From: Daniel Vetter <daniel@ffwll.ch>
To: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: airlied@linux.ie, daniel@ffwll.ch,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: Re: [PATCH] drm/i810: switch from 'pci_' to 'dma_' API
Date: Mon, 20 Jul 2020 09:27:04 +0200 [thread overview]
Message-ID: <20200720072704.GT3278063@phenom.ffwll.local> (raw)
In-Reply-To: <20200718072822.339064-1-christophe.jaillet@wanadoo.fr>
On Sat, Jul 18, 2020 at 09:28:22AM +0200, Christophe JAILLET wrote:
> The wrappers in include/linux/pci-dma-compat.h should go away.
>
> The patch has been generated with the coccinelle script below and has been
> hand modified to replace GFP_ with a correct flag.
> It has been compile tested.
>
> When memory is allocated in 'i810_dma_initialize()' GFP_KERNEL can be used
> because its only caller, 'i810_dma_init()', already use it and no lock is
> taken in the between.
>
>
> @@
> @@
> - PCI_DMA_BIDIRECTIONAL
> + DMA_BIDIRECTIONAL
>
> @@
> @@
> - PCI_DMA_TODEVICE
> + DMA_TO_DEVICE
>
> @@
> @@
> - PCI_DMA_FROMDEVICE
> + DMA_FROM_DEVICE
>
> @@
> @@
> - PCI_DMA_NONE
> + DMA_NONE
>
> @@
> expression e1, e2, e3;
> @@
> - pci_alloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3;
> @@
> - pci_zalloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_free_consistent(e1, e2, e3, e4)
> + dma_free_coherent(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_single(e1, e2, e3, e4)
> + dma_map_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_single(e1, e2, e3, e4)
> + dma_unmap_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4, e5;
> @@
> - pci_map_page(e1, e2, e3, e4, e5)
> + dma_map_page(&e1->dev, e2, e3, e4, e5)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_page(e1, e2, e3, e4)
> + dma_unmap_page(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_sg(e1, e2, e3, e4)
> + dma_map_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_sg(e1, e2, e3, e4)
> + dma_unmap_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
> + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_device(e1, e2, e3, e4)
> + dma_sync_single_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
> + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_device(e1, e2, e3, e4)
> + dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2;
> @@
> - pci_dma_mapping_error(e1, e2)
> + dma_mapping_error(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_dma_mask(e1, e2)
> + dma_set_mask(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_consistent_dma_mask(e1, e2)
> + dma_set_coherent_mask(&e1->dev, e2)
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Applied to drm-misc-next. Since we're already past -rc6 I think it'll go
into 5.10.
Thanks, Daniel
> ---
> If needed, see post from Christoph Hellwig on the kernel-janitors ML:
> https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
> ---
> drivers/gpu/drm/i810/i810_dma.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
> index b88c3d5f92b4..303c2d483c6e 100644
> --- a/drivers/gpu/drm/i810/i810_dma.c
> +++ b/drivers/gpu/drm/i810/i810_dma.c
> @@ -220,9 +220,9 @@ static int i810_dma_cleanup(struct drm_device *dev)
> if (dev_priv->ring.virtual_start)
> drm_legacy_ioremapfree(&dev_priv->ring.map, dev);
> if (dev_priv->hw_status_page) {
> - pci_free_consistent(dev->pdev, PAGE_SIZE,
> - dev_priv->hw_status_page,
> - dev_priv->dma_status_page);
> + dma_free_coherent(&dev->pdev->dev, PAGE_SIZE,
> + dev_priv->hw_status_page,
> + dev_priv->dma_status_page);
> }
> kfree(dev->dev_private);
> dev->dev_private = NULL;
> @@ -398,8 +398,8 @@ static int i810_dma_initialize(struct drm_device *dev,
>
> /* Program Hardware Status Page */
> dev_priv->hw_status_page =
> - pci_zalloc_consistent(dev->pdev, PAGE_SIZE,
> - &dev_priv->dma_status_page);
> + dma_alloc_coherent(&dev->pdev->dev, PAGE_SIZE,
> + &dev_priv->dma_status_page, GFP_KERNEL);
> if (!dev_priv->hw_status_page) {
> dev->dev_private = (void *)dev_priv;
> i810_dma_cleanup(dev);
> --
> 2.25.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
prev parent reply other threads:[~2020-07-20 7:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-18 7:28 Christophe JAILLET
2020-07-20 7:27 ` Daniel Vetter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200720072704.GT3278063@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=airlied@linux.ie \
--cc=christophe.jaillet@wanadoo.fr \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome