From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>,
"David S . Miller" <davem@davemloft.net>,
"Sasha Levin" <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.7 44/54] macvlan: validate setting of multiple remote source MAC addresses
Date: Mon, 24 Aug 2020 12:36:23 -0400 [thread overview]
Message-ID: <20200824163634.606093-44-sashal@kernel.org> (raw)
In-Reply-To: <20200824163634.606093-1-sashal@kernel.org>
From: Alvin Šipraga <alsi@bang-olufsen.dk>
[ Upstream commit 8b61fba503904acae24aeb2bd5569b4d6544d48f ]
Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.
iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:
# ip link add link eth0 name macvlan0 type macvlan mode source
# ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
RTNETLINK answers: Cannot assign requested address
# ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
# ip -d link show macvlan0
5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...
With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/macvlan.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index e900ebb94499d..b0c34906cad47 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -1259,6 +1259,9 @@ static void macvlan_port_destroy(struct net_device *dev)
static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
+ struct nlattr *nla, *head;
+ int rem, len;
+
if (tb[IFLA_ADDRESS]) {
if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
return -EINVAL;
@@ -1306,6 +1309,20 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
return -EADDRNOTAVAIL;
}
+ if (data[IFLA_MACVLAN_MACADDR_DATA]) {
+ head = nla_data(data[IFLA_MACVLAN_MACADDR_DATA]);
+ len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
+
+ nla_for_each_attr(nla, head, len, rem) {
+ if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
+ nla_len(nla) != ETH_ALEN)
+ return -EINVAL;
+
+ if (!is_valid_ether_addr(nla_data(nla)))
+ return -EADDRNOTAVAIL;
+ }
+ }
+
if (data[IFLA_MACVLAN_MACADDR_COUNT])
return -EINVAL;
@@ -1362,10 +1379,6 @@ static int macvlan_changelink_sources(struct macvlan_dev *vlan, u32 mode,
len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
nla_for_each_attr(nla, head, len, rem) {
- if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
- nla_len(nla) != ETH_ALEN)
- continue;
-
addr = nla_data(nla);
ret = macvlan_hash_add_source(vlan, addr);
if (ret)
--
2.25.1
next prev parent reply other threads:[~2020-08-24 17:09 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-24 16:35 [PATCH AUTOSEL 5.7 01/54] spi: stm32: clear only asserted irq flags on interrupt Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 02/54] jbd2: make sure jh have b_transaction set in refile/unfile_buffer Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 03/54] ext4: don't BUG on inconsistent journal feature Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 04/54] ext4: handle read only external journal device Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 05/54] drm/virtio: fix memory leak in virtio_gpu_cleanup_object() Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 06/54] ext4: abort the filesystem if failed to async write metadata buffer Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 07/54] jbd2: abort journal if free a async write error " Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 08/54] ext4: handle option set by mount flags correctly Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 09/54] ext4: handle error of ext4_setup_system_zone() on remount Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 10/54] ext4: correctly restore system zone info when remount fails Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 11/54] fs: prevent BUG_ON in submit_bh_wbc() Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 12/54] spi: stm32h7: fix race condition at end of transfer Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 13/54] spi: stm32: fix fifo threshold level in case of short transfer Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 14/54] spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 15/54] spi: stm32: always perform registers configuration prior to transfer Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 16/54] drm/amd/powerplay: correct Vega20 cached smu feature state Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 17/54] drm/amd/powerplay: correct UVD/VCE PG state on custom pptable uploading Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 18/54] drm/amd/display: Fix LFC multiplier changing erratically Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 19/54] drm/amd/display: Switch to immediate mode for updating infopackets Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 20/54] selftests/bpf: Fix segmentation fault in test_progs Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 21/54] libbpf: Handle GCC built-in types for Arm NEON Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 22/54] netfilter: avoid ipv6 -> nf_defrag_ipv6 module dependency Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 23/54] libbpf: Prevent overriding errno when logging errors Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 24/54] selftests/bpf: Fix btf_dump test cases on 32-bit arches Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 25/54] selftests/bpf: Correct various core_reloc 64-bit assumptions Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 26/54] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 27/54] drivers/net/wan/hdlc_x25: Added needed_headroom and a skb->len check Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 28/54] ALSA: hda/realtek: Add model alc298-samsung-headphone Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 29/54] s390/cio: add cond_resched() in the slow_eval_known_fn() loop Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 30/54] ASoC: wm8994: Avoid attempts to read unreadable registers Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 31/54] ALSA: usb-audio: ignore broken processing/extension unit Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 32/54] selftests: disable rp_filter for icmp_redirect.sh Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 33/54] scsi: fcoe: Fix I/O path allocation Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 34/54] scsi: ufs: Fix possible infinite loop in ufshcd_hold Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 35/54] scsi: ufs: Improve interrupt handling for shared interrupts Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 36/54] scsi: ufs: Clean up completed request without interrupt notification Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 37/54] scsi: qla2xxx: Flush all sessions on zone disable Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 38/54] scsi: qla2xxx: Flush I/O " Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 39/54] scsi: qla2xxx: Indicate correct supported speeds for Mezz card Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 40/54] scsi: qla2xxx: Fix login timeout Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 41/54] scsi: qla2xxx: Check if FW supports MQ before enabling Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 42/54] scsi: qla2xxx: Fix null pointer access during disconnect from subsystem Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 43/54] Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command" Sasha Levin
2020-08-24 16:36 ` Sasha Levin [this message]
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 45/54] net: gianfar: Add of_node_put() before goto statement Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 46/54] drm/amdgpu: disable gfxoff for navy_flounder Sasha Levin
2020-08-24 18:24 ` Alex Deucher
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 47/54] drm/amdgpu: fix NULL pointer access issue when unloading driver Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 48/54] drm/amdkfd: fix the wrong sdma instance query for renoir Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 49/54] Revert "drm/amdgpu: disable gfxoff for navy_flounder" Sasha Levin
2020-08-24 18:24 ` Alex Deucher
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 50/54] powerpc/perf: Fix soft lockups due to missed interrupt accounting Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 51/54] libbpf: Fix map index used in error message Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 52/54] bpf: selftests: global_funcs: Check err_str before strstr Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 53/54] arm64: Move handling of erratum 1418040 into C code Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 54/54] arm64: Allow booting of late CPUs affected by erratum 1418040 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200824163634.606093-44-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alsi@bang-olufsen.dk \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome