From: Alexander Shishkin <alexander.shishkin@linux.intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Ammy Yi <ammy.yi@intel.com>,
stable@vger.kernel.org
Subject: [PATCH 4/4] intel_th: Fix a NULL dereference when hub driver is not loaded
Date: Mon, 6 Jul 2020 19:13:39 +0300 [thread overview]
Message-ID: <20200706161339.55468-5-alexander.shishkin@linux.intel.com> (raw)
In-Reply-To: <20200706161339.55468-1-alexander.shishkin@linux.intel.com>
Connecting master to an output port when GTH driver module is not loaded
triggers a NULL dereference:
> RIP: 0010:intel_th_set_output+0x35/0x70 [intel_th]
> Call Trace:
> ? sth_stm_link+0x12/0x20 [intel_th_sth]
> stm_source_link_store+0x164/0x270 [stm_core]
> dev_attr_store+0x17/0x30
> sysfs_kf_write+0x3e/0x50
> kernfs_fop_write+0xda/0x1b0
> __vfs_write+0x1b/0x40
> vfs_write+0xb9/0x1a0
> ksys_write+0x67/0xe0
> __x64_sys_write+0x1a/0x20
> do_syscall_64+0x57/0x1d0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Make sure the module in question is loaded and return an error if not.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 39f4034693b7c ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable@vger.kernel.org # v4.4
---
drivers/hwtracing/intel_th/core.c | 21 ++++++++++++++++++---
drivers/hwtracing/intel_th/sth.c | 4 +---
2 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/hwtracing/intel_th/core.c b/drivers/hwtracing/intel_th/core.c
index ca232ec565e8..c9ac3dc65113 100644
--- a/drivers/hwtracing/intel_th/core.c
+++ b/drivers/hwtracing/intel_th/core.c
@@ -1021,15 +1021,30 @@ int intel_th_set_output(struct intel_th_device *thdev,
{
struct intel_th_device *hub = to_intel_th_hub(thdev);
struct intel_th_driver *hubdrv = to_intel_th_driver(hub->dev.driver);
+ int ret;
/* In host mode, this is up to the external debugger, do nothing. */
if (hub->host_mode)
return 0;
- if (!hubdrv->set_output)
- return -ENOTSUPP;
+ /*
+ * hub is instantiated together with the source device that
+ * calls here, so guaranteed to be present.
+ */
+ hubdrv = to_intel_th_driver(hub->dev.driver);
+ if (!hubdrv || !try_module_get(hubdrv->driver.owner))
+ return -EINVAL;
+
+ if (!hubdrv->set_output) {
+ ret = -ENOTSUPP;
+ goto out;
+ }
+
+ ret = hubdrv->set_output(hub, master);
- return hubdrv->set_output(hub, master);
+out:
+ module_put(hubdrv->driver.owner);
+ return ret;
}
EXPORT_SYMBOL_GPL(intel_th_set_output);
diff --git a/drivers/hwtracing/intel_th/sth.c b/drivers/hwtracing/intel_th/sth.c
index 3a1f4e650378..a1529f571491 100644
--- a/drivers/hwtracing/intel_th/sth.c
+++ b/drivers/hwtracing/intel_th/sth.c
@@ -161,9 +161,7 @@ static int sth_stm_link(struct stm_data *stm_data, unsigned int master,
{
struct sth_device *sth = container_of(stm_data, struct sth_device, stm);
- intel_th_set_output(to_intel_th_device(sth->dev), master);
-
- return 0;
+ return intel_th_set_output(to_intel_th_device(sth->dev), master);
}
static int intel_th_sw_init(struct sth_device *sth)
--
2.27.0
next prev parent reply other threads:[~2020-07-06 16:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-06 16:13 [PATCH 0/4] intel_th: Fixes for v5.8 Alexander Shishkin
2020-07-06 16:13 ` [PATCH 1/4] intel_th: pci: Add Jasper Lake CPU support Alexander Shishkin
2020-07-06 16:13 ` [PATCH 2/4] intel_th: pci: Add Tiger Lake PCH-H support Alexander Shishkin
2020-07-06 16:13 ` [PATCH 3/4] intel_th: pci: Add Emmitsburg PCH support Alexander Shishkin
2020-07-06 16:13 ` Alexander Shishkin [this message]
2020-07-10 14:03 ` [PATCH 4/4] intel_th: Fix a NULL dereference when hub driver is not loaded Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200706161339.55468-5-alexander.shishkin@linux.intel.com \
--to=alexander.shishkin@linux.intel.com \
--cc=ammy.yi@intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®