From: Ondrej Jirman <megous@megous.com>
To: linux-sunxi@googlegroups.com, Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: Ondrej Jirman <megous@megous.com>,
Mark Rutland <mark.rutland@arm.com>,
Samuel Holland <samuel@sholland.org>,
Martijn Braam <martijn@brixit.nl>, Luca Weiss <luca@z3ntu.xyz>,
Bhushan Shah <bshah@kde.org>, Icenowy Zheng <icenowy@aosc.io>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] Add support for Pine64 PinePhone HW Revision 1.2
Date: Fri, 3 Jul 2020 21:48:39 +0200 [thread overview]
Message-ID: <20200703194842.111845-1-megous@megous.com> (raw)
This series adds an initial support for Pine64 PinePhone 1.2.
The differences against 1.1 and 1.0 are larger. So far this
series describes the magnetometer interrupt that is wired
correctly on 1.2 and backlight differences.
There are also a lot of changes in how modem gpios are exposed,
and in HDMI/USB bridge and USB power in this revision. Those
will be expressed later, when the base dtsi gains support for
these things.
Please take a look.
thank you and regards,
Ondrej Jirman
Ondrej Jirman (3):
dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings
arm64: dts: allwinner: Add support for PinePhone revision 1.2
arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V
.../devicetree/bindings/arm/sunxi.yaml | 5 +++
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../allwinner/sun50i-a64-pinephone-1.2.dts | 40 +++++++++++++++++++
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 4 +-
4 files changed, 48 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
--
2.27.0
next reply other threads:[~2020-07-03 19:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-03 19:48 Ondrej Jirman [this message]
2020-07-03 19:48 ` [PATCH 1/3] dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings Ondrej Jirman
2020-07-03 19:48 ` [PATCH 2/3] arm64: dts: allwinner: Add support for PinePhone revision 1.2 Ondrej Jirman
2020-07-06 5:13 ` Maxime Ripard
2020-07-03 19:48 ` [PATCH 3/3] arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V Ondrej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200703194842.111845-1-megous@megous.com \
--to=megous@megous.com \
--cc=bshah@kde.org \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=luca@z3ntu.xyz \
--cc=mark.rutland@arm.com \
--cc=martijn@brixit.nl \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®