From: Dan Murphy <dmurphy@ti.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>,
<tiwai@suse.com>, <robh@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH] ASoC: tlv320adcx140: Add digital mic channel enable routing
Date: Fri, 28 Aug 2020 06:28:55 -0500 [thread overview]
Message-ID: <20200828112855.10112-1-dmurphy@ti.com> (raw)
Add the audio routing map to enable the digital mic paths when the
analog mic paths are not enabled.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
sound/soc/codecs/tlv320adcx140.c | 37 ++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 5cd50d841177..5d1b2a03f0ac 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -412,6 +412,16 @@ static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = {
SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0),
SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0),
+ SND_SOC_DAPM_ADC("CH1_DIG", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0),
+ SND_SOC_DAPM_ADC("CH2_DIG", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0),
+ SND_SOC_DAPM_ADC("CH3_DIG", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0),
+ SND_SOC_DAPM_ADC("CH4_DIG", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0),
+ SND_SOC_DAPM_ADC("CH5_DIG", "CH5 Capture", ADCX140_IN_CH_EN, 3, 0),
+ SND_SOC_DAPM_ADC("CH6_DIG", "CH6 Capture", ADCX140_IN_CH_EN, 2, 0),
+ SND_SOC_DAPM_ADC("CH7_DIG", "CH7 Capture", ADCX140_IN_CH_EN, 1, 0),
+ SND_SOC_DAPM_ADC("CH8_DIG", "CH8 Capture", ADCX140_IN_CH_EN, 0, 0),
+
+
SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0,
&adcx140_dapm_ch1_en_switch),
SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0,
@@ -470,6 +480,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = {
{"CH3_ASI_EN", "Switch", "CH3_ADC"},
{"CH4_ASI_EN", "Switch", "CH4_ADC"},
+ {"CH1_ASI_EN", "Switch", "CH1_DIG"},
+ {"CH2_ASI_EN", "Switch", "CH2_DIG"},
+ {"CH3_ASI_EN", "Switch", "CH3_DIG"},
+ {"CH4_ASI_EN", "Switch", "CH4_DIG"},
+ {"CH5_ASI_EN", "Switch", "CH5_DIG"},
+ {"CH6_ASI_EN", "Switch", "CH6_DIG"},
+ {"CH7_ASI_EN", "Switch", "CH7_DIG"},
+ {"CH8_ASI_EN", "Switch", "CH8_DIG"},
+
{"CH5_ASI_EN", "Switch", "CH5_OUT"},
{"CH6_ASI_EN", "Switch", "CH6_OUT"},
{"CH7_ASI_EN", "Switch", "CH7_OUT"},
@@ -541,6 +560,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = {
{"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"},
{"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"},
+ {"MIC1P Input Mux", NULL, "CH1_DIG"},
+ {"MIC1M Input Mux", NULL, "CH2_DIG"},
+ {"MIC2P Input Mux", NULL, "CH3_DIG"},
+ {"MIC2M Input Mux", NULL, "CH4_DIG"},
+ {"MIC3P Input Mux", NULL, "CH5_DIG"},
+ {"MIC3M Input Mux", NULL, "CH6_DIG"},
+ {"MIC4P Input Mux", NULL, "CH7_DIG"},
+ {"MIC4M Input Mux", NULL, "CH8_DIG"},
+
{"MIC1 Analog Mux", "Line In", "MIC1P"},
{"MIC2 Analog Mux", "Line In", "MIC2P"},
{"MIC3 Analog Mux", "Line In", "MIC3P"},
@@ -554,6 +582,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = {
{"MIC3M Input Mux", "Analog", "MIC3M"},
{"MIC4P Input Mux", "Analog", "MIC4P"},
{"MIC4M Input Mux", "Analog", "MIC4M"},
+
+ {"MIC1P Input Mux", "Digital", "MIC1P"},
+ {"MIC1M Input Mux", "Digital", "MIC1M"},
+ {"MIC2P Input Mux", "Digital", "MIC2P"},
+ {"MIC2M Input Mux", "Digital", "MIC2M"},
+ {"MIC3P Input Mux", "Digital", "MIC3P"},
+ {"MIC3M Input Mux", "Digital", "MIC3M"},
+ {"MIC4P Input Mux", "Digital", "MIC4P"},
+ {"MIC4M Input Mux", "Digital", "MIC4M"},
};
static const struct snd_kcontrol_new adcx140_snd_controls[] = {
--
2.28.0
next reply other threads:[~2020-08-28 11:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-28 11:28 Dan Murphy [this message]
2020-08-28 14:50 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200828112855.10112-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®