Re: [PATCH 1/2] thunderbolt: Add support for separating the flush to SPI and authenticate

[Mika Westerberg <mika.westerberg@linux.intel.com>]

On Mon, Jun 22, 2020 at 09:30:34AM -0500, Mario Limonciello wrote:
> This allows userspace to have a shorter period of time that the device
> is unusable and to call it at a more convenient time.
> 
> For example flushing the image may happen while the user is using the
> machine and authenticating/rebooting may happen while logging out.
> 
> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
> ---
>  .../ABI/testing/sysfs-bus-thunderbolt         | 11 ++++-
>  drivers/thunderbolt/switch.c                  | 43 ++++++++++++-------
>  drivers/thunderbolt/tb.h                      |  1 +
>  3 files changed, 38 insertions(+), 17 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
> index 82e80de78dd0..26b15cbc9881 100644
> --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
> +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
> @@ -178,11 +178,18 @@ KernelVersion:	4.13
>  Contact:	thunderbolt-software@lists.01.org
>  Description:	When new NVM image is written to the non-active NVM
>  		area (through non_activeX NVMem device), the
> -		authentication procedure is started by writing 1 to
> -		this file. If everything goes well, the device is
> +		authentication procedure is started by writing to
> +		this file.
> +		If everything goes well, the device is
>  		restarted with the new NVM firmware. If the image
>  		verification fails an error code is returned instead.
>  
> +		This file will accept writing values "1" or "2"
> +		- Writing "1" will flush the image to the storage
> +		area and authenticate the image in one action.
> +		- Writing "2" will only flush the image to the storage
> +		area.

Does this ("2") also do the basic validation? I think it does so
probably good to mention that here.

> +
>  		When read holds status of the last authentication
>  		operation if an error occurred during the process. This
>  		is directly the status value from the DMA configuration
> diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
> index d7d60cd9226f..4c476a58db38 100644
> --- a/drivers/thunderbolt/switch.c
> +++ b/drivers/thunderbolt/switch.c
> @@ -27,6 +27,11 @@
>  #define NVM_MIN_SIZE		SZ_32K
>  #define NVM_MAX_SIZE		SZ_512K
>  
> +enum nvm_write_ops {
> +	WRITE_AND_AUTHENTICATE = 1,
> +	WRITE_ONLY = 2,
> +};
> +
>  static DEFINE_IDA(nvm_ida);
>  
>  struct nvm_auth_status {
> @@ -164,8 +169,12 @@ static int nvm_validate_and_write(struct tb_switch *sw)
>  	}
>  
>  	if (tb_switch_is_usb4(sw))
> -		return usb4_switch_nvm_write(sw, 0, buf, image_size);
> -	return dma_port_flash_write(sw->dma_port, 0, buf, image_size);
> +		ret = usb4_switch_nvm_write(sw, 0, buf, image_size);
> +	else
> +		ret = dma_port_flash_write(sw->dma_port, 0, buf, image_size);
> +	if (!ret)
> +		sw->nvm->flushed = true;
> +	return ret;
>  }
>  
>  static int nvm_authenticate_host_dma_port(struct tb_switch *sw)
> @@ -371,6 +380,7 @@ static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
>  		}
>  	}
>  
> +	sw->nvm->flushed = false;
>  	sw->nvm->buf_data_size = offset + bytes;
>  	memcpy(sw->nvm->buf + offset, val, bytes);
>  
> @@ -1536,7 +1546,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
>  	struct device_attribute *attr, const char *buf, size_t count)
>  {
>  	struct tb_switch *sw = tb_to_switch(dev);
> -	bool val;
> +	int val;
>  	int ret;
>  
>  	pm_runtime_get_sync(&sw->dev);
> @@ -1552,25 +1562,28 @@ static ssize_t nvm_authenticate_store(struct device *dev,
>  		goto exit_unlock;
>  	}
>  
> -	ret = kstrtobool(buf, &val);
> +	ret = kstrtoint(buf, 10, &val);
>  	if (ret)
>  		goto exit_unlock;
>  
>  	/* Always clear the authentication status */
>  	nvm_clear_auth_status(sw);
>  
> -	if (val) {
> -		if (!sw->nvm->buf) {
> -			ret = -EINVAL;
> -			goto exit_unlock;
> -		}
> -
> -		ret = nvm_validate_and_write(sw);
> -		if (ret)
> -			goto exit_unlock;
> +	if (val > 0) {
> +		if (!sw->nvm->flushed) {
> +			if (!sw->nvm->buf) {
> +				ret = -EINVAL;
> +				goto exit_unlock;
> +			}
>  
> -		sw->nvm->authenticating = true;
> -		ret = nvm_authenticate(sw);
> +			ret = nvm_validate_and_write(sw);
> +			if (ret || val == WRITE_ONLY)
> +				goto exit_unlock;
> +		}
> +		if (val == WRITE_AND_AUTHENTICATE) {
> +			sw->nvm->authenticating = true;
> +			ret = nvm_authenticate(sw);
> +		}
>  	}
>  
>  exit_unlock:
> diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
> index 2eb2bcd3cca3..222ec19737fa 100644
> --- a/drivers/thunderbolt/tb.h
> +++ b/drivers/thunderbolt/tb.h
> @@ -40,6 +40,7 @@ struct tb_switch_nvm {
>  	void *buf;
>  	size_t buf_data_size;
>  	bool authenticating;
> +	bool flushed;

Please add kernel-doc about this.

>  };
>  
>  #define TB_SWITCH_KEY_SIZE		32
> -- 
> 2.25.1