Re: 答复: [PATCH v2 6/6] drm/panel: Add Ilitek ILI9341 DBI panel driver

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Paul,

On Sun, Aug 30, 2020 at 06:48:12PM +0200, Paul Cercueil wrote:
> Le dim. 30 août 2020 à 16:36, 何小龙 (Leon He) a écrit :
> >>  +struct ili9341 {
> >>  +       struct drm_panel panel;
> >>  +       struct mipi_dsi_device *dsi;
> >>  +       const struct ili9341_pdata *pdata;
> >>  +
> >>  +       struct gpio_desc        *reset_gpiod;
> >>  +       u32 rotation;
> >>  +};
> >>  +
> > 
> > Hi Paul, you put the mipi_dsi_device inside the struct. I think it 
> > maybe not
> > a good idea. That means the panel has a MIPI-DSI interface but it 
> > doesn't
> > have actually.
> > 
> >>  +static int ili9341_probe(struct mipi_dsi_device *dsi)
> >>  +{
> >>  +       struct device *dev = &dsi->dev;
> >>  +       struct ili9341 *priv;
> >>  +       int ret;
> >>  +
> >>  +       /* See comment for mipi_dbi_spi_init() */
> >>  +       if (!dev->coherent_dma_mask) {
> >>  +               ret = dma_coerce_mask_and_coherent(dev, 
> >> DMA_BIT_MASK(32));
> >>  +               if (ret) {
> >>  +                       dev_warn(dev, "Failed to set dma mask 
> >> %d\n", ret);
> >>  +                       return ret;
> >>  +               }
> >>  +       }
> >>  +
> >>  +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> >>  +       if (!priv)
> >>  +               return -ENOMEM;
> >>  +
> >>  +       mipi_dsi_set_drvdata(dsi, priv);
> >>  +       priv->dsi = dsi;
> >>  +
> >>  +       device_property_read_u32(dev, "rotation", &priv->rotation);
> >>  +
> >>  +       priv->pdata = device_get_match_data(dev);
> >>  +       if (!priv->pdata)
> >>  +               return -EINVAL;
> >>  +
> >>  +       drm_panel_init(&priv->panel, dev, &ili9341_funcs,
> >>  +                      DRM_MODE_CONNECTOR_DPI);
> >>  +
> >>  +       priv->reset_gpiod = devm_gpiod_get(dev, "reset", 
> >> GPIOD_OUT_HIGH);
> >>  +       if (IS_ERR(priv->reset_gpiod)) {
> >>  +               dev_err(dev, "Couldn't get our reset GPIO\n");
> >>  +               return PTR_ERR(priv->reset_gpiod);
> >>  +       }
> >>  +
> >>  +       ret = drm_panel_of_backlight(&priv->panel);
> >>  +       if (ret < 0) {
> >>  +               if (ret != -EPROBE_DEFER)
> >>  +                       dev_err(dev, "Failed to get backlight 
> >> handle\n");
> >>  +               return ret;
> >>  +       }
> >>  +
> >>  +       drm_panel_add(&priv->panel);
> >>  +
> >>  +       dsi->bus_type = priv->pdata->bus_type;
> >>  +       dsi->lanes = priv->pdata->lanes;
> >>  +       dsi->format = MIPI_DSI_FMT_RGB565;
> >>  +
> >>  +       ret = mipi_dsi_attach(dsi);
> >>  +       if (ret) {
> >>  +               dev_err(dev, "Failed to attach DSI panel\n");
> >>  +               goto err_panel_remove;
> >>  +       }
> >>  +
> >>  +       ret = mipi_dsi_maybe_register_tiny_driver(dsi);
> >>  +       if (ret) {
> >>  +               dev_err(dev, "Failed to init TinyDRM driver\n");
> >>  +               goto err_mipi_dsi_detach;
> >>  +       }
> >>  +
> >>  +       return 0;
> >>  +
> >>  +err_mipi_dsi_detach:
> >>  +       mipi_dsi_detach(dsi);
> >>  +err_panel_remove:
> >>  +       drm_panel_remove(&priv->panel);
> >>  +       return ret;
> >>  +}
> >>  +
> >>  +static int ili9341_remove(struct mipi_dsi_device *dsi)
> >>  +{
> >>  +       struct ili9341 *priv = mipi_dsi_get_drvdata(dsi);
> >>  +
> >>  +       mipi_dsi_detach(dsi);
> >>  +       drm_panel_remove(&priv->panel);
> >>  +
> >>  +       drm_panel_disable(&priv->panel);
> >>  +       drm_panel_unprepare(&priv->panel);
> >>  +
> >>  +       return 0;
> >>  +}
> >>  +
> >>  +static const struct ili9341_pdata yx240qv29_pdata = {
> >>  +       .mode = { DRM_SIMPLE_MODE(240, 320, 37, 49) },
> >>  +       .width_mm = 0, // TODO
> >>  +       .height_mm = 0, // TODO
> >>  +       .bus_type = MIPI_DCS_BUS_TYPE_DBI_SPI_C3,
> >>  +       .lanes = 1,
> >>  +};
> >>  +
> >>  +static const struct of_device_id ili9341_of_match[] = {
> >>  +       { .compatible = "adafruit,yx240qv29", .data = 
> >> &yx240qv29_pdata },
> >>  +       { }
> >>  +};
> >>  +MODULE_DEVICE_TABLE(of, ili9341_of_match);
> >>  +
> >>  +static struct mipi_dsi_driver ili9341_dsi_driver = {
> >>  +       .probe          = ili9341_probe,
> >>  +       .remove         = ili9341_remove,
> >>  +       .driver = {
> >>  +               .name           = "ili9341-dsi",
> >>  +               .of_match_table = ili9341_of_match,
> >>  +       },
> >>  +};
> >>  +module_mipi_dsi_driver(ili9341_dsi_driver);
> > 
> > Again, you treat this driver as a mipi dsi driver but for a MIPI-DBI 
> > (I8080/SPI)
> > panel device. That will make developers confused.
> > 
> > Is it possible to just add a mipi_dbi_driver for I8080/SPI interface 
> > panel?
> > Thanks!
> 
> Please read the cover letter, it explains why it's done this way. The 
> whole point of this patchset is to merge DSI and DBI frameworks in a 
> way that can be maintained.

I think this proves the point that the proposed naming is confusing. At
least a rename would be required.

-- 
Regards,

Laurent Pinchart