mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Brian Norris <briannorris@chromium.org>
To: Benson Leung <bleung@chromium.org>,
	Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Guenter Roeck <groeck@chromium.org>
Cc: <linux-kernel@vger.kernel.org>, Brian Norris <briannorris@chromium.org>
Subject: [PATCH v2 1/2] platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs
Date: Fri, 24 Jul 2020 12:08:40 -0700	[thread overview]
Message-ID: <20200724190841.3112365-1-briannorris@chromium.org> (raw)

ECs that don't implement EC_CMD_HOST_EVENT_GET_WAKE_MASK should still
have some reasonable default mask -- otherwise, they'll treat a variety
of EC signals as spurious wakeups. Battery and AC events can be
especially common, for devices that have been sitting at full charge
plugged into AC for a long time, as they may cycle their charging off
and on, or their battery may start reporting failures as it ages.

Treating these as wakeups does not serve a useful purpose, and is
instead often counterproductive. And indeed, later ECs (that implement
the mask) don't include these events in their wake-mask.

Note that this patch doesn't do anything without the subsequent patch
("platform/chrome: cros_ec_proto: check for missing
EC_CMD_HOST_EVENT_GET_WAKE_MASK"), because
cros_ec_get_host_event_wake_mask() currently does not return an error if
EC_CMD_HOST_EVENT_GET_WAKE_MASK is not implemented.

Some additional notes:
While the EC typically knows not to wake the CPU for these unimportant
events once the CPU reaches a sleep state, it doesn't really have a way
to know that the CPU is "almost" asleep, unless it has support for
EC_CMD_HOST_SLEEP_EVENT. Alas, these older ECs do not support that
command either, so this solution is not 100% complete.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---
v2:
 * more notes in commit message
---
 drivers/platform/chrome/cros_ec_proto.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 3e745e0fe092..e93024b55ce8 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -469,14 +469,26 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev)
 						    &ver_mask);
 	ec_dev->host_sleep_v1 = (ret >= 0 && (ver_mask & EC_VER_MASK(1)));
 
-	/*
-	 * Get host event wake mask, assume all events are wake events
-	 * if unavailable.
-	 */
+	/* Get host event wake mask. */
 	ret = cros_ec_get_host_event_wake_mask(ec_dev, proto_msg,
 					       &ec_dev->host_event_wake_mask);
-	if (ret < 0)
-		ec_dev->host_event_wake_mask = U32_MAX;
+	if (ret < 0) {
+		/*
+		 * If the EC doesn't support EC_CMD_HOST_EVENT_GET_WAKE_MASK,
+		 * use a reasonable default. Note that we ignore various
+		 * battery, AC status, and power-state events, because (a)
+		 * those can be quite common (e.g., when sitting at full
+		 * charge, on AC) and (b) these are not actionable wake events;
+		 * if anything, we'd like to continue suspending (to save
+		 * power), not wake up.
+		 */
+		ec_dev->host_event_wake_mask = U32_MAX &
+			~(BIT(EC_HOST_EVENT_AC_DISCONNECTED) |
+			  BIT(EC_HOST_EVENT_BATTERY_LOW) |
+			  BIT(EC_HOST_EVENT_BATTERY_CRITICAL) |
+			  BIT(EC_HOST_EVENT_PD_MCU) |
+			  BIT(EC_HOST_EVENT_BATTERY_STATUS));
+	}
 
 	ret = 0;
 
-- 
2.28.0.rc0.142.g3c755180ce-goog


             reply	other threads:[~2020-07-24 19:08 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24 19:08 Brian Norris [this message]
2020-07-24 19:08 ` [PATCH v2 2/2] platform/chrome: cros_ec_proto: check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK Brian Norris
2020-08-17 11:31   ` Enric Balletbo i Serra
2020-08-17 11:30 ` [PATCH v2 1/2] platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs Enric Balletbo i Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200724190841.3112365-1-briannorris@chromium.org \
    --to=briannorris@chromium.org \
    --cc=bleung@chromium.org \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®