From: Badhri Jagan Sridharan <badhri@google.com>
To: Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v6 14/14] usb: typec: tcpci_maxim: Implemnent set_auto_vbus_discharge_threshold
Date: Mon, 31 Aug 2020 19:59:27 -0700 [thread overview]
Message-ID: <20200901025927.3596190-15-badhri@google.com> (raw)
In-Reply-To: <20200901025927.3596190-1-badhri@google.com>
Programs VBUS_SINK_DISCONNECT_THRESHOLD based on the power_role,
voltage requested as sink, mode of operation.
The programmed threshold is based on vSinkDisconnect and
vSinkDisconnectPD values.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
Changes since v1:
- Changing patch version to v6 to fix version number confusion.
---
drivers/usb/typec/tcpm/tcpci_maxim.c | 48 ++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
index 6ba808ad901a..e35bd995c037 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -137,6 +137,52 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
return;
}
+static int max_tcpci_set_auto_vbus_discharge_threshold(struct tcpci *tcpci, struct tcpci_data *data,
+ enum typec_role port_role,
+ enum typec_pwr_opmode mode, bool pps_active,
+ u32 requested_vbus_voltage_mv)
+{
+ struct max_tcpci_chip *chip = tdata_to_max_tcpci(data);
+ u32 threshold = 0;
+ u8 pwr_ctrl;
+
+ /*
+ * Indicates that vbus is going to go away due PR_SWAP, hard reset etc.
+ * Do not discharge vbus here.
+ */
+ if (requested_vbus_voltage_mv == 0)
+ goto write_thresh;
+
+ if (port_role == TYPEC_SINK) {
+ max_tcpci_read8(chip, TCPC_POWER_CTRL, &pwr_ctrl);
+ if (pwr_ctrl & TCPC_FAST_ROLE_SWAP_EN) {
+ /* To prevent disconnect when the source is fast role swap is capable. */
+ threshold = 3500;
+ } else if (mode == TYPEC_PWR_MODE_PD) {
+ if (pps_active)
+ threshold = (95 * requested_vbus_voltage_mv / 100) - 850;
+ else
+ threshold = (95 * requested_vbus_voltage_mv / 100) - 1250;
+ } else {
+ /* 3.5V for non-pd sink */
+ threshold = 3500;
+ }
+ } else {
+ /* 4V for source */
+ threshold = 4000;
+ }
+
+ threshold = threshold / TCPC_VBUS_SINK_DISCONNECT_THRESH_LSB;
+
+ if (threshold > TCPC_VBUS_SINK_DISCONNECT_THRESH_MAX) {
+ dev_err(chip->dev, "VBUS_SINK_DISCONNECT_THRESH out of range");
+ return -EINVAL;
+ }
+
+write_thresh:
+ return max_tcpci_write16(chip, TCPC_VBUS_SINK_DISCONNECT_THRESH, threshold);
+}
+
static void process_rx(struct max_tcpci_chip *chip, u16 status)
{
struct pd_message msg;
@@ -454,6 +500,8 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id
chip->data.start_drp_toggling = max_tcpci_start_toggling;
chip->data.TX_BUF_BYTE_x_hidden = true;
chip->data.init = tcpci_init;
+ chip->data.set_auto_vbus_discharge_threshold = max_tcpci_set_auto_vbus_discharge_threshold;
+ chip->data.auto_discharge_disconnect = true;
max_tcpci_init_regs(chip);
chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
--
2.28.0.402.g5ffc5be6b7-goog
next prev parent reply other threads:[~2020-09-01 3:00 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 2:59 [PATCH v6 00/14] TCPM support for FRS and AutoDischarge Disconnect Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 01/14] usb: typec: tcpci: Add register definitions to tcpci Badhri Jagan Sridharan
2020-09-15 12:10 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 02/14] usb: typec: tcpci: Add support when hidden tx registers are inaccessible Badhri Jagan Sridharan
2020-09-15 12:11 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 03/14] usb: typec: tcpci: update ROLE_CONTROL for DRP Badhri Jagan Sridharan
2020-09-15 12:12 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 04/14] usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference Badhri Jagan Sridharan
2020-09-15 12:16 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 05/14] usb: typec: tcpci: Add set_vbus tcpci callback Badhri Jagan Sridharan
2020-09-15 12:22 ` Heikki Krogerus
2020-09-16 9:07 ` Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 06/14] dt-bindings: usb: Maxim type-c controller device tree binding document Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 07/14] usb: typec: tcpci_maxim: Chip level TCPC driver Badhri Jagan Sridharan
2020-09-15 12:43 ` Heikki Krogerus
2020-09-16 9:34 ` Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 08/14] dt-bindings: connector: Add property to set initial current cap for FRS Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 09/14] usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) Badhri Jagan Sridharan
2020-09-15 13:20 ` Heikki Krogerus
2020-09-17 10:23 ` Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 10/14] usb: typec: tcpci: Implement callbacks for FRS Badhri Jagan Sridharan
2020-09-15 13:23 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 11/14] usb: typec: tcpci_maxim: Add support for Sink FRS Badhri Jagan Sridharan
2020-09-15 13:25 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 12/14] usb: typec: tcpm: Implement enabling Auto Discharge disconnect support Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 13/14] usb: typec: tcpci: Implement Auto discharge disconnect callbacks Badhri Jagan Sridharan
2020-09-01 2:59 ` Badhri Jagan Sridharan [this message]
2020-09-15 12:09 ` [PATCH v6 00/14] TCPM support for FRS and AutoDischarge Disconnect Heikki Krogerus
2020-09-15 16:57 ` Badhri Jagan Sridharan
2020-09-15 13:33 ` Heikki Krogerus
2020-09-15 16:59 ` Badhri Jagan Sridharan
2020-09-16 11:05 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200901025927.3596190-15-badhri@google.com \
--to=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®