mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@iki.fi>,
	Hans Verkuil <hverkuil@xs4all.nl>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Prabhakar <prabhakar.csengg@gmail.com>
Subject: Re: [PATCH v3 2/2] media: i2c: ov772x: Add test pattern control
Date: Fri, 4 Sep 2020 04:28:47 +0300	[thread overview]
Message-ID: <20200904012847.GB9369@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20200824190406.27478-3-prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi Prabhakar,

Thank you for the patch.

On Mon, Aug 24, 2020 at 08:04:06PM +0100, Lad Prabhakar wrote:
> Add support for test pattern control supported by the sensor.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
>  drivers/media/i2c/ov772x.c | 25 ++++++++++++++++++++++++-
>  include/media/i2c/ov772x.h |  1 +
>  2 files changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index 67764d647526..f267d8abd742 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -227,7 +227,7 @@
>  
>  /* COM3 */
>  #define SWAP_MASK       (SWAP_RGB | SWAP_YUV | SWAP_ML)
> -#define IMG_MASK        (VFLIP_IMG | HFLIP_IMG)
> +#define IMG_MASK        (VFLIP_IMG | HFLIP_IMG | SCOLOR_TEST)
>  
>  #define VFLIP_IMG       0x80	/* Vertical flip image ON/OFF selection */
>  #define HFLIP_IMG       0x40	/* Horizontal mirror image ON/OFF selection */
> @@ -425,6 +425,7 @@ struct ov772x_priv {
>  	const struct ov772x_win_size     *win;
>  	struct v4l2_ctrl		 *vflip_ctrl;
>  	struct v4l2_ctrl		 *hflip_ctrl;
> +	unsigned int			  test_pattern;
>  	/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
>  	struct v4l2_ctrl		 *band_filter_ctrl;
>  	unsigned int			  fps;
> @@ -540,6 +541,11 @@ static const struct ov772x_win_size ov772x_win_sizes[] = {
>  	},
>  };
>  
> +static const char * const ov772x_test_pattern_menu[] = {
> +	"Disabled",
> +	"Vertical Color Bar Type 1",
> +};
> +
>  /*
>   * frame rate settings lists
>   */
> @@ -762,6 +768,13 @@ static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
>  	return ret;
>  }
>  
> +static int ov772x_enable_test_pattern(struct ov772x_priv *priv, u32 pattern)
> +{
> +	priv->test_pattern = pattern;
> +	return regmap_update_bits(priv->regmap, COM3, SCOLOR_TEST,
> +				  pattern ? SCOLOR_TEST : 0x00);
> +}
> +
>  static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
>  {
>  	struct ov772x_priv *priv = container_of(ctrl->handler,
> @@ -809,6 +822,8 @@ static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
>  		}
>  
>  		return ret;
> +	case V4L2_CID_TEST_PATTERN:
> +		return ov772x_enable_test_pattern(priv, ctrl->val);
>  	}
>  
>  	return -EINVAL;
> @@ -1103,10 +1118,14 @@ static int ov772x_set_params(struct ov772x_priv *priv,
>  		val |= VFLIP_IMG;
>  	if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
>  		val |= HFLIP_IMG;
> +	if (priv->info && (priv->info->flags & OV772X_FLAG_TEST_PATTERN))
> +		val |= SCOLOR_TEST;

Why do you need this new flag ? First of all flags are only used on
systems that use platform data, which has been deprecated in favour of
DT for a long time, and then I don't see a need to enable the test
pattern from platform data.

>  	if (priv->vflip_ctrl->val)
>  		val ^= VFLIP_IMG;
>  	if (priv->hflip_ctrl->val)
>  		val ^= HFLIP_IMG;
> +	if (priv->test_pattern)
> +		val ^= SCOLOR_TEST;

It would be nice if we could replace the manual handling of controls in
this function by a call to v4l2_ctrl_handler_setup(), but that's a
candidate for a separate patch.

>  
>  	ret = regmap_update_bits(priv->regmap, COM3, SWAP_MASK | IMG_MASK, val);
>  	if (ret < 0)
> @@ -1404,6 +1423,10 @@ static int ov772x_probe(struct i2c_client *client)
>  	priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
>  						   V4L2_CID_BAND_STOP_FILTER,
>  						   0, 256, 1, 0);
> +	v4l2_ctrl_new_std_menu_items(&priv->hdl, &ov772x_ctrl_ops,
> +				     V4L2_CID_TEST_PATTERN,
> +				     ARRAY_SIZE(ov772x_test_pattern_menu) - 1,
> +				     0, 0, ov772x_test_pattern_menu);
>  	priv->subdev.ctrl_handler = &priv->hdl;
>  	if (priv->hdl.error) {
>  		ret = priv->hdl.error;
> diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
> index a1702d420087..65e6f8d2f4bb 100644
> --- a/include/media/i2c/ov772x.h
> +++ b/include/media/i2c/ov772x.h
> @@ -12,6 +12,7 @@
>  /* for flags */
>  #define OV772X_FLAG_VFLIP	(1 << 0) /* Vertical flip image */
>  #define OV772X_FLAG_HFLIP	(1 << 1) /* Horizontal flip image */
> +#define OV772X_FLAG_TEST_PATTERN	(1 << 2) /* Test pattern */
>  
>  /*
>   * for Edge ctrl

-- 
Regards,

Laurent Pinchart

      parent reply	other threads:[~2020-09-04  1:29 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-24 19:04 [PATCH v3 0/2] media: i2c: ov772x: Enable BT656 mode and test pattern support Lad Prabhakar
2020-08-24 19:04 ` [PATCH v3 1/2] media: i2c: ov772x: Add support for BT656 mode Lad Prabhakar
2020-09-03 15:59   ` Jacopo Mondi
2020-09-04  1:20   ` Laurent Pinchart
2020-09-04  7:55     ` Jacopo Mondi
2020-09-04  8:21       ` Sakari Ailus
2020-09-04  9:20         ` Jacopo Mondi
2020-09-04  9:36           ` Sakari Ailus
2020-09-04 10:35             ` Jacopo Mondi
2020-09-04 11:00               ` Sakari Ailus
2020-09-04 13:48                 ` Laurent Pinchart
2020-09-04 19:51                   ` Sakari Ailus
2020-09-04 13:29         ` Laurent Pinchart
2020-08-24 19:04 ` [PATCH v3 2/2] media: i2c: ov772x: Add test pattern control Lad Prabhakar
2020-09-03 16:11   ` Jacopo Mondi
2020-09-04  1:28   ` Laurent Pinchart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200904012847.GB9369@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=hverkuil@xs4all.nl \
    --cc=jacopo@jmondi.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=prabhakar.csengg@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=sakari.ailus@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®