From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Konrad Dybcio <konradybcio@gmail.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Amit Kucheria <amit.kucheria@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH 1/8] soc: qcom: rpmpd: Add SDM660 power-domains
Date: Tue, 23 Jun 2020 20:08:25 +0200 [thread overview]
Message-ID: <20200623180832.254163-2-konradybcio@gmail.com> (raw)
In-Reply-To: <20200623180832.254163-1-konradybcio@gmail.com>
Add the shared cx/mx and sensor sub-system's cx and mx
power-domains found on SDM660.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
.../devicetree/bindings/power/qcom,rpmpd.yaml | 1 +
drivers/soc/qcom/rpmpd.c | 33 +++++++++++++++++++
include/dt-bindings/power/qcom-rpmpd.h | 12 +++++++
3 files changed, 46 insertions(+)
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 8058955fb3b9..45ec2439ff51 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -20,6 +20,7 @@ properties:
- qcom,msm8996-rpmpd
- qcom,msm8998-rpmpd
- qcom,qcs404-rpmpd
+ - qcom,sdm660-rpmpd
- qcom,sc7180-rpmhpd
- qcom,sdm845-rpmhpd
- qcom,sm8150-rpmhpd
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index f2168e4259b2..d54a84dd83a8 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -220,11 +220,44 @@ static const struct rpmpd_desc qcs404_desc = {
.max_state = RPM_SMD_LEVEL_BINNING,
};
+/* sdm660 RPM Power domains */
+DEFINE_RPMPD_PAIR(sdm660, vddcx, vddcx_ao, RWCX, LEVEL, 0);
+DEFINE_RPMPD_VFL(sdm660, vddcx_vfl, RWCX, 0);
+
+DEFINE_RPMPD_PAIR(sdm660, vddmx, vddmx_ao, RWMX, LEVEL, 0);
+DEFINE_RPMPD_VFL(sdm660, vddmx_vfl, RWMX, 0);
+
+DEFINE_RPMPD_LEVEL(sdm660, vdd_ssccx, RWSC, 0);
+DEFINE_RPMPD_VFL(sdm660, vdd_ssccx_vfl, RWSC, 0);
+
+DEFINE_RPMPD_LEVEL(sdm660, vdd_sscmx, RWSM, 0);
+DEFINE_RPMPD_VFL(sdm660, vdd_sscmx_vfl, RWSM, 0);
+
+static struct rpmpd *sdm660_rpmpds[] = {
+ [SDM660_VDDCX] = &sdm660_vddcx,
+ [SDM660_VDDCX_AO] = &sdm660_vddcx_ao,
+ [SDM660_VDDCX_VFL] = &sdm660_vddcx_vfl,
+ [SDM660_VDDMX] = &sdm660_vddmx,
+ [SDM660_VDDMX_AO] = &sdm660_vddmx_ao,
+ [SDM660_VDDMX_VFL] = &sdm660_vddmx_vfl,
+ [SDM660_SSCCX] = &sdm660_vdd_ssccx,
+ [SDM660_SSCCX_VFL] = &sdm660_vdd_ssccx_vfl,
+ [SDM660_SSCMX] = &sdm660_vdd_sscmx,
+ [SDM660_SSCMX_VFL] = &sdm660_vdd_sscmx_vfl,
+};
+
+static const struct rpmpd_desc sdm660_desc = {
+ .rpmpds = sdm660_rpmpds,
+ .num_pds = ARRAY_SIZE(sdm660_rpmpds),
+ .max_state = RPM_SMD_LEVEL_TURBO,
+};
+
static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc },
{ .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc },
{ .compatible = "qcom,msm8998-rpmpd", .data = &msm8998_desc },
{ .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc },
+ { .compatible = "qcom,sdm660-rpmpd", .data = &sdm660_desc },
{ }
};
MODULE_DEVICE_TABLE(of, rpmpd_match_table);
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index dc146e44228b..c5a2ddef6b4b 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -101,6 +101,18 @@
#define QCS404_LPIMX 5
#define QCS404_LPIMX_VFL 6
+/* SDM660 Power Domains */
+#define SDM660_VDDCX 0
+#define SDM660_VDDCX_AO 1
+#define SDM660_VDDCX_VFL 2
+#define SDM660_VDDMX 3
+#define SDM660_VDDMX_AO 4
+#define SDM660_VDDMX_VFL 5
+#define SDM660_SSCCX 6
+#define SDM660_SSCCX_VFL 7
+#define SDM660_SSCMX 8
+#define SDM660_SSCMX_VFL 9
+
/* RPM SMD Power Domain performance levels */
#define RPM_SMD_LEVEL_RETENTION 16
#define RPM_SMD_LEVEL_RETENTION_PLUS 32
--
2.27.0
next prev parent reply other threads:[~2020-06-23 18:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 18:08 [PATCH 0/8] SDM630 and Ninges fixes Konrad Dybcio
2020-06-23 18:08 ` Konrad Dybcio [this message]
2020-06-23 18:08 ` [PATCH 2/8] arm64: dts: qcom: sdm630: Add RPM power domains support Konrad Dybcio
2020-06-23 18:08 ` [PATCH 3/8] arm64: dts: qcom: sdm630: Add tsens node Konrad Dybcio
2020-06-24 11:44 ` Amit Kucheria
2020-06-24 15:01 ` Konrad Dybcio
2020-06-25 5:47 ` Amit Kucheria
2020-06-23 18:08 ` [PATCH 4/8] arm64: dts: qcom: sdm630: nile: Enable BLSP1_UART2 Konrad Dybcio
2020-06-23 18:08 ` [PATCH 5/8] arm64: dts: qcom: sdm630: Fix the pinctrl node Konrad Dybcio
2020-06-23 18:08 ` [PATCH 6/8] arm64: dts: qcom: sdm630: nile: Reserve disabled GPIOs Konrad Dybcio
2020-06-23 18:08 ` [PATCH 7/8] arm64: dts: qcom: sdm630: nile: Remove Volume Down gpio-key Konrad Dybcio
2020-06-23 18:08 ` [PATCH 8/8] arm64: dts: qcom: sdm630: ganges: Change addresses to phandles Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200623180832.254163-2-konradybcio@gmail.com \
--to=konradybcio@gmail.com \
--cc=agross@kernel.org \
--cc=amit.kucheria@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=skrzynka@konradybcio.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®