From: "Pali Rohár" <pali@kernel.org>
To: Rob Herring <robh@kernel.org>
Cc: "Marek Behún" <marek.behun@nic.cz>,
linux-pci@vger.kernel.org,
"Tomasz Maciej Nowak" <tmn505@gmail.com>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
linux-kernel@vger.kernel.org, "Andrew Lunn" <andrew@lunn.ch>,
Xogium <contact@xogium.me>
Subject: Re: [PATCH 4/5] PCI: aardvark: Implement driver 'remove' function and allow to build it as module
Date: Mon, 3 Aug 2020 16:46:34 +0200 [thread overview]
Message-ID: <20200803144634.nr5cjddyvdnv3lxo@pali> (raw)
In-Reply-To: <20200729184809.GA569408@bogus>
On Wednesday 29 July 2020 12:48:09 Rob Herring wrote:
> On Wed, Jul 15, 2020 at 04:25:56PM +0200, Marek Behún wrote:
> > From: Pali Rohár <pali@kernel.org>
> >
> > Providing driver's 'remove' function allows kernel to bind and unbind devices
> > from aardvark driver. It also allows to build aardvark driver as a module.
> >
> > Compiling aardvark as a module simplifies development and debugging of
> > this driver as it can be reloaded at runtime without the need to reboot
> > to new kernel.
> >
> > Signed-off-by: Pali Rohár <pali@kernel.org>
> > Reviewed-by: Marek Behún <marek.behun@nic.cz>
> > ---
> > drivers/pci/controller/Kconfig | 2 +-
> > drivers/pci/controller/pci-aardvark.c | 25 ++++++++++++++++++++++---
> > 2 files changed, 23 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> > index adddf21fa381..f9da5ff2c517 100644
> > --- a/drivers/pci/controller/Kconfig
> > +++ b/drivers/pci/controller/Kconfig
> > @@ -12,7 +12,7 @@ config PCI_MVEBU
> > select PCI_BRIDGE_EMUL
> >
> > config PCI_AARDVARK
> > - bool "Aardvark PCIe controller"
> > + tristate "Aardvark PCIe controller"
> > depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST
> > depends on OF
> > depends on PCI_MSI_IRQ_DOMAIN
> > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> > index d5f58684d962..0a5aa6d77f5d 100644
> > --- a/drivers/pci/controller/pci-aardvark.c
> > +++ b/drivers/pci/controller/pci-aardvark.c
> > @@ -14,6 +14,7 @@
> > #include <linux/irq.h>
> > #include <linux/irqdomain.h>
> > #include <linux/kernel.h>
> > +#include <linux/module.h>
> > #include <linux/pci.h>
> > #include <linux/init.h>
> > #include <linux/phy/phy.h>
> > @@ -1114,6 +1115,7 @@ static int advk_pcie_probe(struct platform_device *pdev)
> >
> > pcie = pci_host_bridge_priv(bridge);
> > pcie->pdev = pdev;
> > + platform_set_drvdata(pdev, pcie);
> >
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > pcie->base = devm_ioremap_resource(dev, res);
> > @@ -1204,18 +1206,35 @@ static int advk_pcie_probe(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int advk_pcie_remove(struct platform_device *pdev)
> > +{
> > + struct advk_pcie *pcie = platform_get_drvdata(pdev);
> > + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
> > +
> > + pci_stop_root_bus(bridge->bus);
> > + pci_remove_root_bus(bridge->bus);
>
> Based on pci_host_common_remove() implementation, doesn't this need a
> lock around it (pci_lock_rescan_remove)?
Well, I'm not sure. I looked into other pci drivers and none of
following drivers pci-tegra.c, pcie-altera.c, pcie-brcmstb.c,
pcie-iproc.c, pcie-mediatek.c, pcie-rockchip-host.c calls
pci_lock_rescan_remove() and pci_unlock_rescan_remove().
Only pci-host-common.c and pci-hyperv.c protect pci_stop_root_bus() and
pci_remove_root_bus() by locks.
> We should probably have a common function (say pci_bridge_remove) to
> implement this. You could use pci_host_common_remove(), but you'd have
> to adjust drvdata.
Ok, I agree that some common function could be useful as the same code
(pci_stop_root_bus(); pci_remove_root_bus();) is called in more pci
drivers.
But first we need to know if locks are required or not.
> > +
> > + advk_pcie_remove_msi_irq_domain(pcie);
> > + advk_pcie_remove_irq_domain(pcie);
> > +
> > + return 0;
> > +}
> > +
> > static const struct of_device_id advk_pcie_of_match_table[] = {
> > { .compatible = "marvell,armada-3700-pcie", },
> > {},
> > };
> > +MODULE_DEVICE_TABLE(of, advk_pcie_of_match_table);
> >
> > static struct platform_driver advk_pcie_driver = {
> > .driver = {
> > .name = "advk-pcie",
> > .of_match_table = advk_pcie_of_match_table,
> > - /* Driver unloading/unbinding currently not supported */
> > - .suppress_bind_attrs = true,
> > },
> > .probe = advk_pcie_probe,
> > + .remove = advk_pcie_remove,
> > };
> > -builtin_platform_driver(advk_pcie_driver);
> > +module_platform_driver(advk_pcie_driver);
> > +
> > +MODULE_DESCRIPTION("Aardvark PCIe controller");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.26.2
> >
next prev parent reply other threads:[~2020-08-03 14:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 14:25 [PATCH 0/5] PCIe aardvark controller improvements Marek Behún
2020-07-15 14:25 ` [PATCH 1/5] PCI: aardvark: Fix compilation on s390 Marek Behún
2020-07-15 14:25 ` [PATCH 2/5] PCI: aardvark: Check for errors from pci_bridge_emul_init() call Marek Behún
2020-07-15 14:25 ` [PATCH 3/5] PCI: pci-bridge-emul: Export API functions Marek Behún
2020-07-15 14:25 ` [PATCH 4/5] PCI: aardvark: Implement driver 'remove' function and allow to build it as module Marek Behún
2020-07-29 18:48 ` Rob Herring
2020-08-03 14:46 ` Pali Rohár [this message]
2020-08-03 20:00 ` Rob Herring
2020-08-04 7:24 ` Pali Rohár
2020-07-15 14:25 ` [PATCH 5/5] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200803144634.nr5cjddyvdnv3lxo@pali \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=bhelgaas@google.com \
--cc=contact@xogium.me \
--cc=gregory.clement@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marek.behun@nic.cz \
--cc=robh@kernel.org \
--cc=tmn505@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®