mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse@codeaurora.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: freedreno@lists.freedesktop.org, Rob Clark <robdclark@gmail.com>,
	Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	kbuild test robot <lkp@intel.com>,
	"open list:DRM DRIVER FOR MSM ADRENO GPU" 
	<linux-arm-msm@vger.kernel.org>,
	"open list:DRM DRIVER FOR MSM ADRENO GPU" 
	<dri-devel@lists.freedesktop.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] drm/msm/a6xx: add build_bw_table for A640/A650
Date: Fri, 10 Jul 2020 11:33:18 -0600	[thread overview]
Message-ID: <20200710173318.GE21059@jcrouse1-lnx.qualcomm.com> (raw)
In-Reply-To: <20200701030958.24466-1-jonathan@marek.ca>

On Tue, Jun 30, 2020 at 11:09:57PM -0400, Jonathan Marek wrote:
> This sets up bw tables for A640/A650 similar to A618/A630, 0 DDR bandwidth
> vote, and the CNOC vote. A640 has the same CNOC addresses as A630 and was
> working, but this is required for A650 to work.
> 
> Eventually the bw table should be filled by querying the interconnect
> driver for each BW in the dts, but use these dummy tables for now.

Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>

And yes, I agree that we need to move this into the generic API sooner rather
than later, but this should be good enough to get a working GPU/GMU.

> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>  drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 74 +++++++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
> index 9921e632f1ca..ccd44d0418f8 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
> @@ -281,6 +281,76 @@ static void a618_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
>  	msg->cnoc_cmds_data[1][0] =  0x60000001;
>  }
>  
> +static void a640_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
> +{
> +	/*
> +	 * Send a single "off" entry just to get things running
> +	 * TODO: bus scaling
> +	 */
> +	msg->bw_level_num = 1;
> +
> +	msg->ddr_cmds_num = 3;
> +	msg->ddr_wait_bitmask = 0x01;
> +
> +	msg->ddr_cmds_addrs[0] = 0x50000;
> +	msg->ddr_cmds_addrs[1] = 0x5003c;
> +	msg->ddr_cmds_addrs[2] = 0x5000c;
> +
> +	msg->ddr_cmds_data[0][0] =  0x40000000;
> +	msg->ddr_cmds_data[0][1] =  0x40000000;
> +	msg->ddr_cmds_data[0][2] =  0x40000000;
> +
> +	/*
> +	 * These are the CX (CNOC) votes - these are used by the GMU but the
> +	 * votes are known and fixed for the target
> +	 */
> +	msg->cnoc_cmds_num = 3;
> +	msg->cnoc_wait_bitmask = 0x01;
> +
> +	msg->cnoc_cmds_addrs[0] = 0x50034;
> +	msg->cnoc_cmds_addrs[1] = 0x5007c;
> +	msg->cnoc_cmds_addrs[2] = 0x5004c;
> +
> +	msg->cnoc_cmds_data[0][0] =  0x40000000;
> +	msg->cnoc_cmds_data[0][1] =  0x00000000;
> +	msg->cnoc_cmds_data[0][2] =  0x40000000;
> +
> +	msg->cnoc_cmds_data[1][0] =  0x60000001;
> +	msg->cnoc_cmds_data[1][1] =  0x20000001;
> +	msg->cnoc_cmds_data[1][2] =  0x60000001;
> +}
> +
> +static void a650_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
> +{
> +	/*
> +	 * Send a single "off" entry just to get things running
> +	 * TODO: bus scaling
> +	 */
> +	msg->bw_level_num = 1;
> +
> +	msg->ddr_cmds_num = 3;
> +	msg->ddr_wait_bitmask = 0x01;
> +
> +	msg->ddr_cmds_addrs[0] = 0x50000;
> +	msg->ddr_cmds_addrs[1] = 0x50004;
> +	msg->ddr_cmds_addrs[2] = 0x5007c;
> +
> +	msg->ddr_cmds_data[0][0] =  0x40000000;
> +	msg->ddr_cmds_data[0][1] =  0x40000000;
> +	msg->ddr_cmds_data[0][2] =  0x40000000;
> +
> +	/*
> +	 * These are the CX (CNOC) votes - these are used by the GMU but the
> +	 * votes are known and fixed for the target
> +	 */
> +	msg->cnoc_cmds_num = 1;
> +	msg->cnoc_wait_bitmask = 0x01;
> +
> +	msg->cnoc_cmds_addrs[0] = 0x500a4;
> +	msg->cnoc_cmds_data[0][0] =  0x40000000;
> +	msg->cnoc_cmds_data[1][0] =  0x60000001;
> +}
> +
>  static void a6xx_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
>  {
>  	/* Send a single "off" entry since the 630 GMU doesn't do bus scaling */
> @@ -327,6 +397,10 @@ static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu)
>  
>  	if (adreno_is_a618(adreno_gpu))
>  		a618_build_bw_table(&msg);
> +	else if (adreno_is_a640(adreno_gpu))
> +		a640_build_bw_table(&msg);
> +	else if (adreno_is_a650(adreno_gpu))
> +		a650_build_bw_table(&msg);
>  	else
>  		a6xx_build_bw_table(&msg);
>  
> -- 
> 2.26.1
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

      reply	other threads:[~2020-07-10 17:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  3:09 Jonathan Marek
2020-07-10 17:33 ` Jordan Crouse [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200710173318.GE21059@jcrouse1-lnx.qualcomm.com \
    --to=jcrouse@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkp@intel.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®