[PATCH v1 2/2] romfs: address performance regression since v3.10

[Sven Van Asbroeck <thesven73@gmail.com>]

Problem
-------
romfs sequential read performance has regressed very badly since
v3.10. Currently, reading a large file inside a romfs image is
up to 12x slower compared to reading the romfs image directly.

Benchmarks:
- use a romfs image which contains a single 250M file
- calculate the md5sum of the romfs image directly (test 1)
  $ time md5sum image.romfs
- loop-mount the romfs image, and calc the md5sum of the file
  inside it (test 2)
  $ mount -o loop,ro image.romfs /mnt/romfs
  $ time md5sum /mnt/romfs/file
- drop caches in between
  $ echo 3 > /proc/sys/vm/drop_caches

imx6 (arm cortex a9) on emmc, running v5.7.2:
(test 1)  5 seconds
(test 2) 60 seconds (12x slower)

Intel i7-3630QM on Samsung SSD 850 EVO (EMT02B6Q),
    running Ubuntu with v4.15.0-106-generic:
(test 1) 1.3 seconds
(test 2) 3.3 seconds (2.5x slower)

To show that a regression has occurred since v3.10:

imx6 on emmc, running v3.10.17:
(test 1) 16 seconds
(test 2) 18 seconds

Proposed Solution
-----------------
Increase the blocksize from 1K to PAGE_SIZE. This brings the
sequential read performance close to where it was on v3.10:

imx6 on emmc, running v5.7.2:
(test 2 1K blocksize) 60 seconds
(test 2 4K blocksize) 22 seconds

Intel on Ubuntu running v4.15:
(test 2 1K blocksize) 3.3 seconds
(test 2 4K blocksize) 1.9 seconds

There is a risk that this may increase latency on random-
access workloads. But the test below suggests that this
is not a concern:

Benchmark:
- use a 630M romfs image consisting of 9600 files
- loop-mount the romfs image
  $ mount -o loop,ro image.romfs /mnt/romfs
- drop all caches
- list all files in the filesystem (test 3)
  $ time find /mnt/romfs > /dev/null

imx6 on emmc, running v5.7.2:
(test 3 1K blocksize) 9.5 seconds
(test 3 4K blocksize) 9   seconds

Intel on Ubuntu, running v4.15:
(test 3 1K blocksize) 1.4 seconds
(test 3 4K blocksize) 1.2 seconds

Practical Solution
------------------
Introduce a mount-option called 'largeblocks'. If present,
increase the blocksize for much better sequential performance.

Note that the Linux block layer can only support n-K blocks if
the underlying block device length is also aligned to n-K. This
may not always be the case. Therefore, the driver will pick the
largest blocksize which the underlying block device can support.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Janos Farkas <chexum+dev@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
To: linux-kernel@vger.kernel.org
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
---
 fs/romfs/super.c | 62 ++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 5 deletions(-)

diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index 6fecdea791f1..93565aeaa43c 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -65,7 +65,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
-#include <linux/fs_context.h>
+#include <linux/fs_parser.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/statfs.h>
@@ -460,6 +460,54 @@ static __u32 romfs_checksum(const void *data, int size)
 	return sum;
 }
 
+enum romfs_param {
+	Opt_largeblocks,
+};
+
+static const struct fs_parameter_spec romfs_fs_parameters[] = {
+	fsparam_flag("largeblocks", Opt_largeblocks),
+	{}
+};
+
+/*
+ * Parse a single mount parameter.
+ */
+static int romfs_parse_param(struct fs_context *fc, struct fs_parameter *param)
+{
+	struct fs_parse_result result;
+	int opt;
+
+	opt = fs_parse(fc, romfs_fs_parameters, param, &result);
+	if (opt < 0)
+		return opt;
+
+	switch (opt) {
+	case Opt_largeblocks:
+		fc->fs_private = (void *) 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * pick the largest blocksize which the underlying block device
+ * is a multiple of. Or fall back to legacy (ROMBSIZE).
+ */
+static int romfs_largest_blocksize(struct super_block *sb)
+{
+	loff_t device_sz = i_size_read(sb->s_bdev->bd_inode);
+	int blksz;
+
+	for (blksz = PAGE_SIZE; blksz > ROMBSIZE; blksz >>= 1)
+		if ((device_sz % blksz) == 0)
+			break;
+
+	return blksz;
+}
+
 /*
  * fill in the superblock
  */
@@ -467,17 +515,19 @@ static int romfs_fill_super(struct super_block *sb, struct fs_context *fc)
 {
 	struct romfs_super_block *rsb;
 	struct inode *root;
-	unsigned long pos, img_size;
+	unsigned long pos, img_size, dev_blocksize;
 	const char *storage;
 	size_t len;
 	int ret;
 
 #ifdef CONFIG_BLOCK
+	dev_blocksize = fc->fs_private ? romfs_largest_blocksize(sb) :
+					 ROMBSIZE;
 	if (!sb->s_mtd) {
-		sb_set_blocksize(sb, ROMBSIZE);
+		sb_set_blocksize(sb, dev_blocksize);
 	} else {
-		sb->s_blocksize = ROMBSIZE;
-		sb->s_blocksize_bits = blksize_bits(ROMBSIZE);
+		sb->s_blocksize = dev_blocksize;
+		sb->s_blocksize_bits = blksize_bits(dev_blocksize);
 	}
 #endif
 
@@ -573,6 +623,7 @@ static int romfs_get_tree(struct fs_context *fc)
 static const struct fs_context_operations romfs_context_ops = {
 	.get_tree	= romfs_get_tree,
 	.reconfigure	= romfs_reconfigure,
+	.parse_param	= romfs_parse_param,
 };
 
 /*
@@ -607,6 +658,7 @@ static struct file_system_type romfs_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "romfs",
 	.init_fs_context = romfs_init_fs_context,
+	.parameters	= romfs_fs_parameters,
 	.kill_sb	= romfs_kill_sb,
 	.fs_flags	= FS_REQUIRES_DEV,
 };
-- 
2.17.1