[PATCH] ARM: dts: imx6q-icore-ofcap10: Use 10.1" Ampire panel compatible

[Jagan Teki <jagan@amarulasolutions.com>]

Adding display timings directly on device tree files make it difficult
to maintain as a same copy of timings may exist on different files or
panel-simple driver.

We have a panel-simple driver for this particular usage so supporting
on this driver will help to use the same timings on any device tree
files if the board mounted on a similar vendor display.

Engicam C.TOUCH OF 10.1" LCD board uses Ampire 10.1" TFT LCD and
it has supported by panel-simple already, so simply use that binding.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Note:
Panel patch in ML already,
https://lkml.org/lkml/2020/8/28/685

 arch/arm/boot/dts/imx6q-icore-ofcap10.dts | 28 +++++++++++++----------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
index 81cc346dd149..02aca1e28ce3 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
@@ -12,6 +12,17 @@
 / {
 	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
 	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &ldb {
@@ -22,18 +33,11 @@ lvds-channel@0 {
 		fsl,data-width = <24>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <60000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <40>;
-				hfront-porch = <40>;
-				vback-porch = <10>;
-				vfront-porch = <3>;
-				hsync-len = <80>;
-				vsync-len = <10>;
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
-- 
2.25.1