From: Alexander Lobakin <alobakin@marvell.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Alexander Lobakin <alobakin@marvell.com>,
Igor Russkikh <irusskikh@marvell.com>,
Michal Kalderon <michal.kalderon@marvell.com>,
"Ariel Elior" <aelior@marvell.com>,
Denis Bolotin <denis.bolotin@marvell.com>,
"Tomer Tayar" <tomer.tayar@marvell.com>,
<GR-everest-linux-l2@marvell.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH net 2/2] qed: suppress false-positives interrupt error messages on HW init
Date: Tue, 21 Jul 2020 17:41:43 +0300 [thread overview]
Message-ID: <20200721144143.379-3-alobakin@marvell.com> (raw)
In-Reply-To: <20200721144143.379-1-alobakin@marvell.com>
It was found that qed_pglueb_rbc_attn_handler() can produce a lot of
false-positive error detections on driver load/reload (especially after
crashes/recoveries) and spam the kernel log:
[ 4.958275] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d00ff0
[ 2079.146764] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2116.374631] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2135.250564] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[...]
Reduce the logging level of two false-positive prone error messages from
notice to verbose on initialization (only) to not mix it with real error
attentions while debugging.
Fixes: 666db4862f2d ("qed: Revise load sequence to avoid PCI errors")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_int.c | 50 +++++++++++++----------
drivers/net/ethernet/qlogic/qed/qed_int.h | 4 +-
3 files changed, 32 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 9c26fde663b3..dbdac983ccde 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -3102,7 +3102,7 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params)
}
/* Log and clear previous pglue_b errors if such exist */
- qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt);
+ qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt, true);
/* Enable the PF's internal FID_enable in the PXP */
rc = qed_pglueb_set_pfid_enable(p_hwfn, p_hwfn->p_main_ptt,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 7e13a9d9b89c..5eec1fc6229d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -257,9 +257,10 @@ static int qed_grc_attn_cb(struct qed_hwfn *p_hwfn)
#define PGLUE_ATTENTION_ZLR_VALID (1 << 25)
#define PGLUE_ATTENTION_ILT_VALID (1 << 23)
-int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn,
- struct qed_ptt *p_ptt)
+int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+ bool hw_init)
{
+ char msg[256];
u32 tmp;
tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS2);
@@ -273,22 +274,23 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn,
details = qed_rd(p_hwfn, p_ptt,
PGLUE_B_REG_TX_ERR_WR_DETAILS);
- DP_NOTICE(p_hwfn,
- "Illegal write by chip to [%08x:%08x] blocked.\n"
- "Details: %08x [PFID %02x, VFID %02x, VF_VALID %02x]\n"
- "Details2 %08x [Was_error %02x BME deassert %02x FID_enable deassert %02x]\n",
- addr_hi, addr_lo, details,
- (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_PFID),
- (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VFID),
- GET_FIELD(details,
- PGLUE_ATTENTION_DETAILS_VF_VALID) ? 1 : 0,
- tmp,
- GET_FIELD(tmp,
- PGLUE_ATTENTION_DETAILS2_WAS_ERR) ? 1 : 0,
- GET_FIELD(tmp,
- PGLUE_ATTENTION_DETAILS2_BME) ? 1 : 0,
- GET_FIELD(tmp,
- PGLUE_ATTENTION_DETAILS2_FID_EN) ? 1 : 0);
+ snprintf(msg, sizeof(msg),
+ "Illegal write by chip to [%08x:%08x] blocked.\n"
+ "Details: %08x [PFID %02x, VFID %02x, VF_VALID %02x]\n"
+ "Details2 %08x [Was_error %02x BME deassert %02x FID_enable deassert %02x]",
+ addr_hi, addr_lo, details,
+ (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_PFID),
+ (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VFID),
+ !!GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VF_VALID),
+ tmp,
+ !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_WAS_ERR),
+ !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_BME),
+ !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_FID_EN));
+
+ if (hw_init)
+ DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "%s\n", msg);
+ else
+ DP_NOTICE(p_hwfn, "%s\n", msg);
}
tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_RD_DETAILS2);
@@ -321,8 +323,14 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn,
}
tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS_ICPL);
- if (tmp & PGLUE_ATTENTION_ICPL_VALID)
- DP_NOTICE(p_hwfn, "ICPL error - %08x\n", tmp);
+ if (tmp & PGLUE_ATTENTION_ICPL_VALID) {
+ snprintf(msg, sizeof(msg), "ICPL error - %08x", tmp);
+
+ if (hw_init)
+ DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "%s\n", msg);
+ else
+ DP_NOTICE(p_hwfn, "%s\n", msg);
+ }
tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_MASTER_ZLR_ERR_DETAILS);
if (tmp & PGLUE_ATTENTION_ZLR_VALID) {
@@ -361,7 +369,7 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn,
static int qed_pglueb_rbc_attn_cb(struct qed_hwfn *p_hwfn)
{
- return qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_dpc_ptt);
+ return qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_dpc_ptt, false);
}
static int qed_fw_assertion(struct qed_hwfn *p_hwfn)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h
index e09db3386367..110169e90121 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.h
@@ -442,7 +442,7 @@ int qed_int_set_timer_res(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
#define QED_MAPPING_MEMORY_SIZE(dev) (NUM_OF_SBS(dev))
-int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn,
- struct qed_ptt *p_ptt);
+int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+ bool hw_init);
#endif
--
2.25.1
next prev parent reply other threads:[~2020-07-21 14:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-21 14:41 [PATCH net 0/2] qed: suppress irrelevant " Alexander Lobakin
2020-07-21 14:41 ` [PATCH net 1/2] qed: suppress "don't support RoCE & iWARP" flooding " Alexander Lobakin
2020-07-21 14:41 ` Alexander Lobakin [this message]
2020-07-21 23:07 ` [PATCH net 0/2] qed: suppress irrelevant error messages " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200721144143.379-3-alobakin@marvell.com \
--to=alobakin@marvell.com \
--cc=GR-everest-linux-l2@marvell.com \
--cc=aelior@marvell.com \
--cc=davem@davemloft.net \
--cc=denis.bolotin@marvell.com \
--cc=irusskikh@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.kalderon@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=tomer.tayar@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®