13/21] arm64: dts: qcom: msm8994: Make comments C style Konrad Dybcio
2020-06-20 14:46 ` [PATCH 14/21] arm64: dts: qcom: msm8994: Add SCM node Konrad Dybcio
2020-06-20 14:46 ` [PATCH 15/21] arm64: dts: qcom: msm8994: Add BLSP2 UART2 node Konrad Dybcio
2020-06-20 14:46 ` [PATCH 16/21] arm64: dts: qcom: msm8994: Add I2C, SPI and BLSP DMA nodes Konrad Dybcio
2020-06-20 14:46 ` Konrad Dybcio [this message]
2020-06-20 14:46 ` [PATCH 18/21] regulator: qcom_smd: Fix pmi8994 label Konrad Dybcio
2020-06-21 6:05 ` Bjorn Andersson
2020-06-20 14:46 ` [PATCH 19/21] arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id Konrad Dybcio
2020-06-20 14:46 ` [PATCH 20/21] arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) Konrad Dybcio
2020-06-20 14:46 ` [PATCH 21/21] arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead Konrad Dybcio
2020-06-23 12:39 ` [PATCH 00/21] MSM8994 peripheral enablement, DTS updates Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200620144639.335093-18-konradybcio@gmail.com \
--to=konradybcio@gmail.com \
--cc=agross@kernel.org \
--cc=anton@enomsg.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=ccross@android.com \
--cc=devicetree@vger.kernel.org \
--cc=keescook@chromium.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=skrzynka@konradybcio.pl \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®