From: Alexander Lobakin <alobakin@marvell.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Alexander Lobakin <alobakin@marvell.com>,
Igor Russkikh <irusskikh@marvell.com>,
Michal Kalderon <michal.kalderon@marvell.com>,
"Ariel Elior" <aelior@marvell.com>,
Denis Bolotin <denis.bolotin@marvell.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Andrew Lunn <andrew@lunn.ch>, <GR-everest-linux-l2@marvell.com>,
<QLogic-Storage-Upstream@marvell.com>, <netdev@vger.kernel.org>,
<linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 net-next 12/16] qed: remove unused qed_hw_info::port_mode and QED_PORT_MODE
Date: Mon, 20 Jul 2020 21:08:11 +0300 [thread overview]
Message-ID: <20200720180815.107-13-alobakin@marvell.com> (raw)
In-Reply-To: <20200720180815.107-1-alobakin@marvell.com>
Struct field qed_hw_info::port_mode isn't used anywhere in the code, so
can be safely removed to prevent possible dead code addition.
Also remove the enumeration QED_PORT_MODE orphaned after this deletion.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
---
drivers/net/ethernet/qlogic/qed/qed.h | 15 ---------------
drivers/net/ethernet/qlogic/qed/qed_dev.c | 21 ---------------------
2 files changed, 36 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index e2d7a4bbab53..47da4f7d3be2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -245,20 +245,6 @@ enum QED_FEATURE {
QED_MAX_FEATURES,
};
-enum QED_PORT_MODE {
- QED_PORT_MODE_DE_2X40G,
- QED_PORT_MODE_DE_2X50G,
- QED_PORT_MODE_DE_1X100G,
- QED_PORT_MODE_DE_4X10G_F,
- QED_PORT_MODE_DE_4X10G_E,
- QED_PORT_MODE_DE_4X20G,
- QED_PORT_MODE_DE_1X40G,
- QED_PORT_MODE_DE_2X25G,
- QED_PORT_MODE_DE_1X25G,
- QED_PORT_MODE_DE_4X25G,
- QED_PORT_MODE_DE_2X10G,
-};
-
enum qed_dev_cap {
QED_DEV_CAP_ETH,
QED_DEV_CAP_FCOE,
@@ -337,7 +323,6 @@ struct qed_hw_info {
struct qed_igu_info *p_igu_info;
- u32 port_mode;
u32 hw_mode;
unsigned long device_capabilities;
u16 mtu;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index d929556247a5..eaf37822fed7 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -3994,37 +3994,16 @@ static int qed_hw_get_nvm_info(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
switch ((core_cfg & NVM_CFG1_GLOB_NETWORK_PORT_MODE_MASK) >>
NVM_CFG1_GLOB_NETWORK_PORT_MODE_OFFSET) {
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_BB_2X40G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_2X40G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_2X50G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_2X50G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_BB_1X100G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_1X100G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_4X10G_F:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_4X10G_F;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_BB_4X10G_E:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_4X10G_E;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_BB_4X20G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_4X20G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_1X40G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_1X40G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_2X25G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_2X25G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_2X10G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_2X10G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_1X25G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_1X25G;
- break;
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_4X25G:
- p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_4X25G;
break;
default:
DP_NOTICE(p_hwfn, "Unknown port mode in 0x%08x\n", core_cfg);
--
2.25.1
next prev parent reply other threads:[~2020-07-20 18:10 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-20 18:07 [PATCH v3 net-next 00/16] qed, qede: add support for new operating modes Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 01/16] linkmode: introduce linkmode_intersects() Alexander Lobakin
2020-07-20 18:31 ` Andrew Lunn
2020-07-20 18:08 ` [PATCH v3 net-next 02/16] qed, qede, qedf: convert link mode from u32 to ETHTOOL_LINK_MODE Alexander Lobakin
2020-07-20 18:34 ` Andrew Lunn
2020-07-20 18:08 ` [PATCH v3 net-next 03/16] qede: populate supported link modes maps on module init Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 04/16] qed: reformat public_port::transceiver_data a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 05/16] qed: add support for multi-rate transceivers Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 06/16] qed: use transceiver data to fill link partner's advertising speeds Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 07/16] qed: reformat several structures a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 08/16] qed: add support for Forward Error Correction Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 09/16] qede: format qede{,_vf}_ethtool_ops Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 10/16] qede: introduce support for FEC control Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 11/16] qed: reformat several structures a bit Alexander Lobakin
2020-07-20 18:08 ` Alexander Lobakin [this message]
2020-07-20 18:08 ` [PATCH v3 net-next 13/16] qed: add support for new port modes Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 14/16] qed: add missing loopback modes Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 15/16] qed: populate supported link modes maps on module init Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 16/16] qed: add support for the extended speed and FEC modes Alexander Lobakin
2020-07-21 0:14 ` [PATCH v3 net-next 00/16] qed, qede: add support for new operating modes Jakub Kicinski
2020-07-21 1:00 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200720180815.107-13-alobakin@marvell.com \
--to=alobakin@marvell.com \
--cc=GR-everest-linux-l2@marvell.com \
--cc=QLogic-Storage-Upstream@marvell.com \
--cc=aelior@marvell.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=denis.bolotin@marvell.com \
--cc=irusskikh@marvell.com \
--cc=jejb@linux.ibm.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=michal.kalderon@marvell.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®